How do I delete that pesky default publish folder that is created when I make an new hard drive publish service?I don't want the standard publish folder because I only need several smart publish folders.
The italicized Untitled Export publish folder is the one in question.There doesn't seem to be an option to delete the folder when I right click on it. If I right click on any other publish folder, there is an option to delete the folder.
Just downloaded LR 5 and noticed that I cannot jump back from a Publish Service folder preview to a different folder preview in grid mode. The only way to view photos in another folder is to restart LR 5. This only happens when I am viewing photos in a Publish Service such as Flickr. Â I updated from LR 4 using Creative Cloud installer.
Is there a way to publish a mirrored copy of a collection including having all of the sub folder hierarchy intact? I am trying to start an account on SmugMug and I do not want to have to replicate all of my work on collections and smart collections for the publish section. I just want to publish exact copies of them to SmugMug. Why can't we just drag a collection into a published service?
how to change the publish settings so that it prompts asking for a location to save when I publish to PDF? Right now it's just saving to the default output location and I need it to ask every time where I want to save the file.
after 2013 was installed in my colleagues computer he now has the option to include Layouts when opening the publishing command, which didn't happen before. It is a slight pain removing these from the selection to be published and I was wondering how I get it to only select models and not layouts when opening the publish command as default.
some way to specify where PS CS3 will look for files and where to save files. I do not want my CS3 files to be saved to the default locations, and it is a waste of time to have to re-direct PS every time I what to open or save a file.
I have just aquired a copy of my great grandmother, unfortunatly it came from a newspaper or a magazine. However I would like to remove the halftoning and then later colorize it. The latter should be no problem as I've done tht before, but those pesky halftones have me stumped. I have tried using gaussian blur and unsharp mask but it looks a bit iffy if you know what I mean.
I have a titleblock block with a tiff image inserted signature. With imageframe set to 0, the frame is gone and the titleblock prints fine. When this titleblock is inserted into a drawng sheet and the drawing sheet is set to imageframe - 0. The frame around the signature is visible and it prints.
When importing something off of a DVD or CD how do I direct Lightroom to copy the imported images or folder to a specific folder on my hard drive? It seems to default to MyCatalog but leaves the location on the CD rather than copying it to the drive. If I remove the CD the images is reported as missing.
When I go to the top of the screen for importing I can change the source but the location info on the right is not active or changeable.I am new to lightroom and coming from Photoshop Elements background.
I have another question about installing LR5. How do I manage to install the program to a special folder and not the custom folder on drive c:? Â I just run the installation through application manager. I set the installation folder within my presets to d:adobe...
But anyway it was installed on hard drive c:  A direct download of the installer from adobe is not possible unfortunately.
I was in the process of moving a folder inside or LR. I might have clicked and moved it twice since it was very slow. LR wasn't able to complete the move and gave me an error message. After I clicked "OK" on the error message, I wasn't able to find my folder/images from the old or new location. I did a spotlight search on my mac, but I wasn't able to find them anywhere. Where has my folder/images gone? I tried to locate them without any success.
I've got about 10,000 photos that I've moved in lightroom by creating a folder called 'pictures' on the external drive using the left folders panel. I then selected all the images in the root drive on my computer and dragged them onto the 'pictures' folder on the external drive, and I expected the folder structure to come with it. Only after I realised that they had all moved into one folder. Is there a way of moving the images back into a structure without manually doing it? Here's a screenshot.....
Im using the most recent version of Lightroom 5.3 (updated through CC - even though this has shown up on previous version) on Windows 7 and all the folders in my library are showing up with the directory path in front of my folder names. How can I get rid of this? I do not see any options in preferences to turn this off. I have also turned off preferences in Windows > Folder Options Control Panel "Display full Path in Title bar" option. Â I have Lightroom on several computers and have set up preferences the same on each workstation, and this only shows up on one workstation.
I just copied around 30GB of photos from my Mac laptop to a secondary internal drive that I placed in my Mac desktop. I then copied the Catalog from my laptop and put it in my primary drive on my Mac desktop. I double-clicked on the Catalog and it seemed to open everything up. I clicked on some keywords and it is finding the images. I never used LR for anything other than adding multiple keywords to all of my images. Â 1. However, the folder section on the left has question marks next to each and every folder that displays in that section. Why does it have the question marks and what do I need to do to remove them? Â 2. Do I need to do anything else to ensure the transfer is complete?
I installed Photoshop CS6 on my iMac and MacBook. The MacBook has a "Default Actions" folder in the actions panel with 13 default actions. This folder did not appear on my iMac following install. However, my iMac has several image and text effect actions installed that did not install on my iMac. Would like to have the Default Actions on my iMac and text and image effect actions on my MacBook.
I set lightroom 3 to monitor the folder that my Eye Fi card feeds to but I couldn't see how to do this without also setting the "move to" setting...is there a way to do this to just have Light room recognize when new pics come in and not move them?
I have recently upgraded to LR5.3 and have now noticed an issue when importing photos. When importing in to one folder (as a sub folder), the photos are imported correctly, - on disk they appear in the correct place, howevr in the folder panel, the sub-folder is shown outside of the main folder.  Imort settings are:
Note , on disk the folder '20131226 - Boxing Day' appears correctly (These are all under a root folder 'Photos - LR Masters')
However, in the LR Folder Panel, the folder '20131226 - Boxong Day' appears outside of the 'Photos - LR Masters' Â Â If I attempt to move the folder by dragging, I get an error that the folder already exists.
There is a folder on my hard drive that does not appear in the list of folders in the import dialog. I have tried expanding all the other folders around it (my photos are filed by date of capture) to see if it was somehow imported as a subfolder. It is simply not there. I can find and open it and access all the pictures in Photoshop Elements but not in Lightroom 4.
I'm using CS5.5/Photoshop5.1 Â I have about 1000 folders all that have a file inside called; sample.jpg. I need to resize each of them and I have to use the Save For Web option so that these files are as small as possible. Save As makes the images too big. My plan was to make an action and batch process the files. It's easy enough to open all the documents, within the root directory, that are called, sample.jpg, by using the finder search features, but what I can't seem to do is get the Save to Web option to recognize the image's source folder. If I create an action, I see that the location I used when I created the action, is hard coded, so all I'm able to do is overwrite the same file, over and over again.
I've been trying to install autocad but seem to fail because of my installation path?
I'm pretty confused of the fact that the installation path is not my default folder and when I tried to change it back, there's no way to do so. I've attached a copy of what's happening whenever I try to install it to have a better understanding of the issue. I thought it was my computer at first, but I checked all my settings and my installation path is steadily in (C folder..however autocad aims to be installed in a different path (D and then freezes. I clicked on all 3 options at the bottom (Installation - system requirements...) but nothing allows me to change back my path folder so that the installation can take place.
Any way to allow a user to choose a folder from a default location. I thought I had found the solution but it's not quite working as I wanted: Â #target illustrator
//Example 1 var output_folder = Folder.selectDialog ('Choose PDF output folder.');
//Example 2 var myFolder=Folder(app.activeDocument.path).selectDlg("Choose PDF output folder:"); Â If I use the code in example 1 the choose folder dialog appears and the 'Open' button is available and when I press the button the location is chosen as expected. However if I use the code in example 2, although the choose window opens in the path of the active documents location the 'Open' button is not able to be pressed until I select a folder., which means that the chosen location is not correct. I should indicate that I'm running this code on a Mac. Â Any way to have a choose folder dialog window specify a location and be able to select that.
By default, PSE uses the Windows preferred location for this user. I have a folder that is easier to access, simply D:Scans, and I have to enter this manually, as well as removing the default to set up a folder with "today's date" every time I do a scan. I would like to modify these default settings. Surely those locations must be held in an installed file somewhere, and so if I can just edit that file I'd be very happy.
Everytime I do a command where I have to select something, such as move, copy, etc., this pesky "selection" box comes up. This started just a couple of days ago and is annoying. What setting I need to change to get the box to go away?Â
