Have downloaded L/R5 and am attempting to import for the first time. Source is "EOS_DIGIGTAL" SD card from Canon EOS. All pictures are on the card. When selecting "Import", a new window opens which is a "Copy as DNG" which, during reading all tutorials, is never mentioned. I would like to just import directly from the source card to Macintosh HD. Also, "NO PHOTOS" shows as well.
View 2 RepliesWhen I go to edit a photo in Photoshop CC from Lightroom 5, it opens Photoshop from my backup hard drive and I get this message: "The application has been moved, and its path has changed. To update the product configuration, click Update." This slows down the process. How can I edit the path so that Photoshop opens from my main hard drive?
View 3 Replies View Relatedlightroom 3.6 windows 7. sometimes but not always, when I choose edit and lr creates a copy edit tiff, the new copy moves to the end of the filmstrip and sometimes it stays right with the original (which is what I want)
View 2 Replies View RelatedBefore i import from my SD card into lightroom I create 2 named folders - one on my hard drive and another for back up on my external hd.In LR inport dialogue box I choose the hard drive folder as my main destination and select my ext hard drive folder as my make second copy to folder
I untick the make a second copy to box.I choose Copy and click import..All images are copied OK but only the hard drive folder shows up in the folders display area under library even though the back up copy shows in the ext hard drive folder.
Is it possible to get both folders to show in the display?
When i try to create a new document by file->new after i click ok , it automatically opens the "image size" dialog box.
View 9 Replies View RelatedIn Lightroom 4.2 when open and I want to edit in PSE 10, I go to Photo, edit in PSE 10, and PSE 10 opens, but there is no image. I want to edit in PSE 10 and can't. Using LR 4.2, and attempting to edit in PSE 10, PSE 10 opens but no image opens to edit
View 1 Replies View RelatedAnytime I double-click on an Illustrator file to open it, the Illustrator CS6 window opens up too small to view the file. It comes up with an error message that says "Can't open the illustration. There is not enough room for the window; increase document area and try again."
If I then click on the box to expand the Illustrator window to full-size, then I can open the file. It's just frustrating that everytime I try to open an AI file by double-clicking on it, I get this error message.
Import window does not open automatically as it did in LR3?
View 9 Replies View RelatedLR 5.2 was working beautifully, but after shooting a couple videos (.MOV) in addition to normal images (.JPG & .CR2) my LR 5.2 started playing up when I wanted to import the content of my SD card onto my PC.
LR 5.2 (on Win7, 64-bit) stopped displaying ANY images or movies in the import window. It doesn't matter whether the images (+/- movies) are on the SD card (from which I usually directly import), or any folder on my PC that contains images. LR 5.2 however has no problem displaying the images on my PC in the library window (as they have been imported into the catalog before the problem occurred).
I'm now stuck with hundreds of photos on my SD card that I can't seem to be able to import...
I sometimes get full size previews in the import window (when I double click on a picture in the grid), but usually they are tiny and get extremely pixelated when I try to make them bigger. This makes it very difficult to decide if a picture is good enough to import.
View 1 Replies View RelatedSince I updated to CC I've had a bug that drives me a little nuts. Because I have a Retina MacBook Pro connected to an Apple Thunderbolt display, Photoshop seems to get confused about the size of the window to open. It thinks it should be sized to fit on the Retina screen (which I use as secondary), but at 100% on the non-retina screen (the primary display).
The end result is that every time I open a document the window is only showing the top quarter of the document I'm opening. I always have to hit command plus, command minus to get it displaying right.
Im running Window 7 and autocad 2010. I use window explorer to open dwg files. When i open a new file, it always opens in a new autocad window.
View 4 Replies View RelatedWhen I import files from the M Monochrom there are no actual previews in the import dialog window. Also LR4 does not indicate the aperture used in either the library or develop module.
View 13 Replies View RelatedMy import window does not allow me to pick the "move" option. How do I access it?
View 4 Replies View RelatedWhen I click on the new layer window, half of it opens off the screen (see screenshot). Attached File(s) Gimp Bug.png (59.06K) Number of downloads: 7
View 2 Replies View RelatedFrom LR4 on my desktop PC, I used to be able to select File->Import From Another Catalog..., navigate to a catalog on a networked laptop, select which photos/dates I want to import, then choose to Copy Photos to a New Location and Import. This would both copy the photos over the network to my desktop, and add the photos to my desktop LR catalog - in one step. Always worked great for me for getting travel laptop photos back into my main desktop & LR catalog.
Both desktop and laptop recently upgraded to LR5. But now when I try this same procedure - the "Import From Another Catalog..." dialog no longer has the option to Copy Photos to a New Location and Import. The only options are Add New Photos To Catalog Without Moving and Don't Import New Photos.
Of course I can work around this by doing it with 2-3 extra steps: I can import over the network like above, but choose Add New Photos to Catalog Without Moving and then later copy the files & find the missing photos. Or export to a separate catalog & copy everything, etc.
So what happend to the Copy Photos to a New Location and Import option in LR5? Was this option removed explicitly? Or is there something else I'm missing (file path permissions, etc) that would cause the option to not be shown?
Lightroom 5 64-bit for Windows, ver 5.0
Desktop: Windows 7 64-bit
Laptop: Windows 8 64-bit
I replaced my computer, and now reinstalled lightroom and created a new catalog and wanted to import photos and copy from backup, however, lightroom is not offering me the copy function
View 3 Replies View RelatedI am having a problem with memory. I am running Windows XP with 4GB ram. when i start laying out in paper space, i copy the window in one page or copy multiple pages, every time i copy a page of window my memory builds up & up & up with each one until it gets to over 2 GB & the it tell me that if i continue with this next process CAD will crash because i have maxed out the virtual memory. This is usually not a problem when i am doing smaller one off drawings with a few pages of windows but when i am doing a bigger project with 20+ pages or windows i run out of memory.
I gave the latest file to my business partner & he does not have this problem at all. He can open up many windows & as many pages as Cad will allow. His memory always fluctuates around the same 2GB. He is running Windows 7 with 4 GB ram.
Lr 4.3 ACR 7.3 - unable to view preview files in the import window and/or raw files in the Library?
When will this camera be supported?
I'm trying to synchronize my folders, and LR4 is consistently crashing when it attempts to display the "Import Results" window. This is on Win7 Pro, using LR4 64-bit. A portion of the pix being imported are successfully stored in the catalog, and the remainder are not. When I restart LR and attempt to synchronize again, the process repeats: find the new pictures (the ones that weren't stored in the previous attempt), start importing them, reach apparent 100%, start to display "Import Results" window and immediately crash.
I'd like to reach the point at which no pix remain to be imported.
I've even tried the old open a new file, and import the file that has no render setting information, and that works maybe 10% of the time.
View 1 Replies View RelatedWhat's the difference between "import", "copy", and "move"?
View 3 Replies View RelatedI take images in raw+jpeg formats. Can I use copy as dng to import those images? What happens to the jpeg files?
View 3 Replies View RelatedLR won't hightlight ADD or COPY option when I want to import pictures, I see the word, it just won't give me the option, how do i fix it?
View 1 Replies View RelatedI have a folder of all my photo's with my Sony NEX camera - which I have set to capture RAW+JPEG, so the folder contains a RAW and JPEG copy of each photo.
I've just started using Lightroom and run an import on that folder with 'Copy as DNG', discard duplicates, with the destination directory structure set to use photo dates. The source and destination folders are both on remote directories on my NAS.
After the import I expected to find lots of folders, ordered by date, containing just DNS files. However I find there are DNG and JPEG files for each photo.
My understanding is the standard previews and smart previews are stored locally with the LR catalog. So what are the JPEG files that have been created?
Trying to import images as dng and crashes my computer. It writes to a temp folder and cannot delete the temp folder bc there is error in writing to it. Mac OSX. Have done this many time with no problem. I can make adjustments inside the program and when I export the modified images to another folder it writes to a temp folder as well. but doesnt crash the system.
View 1 Replies View RelatedI had copied a .PNG file into the source folder and wanted to import it into the Lightroom catalog.
However the import dialog does not show that file in the source folder at all.
I also tried the method of selecting the source folder and using the "Synchronize" option. But that did not show the .PNG file either.
My clumsy work-around was to open the file in CS6 and save it as a .JPG file.
So my question: how can I tell Lightroom which file types (extensions) I want to be able to import?
When I import pictures from my SD Card I usually leave copies on the card for a while so I have them as backup, and to also be able to see recent pics on my camera. However each time I go to import pictures from that card within LR, it defaults to selecting all pics on my SD card even though I have the "New Photos" filter selected at the top of the import box. It always puts all my photos in the "New Photos" section, so I have to deselect all the photos that I have already imported into my catalogue so I don't get duplicates. How do I get LR to only import pics that haven't been imported bfore?
I am aware of the "Don't Import Suspected Duplicates" option, but that is not the samea as what I am looking for. It only deselects photos that still exist in my catalogue. Any photos that I have deleted from my catalogue remain selected in the import box as it doesn't see any duplicates.
what I'm missing to have LR only select photos that haven't been previously imported from that card?
Cannot import files into LR 4.4 or LR5 - get this message: ""Some important operations were not performed - Could not copy file to requested location" I could import files a week ago and can do it with LR3 Using an iMac LR4.4 works on the MacPro - maybe the desktop?
View 2 Replies View RelatedI have one user (user 1) who will work on a drawing and while they have it open, another user (user 2) opens the same file and they are prompted it is in use and they can open a read-only copy. Once user 2 opens the read-only copy, user 1 can no longer save their drawing until user 1 closes the read-only copy.
User 1 gets the following error when trying to save:
"Unable to save to drawing X:folderpathfilename.dwg as it is being accessed by another session. Drawing saved to X:folderpathfilename.tmp"
This does not happen everytime either.
Why cant I import my Nikon D800E NEF files in LR 4.3 - just started recently -I have been doing the same thing for months and never had a problem. "unable to copy a file to location"
View 5 Replies View Related