The export works not correct in LR5.3 When the field "Dont enlarge" are activated Lightroom ingnores the settings of image sizing and export the pictures in original size.
View 11 RepliesI want to export images from LR. But when I nominate a size - eg. portrait 5x7", images that are in landscape are resized incorrectly.
View 2 Replies View RelatedI have a designer that created this beautiful (but complicated) design in illustrator and now we're trying to get it exported to html. The thing is, most of the images that are in tds we want to be background images so that we can put stuff on top of it. So we need the exported html to generate the image size correctly. For example, I don't want
<img src="someimage.jpg" width="100" height="100"...
but
<img src="someimage.jpg">
The problem is that illustrator for whatever reason is generating the images slightly too small (I guess to make the image size smaller?), then is stretching them using width and height attributes. As I'm sure you guys are aware of, the background attribute has no way of specifying a width and height.
I am finding that my Lightroom 5 prints are bigger than the settings that I input in the Print module.
View 3 Replies View RelatedWhen exporting an image and specifying to resize 1500 pixels on the long edge I get this result 2541 x 1500, which is exactly the same result when I specify the short edge. I have tried this with cropped images and with uncropped images.
View 3 Replies View RelatedI imported images from my 1D M4 and made themDNG rather than RAW. All the images, JPOG and DNG have a heading in image info at top of the image in Library or Develop as 4.0MP indicating that the information is very small. Canon tells me this camera should show MP as 16-18MP and large prints available. The smmaller bird will not crop to make an image over 4x4 and I pring 8x10. Canon believes it is a LR4 preference issue but I can't locate it in importing. I did note a export image smaller and changed it but regardless, I checked the importing file size and tey are all significant so it is a Adobe LR4 issue and preference somewhere. NAPP says it is not LR4 so I am caught?
View 10 Replies View RelatedI just updated to Camera Raw8.3 and now when I'm in LR5.3 and attempt to edit an image in PS5, the image does not move from LR to PS. Should I just go back to a previous CR version?
View 7 Replies View Relatedhow do I make sure the files i export from lightroom to hard drive are the same large files i imported to lightroom from my camera? I have worked on a collection for many hours and following export to hard drive the file sizes are tiny??
View 3 Replies View RelatedI want to may a small flyer for a party. i want to start a new file. what size do i make my file to fit on a 4 x 6 card, or a card the size of a post card?
i have been able to print these sizes but sometime things get cut off the edges. if i knew what size to start with i could fit everything on the flyer.
I'm a very new user to GIMP but have been using paint shop pro for quite some time - I still use version 7
Here's the situation: I received a pdf that I want to print so I imported it into gimp. It's 8.5x11 at 100dpi & two pages. So I imported it as two images (not layers) at same resolution settings. White out the unnecessary images go to print and then to printer preferences. 300 dpi is the smallest resolution on my printer so I also select 8.5x11 paper & 'sale to fit.' The resulting image is so large that approx only the top-left quarter of the doc prints.
OK, so in GIMP I go to 'Print Size' change the image resolution to 300 pixels: same result, exactly
Print size isn't it, lets try 'Scale Image' at 300 pixels. Same result again...
I tried both settings above with 'scale to fit' (printer) on & off with absolutely no changes to the printed image... very strange. Is gimp overriding my printer settings? If so how do I correct this?
Interestingly, when I re-sized the images in gimp (or thats what I thought I was doing with 'print size' & 'scale image') the size of the view-able image on the desktop in the application window did not change... the size of the window stayed the same, the zoom percentage did not change & most importantly the image did not change.
Finally, I checked if the original image prints correctly in Adobe Reader: No problem and it prints fine. Unfortunately, while I have what I need, I'm not one to give up that easily and want to know if the issue is the printer, gimp.
Why I can't get the image to print in GIMP at the correct size?
Windows XP Home SP3 - I just reformatted the hard drive last week so everything is a new clean install
Hp Officejet 4215 all-in-one
GIMP 2.4.7
Working in CS5.I have a vector image that I need to resize and save as a .png. I first create an artboard to the correct size I need (55x20 pixels), shrink my vector image to fit and then export to .png using the artboard as my boundaries (so that I get the correct size).Problem is, the resulting file is not 55x20, it is 229x83 (when I open in Photoshop). I can't figure out why the file is not saving to the correct size.
I have also tried opening the file in photoshop and resizing down, but that doesn't work either. My image becomes very distorted.I don't generally work in pixels or pngs...what would be the best program and process to do this. It doesn't seem like it should be so difficult, but for some reason it is!
I have created a farm map in AutoCAD 2008. I want to have a sign made with this image on it with dimensions 775mm x 1096mm. I saved this image as an eps file of size A4 and sent it to the sign maker. The sign maker got back to me and told me that when he blew this image up it was blurry and could I please save it at its actual size.
My problem is that I'm not sure how to save this image at this size.
I updraged to Lightroom 5 and noticed that the interface is a lot bigger than Lightroom 4. I have an Acer Aspire S7 which has one of those HiDPI displays. Is there any way to get the interface the size it was in Lightroom 4.
View 3 Replies View RelatedI've just set up a PS plotter as per this link: URL....
Hatches in AutoCAD are being displayed really poorly (see attachment)... Basically they've been simplified to polygons instead of complex regions.
And secondly, my plot is cropped to paper size. The work we're doing is significantly larger then typical paper sizes, I realize I could add a new extremely large paper size, but is there a way to ignore the paper size?
I just noticed yesterday that when I have RAW (DNG) files in my LR5.2 library, I can select the correct lens profile to apply. When I take three of those files and merge them together in Photomatix Pro they come back as a single TIFF file. Now LR only has one lens profile available, and it is the wrong one.
This is happening with my Sony NEX-7 and Tamron 18-200mm f/3.5-6.3 XR DI-III VC. With the RAW files, I have a list of Tamron lenses from which to choose, and the correct one is available. For the merged TIFF file, however, only a single Tamron lens is available for selection, and it is not the lens I used.
I am trying to relink still images in Smoke. I have .tif files and were taken by a still photographer. As I'm relinking to the original sources, Smoke is identifying sequential file names as image sequences and it's not available in the Potential Matches as a link option. For other stills in the same folder where there is a break in a numeric filename sequence, Smoke identifies and relinks just fine.
Is there an option to ignore image sequence identification?
I also run into this for other elements where are numbered by designers like credits_01, credits_02, etc.
Using Extension for Smoke for Mac 2013.
How to ignore white areas in Image Trace
View 5 Replies View RelatedI'm working with a JPEG image sequence, and have deleted frames frames at various points before bringing them into AE. Instead of skipping the missing frames, AE renders missing media frames in place of the ones I deleted, instead of just skipping them. Is there a way around this without having to manually rename all of the images so there are no missing numbers?
View 3 Replies View RelatedOccasionally I export an item but the export size simply never takes on that picture, so I actually have to go thru Photoshop to get the desired size.
View 3 Replies View RelatedI've created an image file in Illustrator and exported it as a .png file. The dimensions are 1000x200 but when I export it the file size changes and becomes bigger. I therefore have to change the file size in Fireworks making sure that the quality is kept as Photoshop does not do it for me. Previously when I exported the files the backgrounds appeared transparent after saving but maybe I've changed a setting by accident that has changed this. I'm selecting the 'Save as' and Flattened png option at 32bit in FW.
View 2 Replies View RelatedI am new to corel draw. i m using corel X6. i m having one arrow image (ie) 12px width and 23px height
I need the arrow in the same size with 24x24px transparent bg.
Changing the UI Font size in Prefs>Interface>Text no longer works. It did work after I installed CS6 - I was able to change to the Medium setting, and change it back to Small. Now the actua text size stays at Small, even though it is set to medium. This afterafter I restart PSx64.
I have deleted CS6x64 prefs. Updated today - (says 13.0.1, though I believe the updater said it would update Photoshop to 13.0.1.1)
Windows Appearance and Personalization>Display is set to the default - Smaller. I wonder it may have to do with changing that size - I had tried setting that to Medium - 125%, but set it back to the default Smaller - 100%. Not sure when the PS UI text size stopped working.
I hope that my mentioning changing the Windows 7 Display from 100% to 125% and then back to 100% will give someone a clue.
resolution on my NEC PA301W is the default 2560 x 1600.
new Windows 7 x64 HP Z220 machine.
32GB RAM
Video Card: AMD FirePro V4900
OpenCL Version:
Driver Version: 8.911.3.1000
I am creating my files in 5x. The final product will be a printed 8.5 x 11 calendar. The company requires 300dpi resolution, and a bleed size of 1/16".
Product 8.5" x 11" Calendar
Final Size 8.5" x 11"
Bleed Size 1/16"
Resolution to Submit 8.627" x 11.127", 2588 x 3338 px, 300dpi
My page is letter size.The image is a bitmap composed of numerous photographs and vector graphics.
I have saved them to a CMYK BITMAP 300DPI.In Corel the image reads as 11.125" x 8.625"
When I export to a pdf or jpg the image size changes to 11.293" x 8.796" which will not work for the printer. It sets the design elements outside the 'safe zone'.
I would like to e-mail about 50 photos to someone. I can reduce the size of the photos in "Export," but even if I compress them into an archive file, the file is too big to send. I tried compressing just 10 photos at a time... the archive file is still too large to e-mail. Is there another way to e-mail large groups of photos from Lightroom? I have Lightroom 3.
View 7 Replies View RelatedI used to have the option to export to full size jpeg. I got a new computer and now I do not have the option. Am I missing a free download or something that came after the original? I have LR version 2.7
View 1 Replies View Relatedi'm currently using LR 4.0 and found a problem with file export.
I have two tiff files:
Tiff 1: 283MB, full resolution ( 2336 x 3504 )
Tiff 2: 233MB, full resolution ( 2336 x 3504 )
Export witht: 574 x 1000 image width
JPG 1: 168kb
JPG 2: 194kb
Both jpegs have 600px x 887px (fram with mogrify plugin#) and 100%jpg quality.
Whe I set a limit to file size of 154kb, I receive following:
JPG 1: 102kb
JPG 2: with error ( couldn't create jpg which fit's the file size limit of 154kb )
If I export the second tiff manually with 90% jpg quality and no filesize, I get:
JPG 1: 114kb
JPG 2: 135kb
So it seems that the "limit file size" isn't really working.Also it seems that Valus between 92 and 100 ends in: same as 100.
I can't see any difference in the import dialog when this preference checked or not checked ... where should I look for the effect of this preference?
View 13 Replies View RelatedI take a large number of event images and the usual client request for images being sent to the press is image size rather than resolution, dimensions or other requirements.
Clearly in LR3 if the client has requested 3MB jpg the easy option is to after processing take my Canon 5d mkii RAW file and just hit export to max 3MB jpg.
My question is is it better - ie image quality better - to export by resizing longest edge to approx 3000 px and exporting to jpg which results in a similar file size, though different pixel dimensions? Or are they effectively the same?
How come the file size when I export from Lightroom is substantially smaller than the original file size? My original image file was 6MB, but when exported from zlightroom the file size for that file is only 2MB. I want to export full size files so that they can be published or enlarged.
View 7 Replies View RelatedI would like to be able to export large numbers of images at a time with the same size, compression, etc. and be able to save these export settings so I can use them again. Does LR have this ability? What is it called?
View 1 Replies View RelatedImage Sizing Dimensions produces wrong image sizes upon export for certain images.
Example, I have export set up for iPad resolution, 2048x1536px at 264ppi. If I now export an 3264x4928px image it should be resized to 1356x2048px. What I get is 1356x2047 instead, one pixel too short on the long side. This doesn't happen for all images source resolutions and ratios though. I haven't figured out the pattern yet.