I have a titleblock block with a tiff image inserted signature. With imageframe set to 0, the frame is gone and the titleblock prints fine. When this titleblock is inserted into a drawng sheet and the drawing sheet is set to imageframe - 0. The frame around the signature is visible and it prints.
View 9 Replies
Everytime I do a command where I have to select something, such as move, copy, etc., this pesky "selection" box comes up. This started just a couple of days ago and is annoying. What setting I need to change to get the box to go away?
View 4 Replies View RelatedWhat options do I have to remove 'busy' backgrounds from photographs?
Many of my pictures are taken at home and I want to focus upon the wife and kids, not the sofa or curtains.
I've tried the magic wand and select similar and I've tried the magnetic lasoo - whilst both are good, they're not quite there.
I have just aquired a copy of my great grandmother, unfortunatly it came from a newspaper or a magazine. However I would like to remove the halftoning and then later colorize it. The latter should be no problem as I've done tht before, but those pesky halftones have me stumped. I have tried using gaussian blur and unsharp mask but it looks a bit iffy if you know what I mean.
View 9 Replies View RelatedHow do I delete that pesky default publish folder that is created when I make an new hard drive publish service?I don't want the standard publish folder because I only need several smart publish folders.
The italicized Untitled Export publish folder is the one in question.There doesn't seem to be an option to delete the folder when I right click on it. If I right click on any other publish folder, there is an option to delete the folder.
We've all seen this:
Adding strokes to an object, often text (in this case outlined/expanded text), and there develops little unsightly "negative space shapes".
The white stroke has an Offset Path added to it.
How to dynamically rid an object of these? Tried drawing little paths over them, grouping them with the compound text path and using Pathfinder > Add effect . . . but nope.
The workarounds are obvious -
1) Expand everything, delete the unwanted bits.
2) Draw solid paths over the negative spaces that match the bg, like the pic below:
using Photoshop 5.0 or 7.0
I want to have a gif animation working on a web page - and I want to put a window frame around it so it seems like you are watching the animated image through a window looking into a house. (like a window peeper)
What I need to do is take out the four window pains (or all if I have to) to make the actual pains transparent to show the gif image working.
I am not sure how I can get to superimpose the window frame image OVER the gif image.
After using Custom Profile for Frame Generator, the Part List will show total length, not individually. How to split these frame members?
View 2 Replies View RelatedI created an extruded aluminium profile (attached file: Item Profile 8 80x80) which I published into the Content Center. When using this profile in a frame design, and using the Trim To Frame command, the profiles are trimmed at a weird angle (attached pdf file).
View 2 Replies View RelatedAfter using Custom Profile for Frame Generator, the Part List will show total length, not individually. how to split these frame members?
Inventor Professional 2013 SP1.1
Windows 7 Pro 64-bit, SP1
HP EliteBook 8460w; 8 GB RAM; i7 - 2.0 GHz; AMD Firepro M3900 -1 GB
There should be a way to Notch a straight frame to a curved frame! I want to laser cut the tube, so I really need to trim one tube to a curve tube.
View 8 Replies View RelatedI come across this problem from time to time and generally either just ignore it, if the detail is destined for in house manufacture, or alter it in autocad if it's destined for exterior suppliers.
Our guard frames are manufactured from extruded aluminum section (made by a company called palletti) I have when needed created a new frame generator frame member for each new x-section that we wish to use. I then draw a 2d sketch for the base frame skeleton and then a 3d sketch for all the frame work above. This I then use in an assembly to create the framework. This framework assembly then goes into a second assembly where the framework is then adorned with all the accoutrements that make up a guard frame that we can then order as an assembled frame, panels feet, hinges et al.
When placing the views for the detailing of the second assembly sometimes the view will show the wrong length for one or some of the frame members.
;note how the left and right views are different and how some of the frame members are elongated on the lh view.
I'm guessing its because of the home grown frame members but all seems to work well other wise and this only happens infrequently.
HP z210 16Gb ATI FirePro5800
Autodesk Produst design Suite 2012
I have downloaded something called frames from the net. They look black and white. Some sort of masks. I guess they are to be applied over a photo to give them a framed, ripped, custom look. How to I apply that to the image. I am running CS@ for Windows.
View 2 Replies View RelatedIs it possible to get rid of the frame on an image and still drag it?
View 4 Replies View RelatedI have just started to use a Canon 5DMkIII and have used the camera crop feature set to 4:5 thinking that this is just for viewing purposes during composition of the image in the camera. When I came to import my RAW files into LR4, I realise that the images are already cropped and all I can see is the image between the guide lines in the camera. The camera, however still shows the whole image and so I assume that all the data was captured.
How to get the full frame image in LR?
How do I exporting one frame as an image?
View 1 Replies View RelatedI'm a beginner of 3ds max. I have trouble with getting alpha image from Vray frame buffer.
My scene is very simple
-2 Objects with Vray standard material
-Vray plane
-Vray dome light
Even when I render as Tiff data, I can not see alpha image. It is all white. How to get alpha image. And also is there anything else good way to get alpha image by the each object(without using matt/shadow material)? I used 'VrayWireColor' from 'Render Elements' but the image edge has slightly white frindge...
A book scan produced about 250 images (one per page) that have gray around the edges where the old paper was yellowed (almost brown). I want to write a batch program to place a white frame of a specified width around the perimeter of the images to eliminate this unwanted gray. How can I do this?
View 3 Replies View RelatedHow do I add a photo frame to an image ? by using layers ? Where can I get some nice frames ?
View 2 Replies View RelatedI am just getting back into using Elements and sometimes have a hard time figuring things out....
I recently attempted to use the "Create Photobook" feature and had this problem, some of the photos I wanted to use would not fit into the predetermined frame, I tried teh resize tool however that just seemed to grab teh frame and move or resize it not the photo in it.... is there anyway to select the photo in the frame and apply the resize...
How do you add a Christmas frame to an image in Elements 10?
View 3 Replies View RelatedI have an imported image that needs a 50px black frame with hard edges on the _outside_ of the image.I have found solutions but they do not have mitered corners.I cannot use the canvas size to accomplish this as the canvas contains other objects.
View 12 Replies View RelatedHow do i create the effect above with the image behind the mesh frame?
View 2 Replies View RelatedIm working on a class project and what I wanna do is make two paintings and put one painting in the middle of a picture frame while taking the second painting and making it look like it was painted directly onto a picture frame. I took a photo so you all can better see what i am trying to do in the photo you see a painting of the joker i wanna make that painting look like it was directly hand painted onto the white picture frame. How I can make this happen?
View 1 Replies View Relatedway to make a rounded rectangle frame/border around an image.
View 2 Replies View RelatedWhen you render an shot, is there a way to get the frame number to be included in the rendered image? So that when they are put together into a movie a viewer can pause to see what frame it's on so that accurate critiques can be made.
View 5 Replies View RelatedI was working on it for simpler works, but Now i like to learn more things as a good photo editing tool. I want to make a star shaped, balloon shaped frame with a image of some persons. I have attached a sample image, with person's face blured, I have to keep persons photo in that star shaped frame, ballon shaped frames etc.
Uploaded with ImageShack.us
I am developing a plugin which is supposed to fill contents (text/image) from external source into a ai file that has placeholders. So far I am able to get the text part working using text frames. I am however not able to figure out a way to provide placeholder for image. Is there an equivalent of textframe for image? what are the alternatives?
View 5 Replies View RelatedI tried to load videos from Canon 7D (.mov) and from a Sony NEX-7 (mp4) and either get a message "problem loading file" or the picture frame comes up in Grid View, with no image inside the frame. It shows the length of the video but I cannon see it. Ironically these same files, loaded in LR4, will run in Picasa.
View 4 Replies View RelatedHow does one take an image, shrink it, stretch it, make it smaller etc. Basically, I want to fit an object into a picture frame.
View 4 Replies View RelatedI am currently trying to combine a color photo frame with a black and white image, but every time I open the frame in "open as layers" the frame turns to black and white as well as the photo. I have no problem when using color photos. Is there a way that I can do this so that my photo frame remains it's original color with the black and white photo inside.
View 1 Replies View Related
