I updraged to Lightroom 5 and noticed that the interface is a lot bigger than Lightroom 4. I have an Acer Aspire S7 which has one of those HiDPI displays. Is there any way to get the interface the size it was in Lightroom 4.
View 3 RepliesI am finding that my Lightroom 5 prints are bigger than the settings that I input in the Print module.
View 3 Replies View RelatedI want to export images from LR. But when I nominate a size - eg. portrait 5x7", images that are in landscape are resized incorrectly.
View 2 Replies View RelatedI am terribly worried because since I upgraded to Windows 8, Revit 2013 is no displaying the User interface in a correct manner. Many icons/commands are hidden and for example I want to edit a floor, click on it and the Edit boundary doesnt show up unless minimize the panel buttons but it doesnt show up in the expanded panel. Then, once you do it, the red cross and green check mark dont display either. You have to again look on the minimized panel buttons.
Then you finally find where the Edit bounday icon is, click on it, and the option for choosing the boundary lines dont show up and have to expand the panel button.It's been months since Windows 8 is out and Autodesk didn't update Revit to work properly under this new OS?Weird thing is that Revit 2011 seems to not have issues running on Windows 8.
The export works not correct in LR5.3 When the field "Dont enlarge" are activated Lightroom ingnores the settings of image sizing and export the pictures in original size.
View 11 Replies View RelatedHow can the user interface text size be adjusted in photoshop elements 12? I have found plenty of people also asking how to make this adjustment but I have found no way to fix it.
View 2 Replies View RelatedPSE 11 is out and i have downloaded the trial.
Is there the option to change the UI font in PSE 11 - i can not find an option, despite this UI problem being around for at least PSE 10 and PSE 9......
If no UI option in PSE11 - WHY?
I find the default interface in CS6 difficult to read as the menu/tool labels seem very small to me. I can manipulate via Windows, but then the fonts in the windows of all my other apps are too big.
Is there a way to change the size of the fonts in labels in the user interface within Illustrator itself? I thought there used to be a way in preferences some where, but that was a long time ago - maybe even pre-CS?
I am editing and saving pictures from a original size from the camera width 2623 pixel( 8.73in) X 4166 pixel(13.887in). I need to make prints as 5x7in and 4x6in. It seems that no matter how I size them in adobe CS6 they will not print in correct size at either URL.... which I use for prints. I also have pictures from my new camera, canon 7d and it's picture size is 3456 poixel(48in) X 5184 pixel(72in) , also can't get these sized correctly.
View 3 Replies View RelatedI'm trying to print something 2" tall, but it comes out 1.875" tall on paper. I'm using CorelDraw x4, and a Dell 968 printer.
why it won't print the item 2" tall?
ive been making business cards for a friend but i dont know how to create a PDF that is exactley the that size. when i create a PDF the options are thing like A4 etc.. and i dont see a screen to customise the size?
View 7 Replies View Related[URL]
The 8x12 pixel size is 768x1152 and the 8x6 pixel size is 768x576. As to the need of being 11.5 I knew that, but I had this plan to work larger in order to downsize it and not lose any detail of clarity. If I'm understanding some of the other things I read you get a 100 pix per inch, but paint.nets is 96 per inch?
But let me throw a couple more things at you as well. I've made some scrapbook pages in what I had hoped were 10x13's to be printed out for framing...however, when taken to the Walmart printer it cuts off half of one side like the pic is too big..this is even when going for a 11x14 and larger size. I resized them, still cuts them off. Yet I make a 6x4 canvas and try to use it for my desktop background and it's too big for it in the "fill screen" mode, not mention the distortion.
Is there just a simple, cut and dried formula for image, canvas size that will come out the print dimensions I need? I'm sure I'm missing something basic, but my mind only works in basic mode!!
So i created a new project in Illus. CS5 with an artboard size of 700x150 pixels. I have two graphics in there that are about 215 pixels tall so part of it flies off the artboard, but i have a clipping part that hides all the parts that i dont want to see.
The problem is when i go to Save for Web, the ouput image is 700x215 because it includes the space used by the graphics, that fly off the board, but you dont even see it. I was able to get around this by opening the file in photoshop and then cropping to 700x150 so the extra space is removed, but there should be a way to save this in Illus. without the hassel.
I'm using "multiple titles" to add text on my slideshow. The font size is 34 but when i play the video the text is much bigger. The text size is changing depending on the length of the text i'm using... How to keep the text size 34 ? When using "single title" option i can't change the position manualy where to put the title so i think i need too use the "multiple titles" for sure.
View 1 Replies View RelatedI want to may a small flyer for a party. i want to start a new file. what size do i make my file to fit on a 4 x 6 card, or a card the size of a post card?
i have been able to print these sizes but sometime things get cut off the edges. if i knew what size to start with i could fit everything on the flyer.
I have recently created psd files for a wedding album.
The album company will accept psd files or jpegs.
The jpegs need to be at least 30MB. The psd file sizes are around 108MB.
When I save them as jpeg at the highest quality I am not getting anything larger then 10MB.
I am trying to avoid having to upload 32 psd files thru ftp.
I'm a very new user to GIMP but have been using paint shop pro for quite some time - I still use version 7
Here's the situation: I received a pdf that I want to print so I imported it into gimp. It's 8.5x11 at 100dpi & two pages. So I imported it as two images (not layers) at same resolution settings. White out the unnecessary images go to print and then to printer preferences. 300 dpi is the smallest resolution on my printer so I also select 8.5x11 paper & 'sale to fit.' The resulting image is so large that approx only the top-left quarter of the doc prints.
OK, so in GIMP I go to 'Print Size' change the image resolution to 300 pixels: same result, exactly
Print size isn't it, lets try 'Scale Image' at 300 pixels. Same result again...
I tried both settings above with 'scale to fit' (printer) on & off with absolutely no changes to the printed image... very strange. Is gimp overriding my printer settings? If so how do I correct this?
Interestingly, when I re-sized the images in gimp (or thats what I thought I was doing with 'print size' & 'scale image') the size of the view-able image on the desktop in the application window did not change... the size of the window stayed the same, the zoom percentage did not change & most importantly the image did not change.
Finally, I checked if the original image prints correctly in Adobe Reader: No problem and it prints fine. Unfortunately, while I have what I need, I'm not one to give up that easily and want to know if the issue is the printer, gimp.
Why I can't get the image to print in GIMP at the correct size?
Windows XP Home SP3 - I just reformatted the hard drive last week so everything is a new clean install
Hp Officejet 4215 all-in-one
GIMP 2.4.7
I am currently working in a Illustrator file that is 10% of the final print size. This is because the final size is 8,9 x 5,8 meters (15 x 7 times A1). It is therefor all my sizes have to be the EXACT size. Any flaws in sizes will be 10x as big on the final print.
So I am creating 15 x 7 A1 rectangles in my composition of 891 x 588,7 millimeters. 10% of a A1 should be 84,1x59,4mm. However, when I create a rectangle by this very size, Illustrator automatically changes it to 83,961 x 59,267 millimeters. This will result in a 5 pixel blank space on the 15 side, which means 50 pixels on the final size. I, but especially my boss ( -_-' ) would like this to be 0 pixels.
How to fix this auto correction? I think it will have something to do with the millimeters to pixel correction.
I created a 6.25 in wide doc in ID, exported it to PDF. PDF printed doc at 5.5 in wide. I sent PDF file to coworker, who printed it to several other printers in office: same wrong-sized results. Packaged and emailed original ID doc to our local printer, who opened my original ID file and--without making any changes to it--exported to PDF and got a perfect 6.25 size! She had no idea why it didn't convert properly on my software, since it worked perfectly for her.
So, it's my software, and it's a recurring problem: I've created other PDF docs in the last few months that printed incorrectly. That's professionally embarrassing, especially since I make quite a few PDF docs for work.
Working in CS5.I have a vector image that I need to resize and save as a .png. I first create an artboard to the correct size I need (55x20 pixels), shrink my vector image to fit and then export to .png using the artboard as my boundaries (so that I get the correct size).Problem is, the resulting file is not 55x20, it is 229x83 (when I open in Photoshop). I can't figure out why the file is not saving to the correct size.
I have also tried opening the file in photoshop and resizing down, but that doesn't work either. My image becomes very distorted.I don't generally work in pixels or pngs...what would be the best program and process to do this. It doesn't seem like it should be so difficult, but for some reason it is!
I have created a farm map in AutoCAD 2008. I want to have a sign made with this image on it with dimensions 775mm x 1096mm. I saved this image as an eps file of size A4 and sent it to the sign maker. The sign maker got back to me and told me that when he blew this image up it was blurry and could I please save it at its actual size.
My problem is that I'm not sure how to save this image at this size.
I have a designer that created this beautiful (but complicated) design in illustrator and now we're trying to get it exported to html. The thing is, most of the images that are in tds we want to be background images so that we can put stuff on top of it. So we need the exported html to generate the image size correctly. For example, I don't want
<img src="someimage.jpg" width="100" height="100"...
but
<img src="someimage.jpg">
The problem is that illustrator for whatever reason is generating the images slightly too small (I guess to make the image size smaller?), then is stretching them using width and height attributes. As I'm sure you guys are aware of, the background attribute has no way of specifying a width and height.
I have tried font 72 and still the font is tiny.
View 2 Replies View RelatedI was working on a Picture, when I realized that something is missing. Now I figured out whats wrong.I am missing the "Done" button while croping a photo and the compare button ( Y | X ). I don't know how to describe it better but I hope you can see what my problem is. I have no clue how to get the bar back to my user interface
View 2 Replies View RelatedThe new LR4 develop module looks exactly like the LR3 . The quick what's NEW video shows a highlight and shadow slider and the exposure and contrast sliders are in different places.
View 3 Replies View RelatedI understand Lightroom 5 does not change the original image; instead it maintains a delta-like file within its catalog. When, in Lightroom 5, I select 'edit in Photoshop CC' and make changes then return to Lightroom 5 does Lightroom 5 delta those changes in its catalog or is the original image replaced?.
Also, in Lightroom 5, when I go back using 'History' and find a version I like; how do I lock that in. That is how do I ignore/delete the most recent changes I no longer want?
A coworker brought this to my attention and I was also immediately able to reproduce this. We use content center C channels and other common beams a lot. After inserting one into an assembly if you right click and select change size and edit the length it typically doesn't update to the correct length.
Example:
Insert a 10" Ansi MC/C channel any size
right click and select change size
add +.0625 to the existing length and hit apply
measure it at 10.06252 in
repeat change size and type in 10.0625
measure it at 10.0625
repeat change size and type in 10 + .0625
and measure at 10.06252 in
It seems to mess up more when you do math but it also screws up entering a simple number
10.000325 usually ends up as 10.000315 in for me.
Editing the part directly from it's parameter dialog doesn't yield anything like this.
I have CS5 and Lightroom 4 and would like to change the Photoshop interface to dark grey as Lightroom.
View 1 Replies View RelatedFor some reason my 2011 folder resides outside the main Lightroom folder in the application interface.When looked at through Finder though it resides where it should.
When in LR3 I Merge them it says 'A folder named 2011 already exists at this location'.how I can merge all the folders into one location in the LR3 interface?
I have installed and registered LR 5 ok but can't launch. Only a dialogue box asking to select a recently opened catalogue but there isn't one because I haven't had LR before. I just want to open the interface to import some photos but this same dialogue box keeps opening. This was not an upgrade version.
View 1 Replies View Related4.1 download was successful but when i open up the application the develop interface is still lightroom 3. What do i need to do to get the new interface?
View 2 Replies View Related