I am editing photos for a friend on LR5. The catalog is on an external drive. She starts the edit on her computer (a Mac) and then I take the drive to finish (I also use a Mac). The problem is, when I open the catalog, her edited photos come up beautiful at first, but when I click on them, they come up dull and flat. This is not all of her photos, either, just some of them. I have tried to figure out what is going on, why they are like this. I want to be able to sync settings to make this editing easier, but when I sync, all of the photos end up flat and dull. They are Canon raw files and we are using the VSCO film presets.
I have used LR 2 in the past with Windows 98 and an HP Photosmart Pro B9180 shooting with Pentax k10d using DNG files and printing with few or no problems with minimal developing. I am now trying LR 4 with the same printer and camera but with Windows 7 and with little or no changes in developing the prints are very dull and almost black. I have the latest driver updates and am have the printer letting the application manage the color with the correct setting in profile.
Upgraded to LR4. When selecting the 2nd monitor (Gateway) all photo images show as dim dull dark greyed out. If I move LR window from primary (NEC) to the Gateway all menu items and selections normal. All images are dull dim grey including the histogram. Selecting 2nd monitor feature places Loupe on primary display (NEC) works just fine.
If I reset Windows 7 and designate primary monitor as Gateway the problem remains unchanged.
If I place main LR window on Gateway and then select preview of 2nd monitor (CTRL-click) the pop up window renders correctly on the Gateway.
Turned off all icc profiles for monitors no improvement.
Windows 7PRo 64-bit 8GB RAM quad processor all drivers up to date. NVidia card up to date.
Other non LR windows programs and images opened on the second monitor look just fine. The Gateway will render correctly the 2nd monitor pop up preview image; so the monitor will properly display.
If I have some time I will go back to LR3 and double check that everything works fine.
I'm having the issue where after working with RAW images and having exported them to JPEG they come out dull and less saturated.
I'm running Windows 7, LR 5.2. My monitor has been professionally calibrated, and I'm using Irfanview to view the jpegs afterwards. I've also made sure that I'm saving them in sRGB.
I have an issue with the fact that i spend time setting up my camera for the rite white balance and exposure to get a quality image that might use some spot removal in post but thats about it, to have the images become dark, dull and lifeless in lightroom when imported. when i try to bring the color back its just not the same. why is this happening and how can i fix it. i am glad that i saved the files elsewhere first, the raw images look fine in other software its just lightroom that is doing this. here is an screen shot of the same image side by side the one on the left is raw exactly how it looks in camera with canon software and the one on the right is in lightroom. at first it looked the same but 2 seconds later it was dull and imo ugly.
why when I import into Lightroom 3, why my photo's are duller and greyer than when I import them into iPhoto or Aperature or Capture NX? I'm just importing from my SD card in raw format. On my camera (Nikon D60) and on all the other programs the photo looks how I took the picture. Only in Lighroom, upon import it seems to change the color.
I can't find a way to create multi flat patters in one part from a lofted sheetmetal part. Also, didn't the developers fix the 'can't make a flat pattern from a derived part'?
IV 2010 Suite Digital Storm PC: EVGA & Intel components Win 7 Pro 64 bit
I have Lightroom catalogue of approximately 3000 images, all of which are keyworded. Up until recently, it was possible to have a hierarchy of keywords and now I want to contstruct one from the flat list.
photoshop CS3. It may be something to do with colour spaces which I dont really understand but all the clours are dull, , in windows explorer they look vibrant but when opened in photoshop even with profile adobe rgb1998 they are really dull. Even in the colour palette they are dull like they have been desaturated.
I'm designing in Illustrator, RGB mode and using RGB colours. However, when I export to png, the colours in the png file are bright and vivid (the correct rgb colours I assume) but in illustrator they are dull. It's making it very hard for me as I actually want the duller colours, not the really bright ones. Attached is a screen shot to show the difference. Left is png, right is ai.
In my job as a cartographer I regualrly get asked to create advertisements for mining magazines. The ads usually contain both text and images. The colours I use in Coreldraw are PMS colours and the images are CMYK colours.
The problem I have is when I publish my ad to PDF the PMS colours always come out fine (which I would expect) but the image colours always look dull and washed out. The only time the images look fine when I publish to PDF is when I use output to RGB hut the printers then reject my ad (naturally). Is there something I need to do to the image in Photopaint?
After I've edited a image in Lightroom and then import or view in a web browser all the colors appear dull. However, these images appear normal when opened in Photoshop or in Windows Photo Viewer. If I do ALL the editing in Photoshop alone, these images appear fine when viewed in a browser. So, I'm assuming that the problem lies in Lightroom.
I'm making a bright montage for a friend and when I save it as a jpg, the colors turn dull. Can you tell me why? Is there a way to keep the bright colors as a jpg?
I'm new to gimp and used to photoshop. I cannot remember having this trouble with photoshop, but I was also working on a PC... so is it a gimp issue or a mac thing?
I created an RGB file in Illustrator CS5. I saved an .eps, also RBG, and the colors are much duller. I've tweaked the color settings and tried using Pantone colors to no avail. Not sure what else to do?
So, I take a photograph (Nikon D70s raw format), get the colour balance right and sort out the curves. The picture looks great! Bright, crisp with zingy colours. So what happens when I Save For Web, flat, dull with muted tones. What am I doing wrong? The picture is in RGB 8 bit.
I copied photo folders from my hard drive to lightroom 4 and edited them but then accidentally removed these folders from lightroom. I then imported these folders again into lightroom but all the edits I made orginally in lightroom don't show up for the individual photo's.
I backed up the Lightroom catalogue regularily. Is there any way I can reattach these edits to their respective photos'. There is lot of photo's involved.
the record I am using Photoshop 7 (yes it's old, but it suits my needs just fine!) and Windows Vista Home Premium.What I do is take photographs of my artworks, edit them in Photoshop until they look accurate, then post them online. Images have always looked identical in every program, and I had never had any problems, until I got connected to the Internet on Tuesday. This computer has not been connected to the net for a good few years, and so lots of updates got installed. I'm not sure which ones exactly, as my boyfriend took care of that, but I'm convinced this has caused the problems I am having now:
First I found that an image I had edited and saved as .jpg for web use was showing up overly saturated and contrasty in the Windows Photo Gallery preview. I assumed I had saved it wrongly. I re-opened the jpg in Photoshop to check - it looked exactly as I had saved it. I figured something had messed up with Photo Gallery during updates, so I uploaded the jpg to the Internet. The image that uploaded was the overly-saturated, contrasty one.
After realising that suddenly ALL the images I had uploaded online, and all the images saved on my computer, now had this awful over-saturated look, and yet the thumbnails on my desktop looked fine... I realised it must be something to do with the colour profiles, and tried to find out the answer online. My monitor colour profile was set to "21.5 inch monitor" so I changed that to sRGB as default. I can't remember what Photoshop was set to, but at any rate I set it to sRGB also.
I thought I had it fixed, as it seemed to just be Photo Gallery that was not matching up (it was displaying my images with less saturation than as I saved them).However today I took a new photo of a drawing I'm working on, to load onto my blog. I had to take it into Photoshop to make edits and correct, as always. I opened my photo in Photoshop... lo and behold, far too contrasty and saturated!!
This time, Windows Photo Gallery preview is showing the (unedited, straight out of camera) photo as it should be... Photoshop opens it too contrasty.I made my edits anyway, saved for web as .jpg, checked the jpg in Photo Gallery before uploading... It saved duller than it should have done! Uploaded the jpg to the internet... and I have the dull image uploaded.
So first they were too contrasty, now they're too dull. Being an artist who displays work online and has a certain reliance on the internet... my images have to be accurate and consistent all the way through. Is there anything I can do to set things back to the way they were before?
When I have a drawing open in AutoCAD LT 2012 any xrefs are very dull or perhaps dark is a better description and on a black background tend to be very difficult to see. Is there a setting somewhere I can change to brighten up the xref?
I just installed CS3 in Windows Vista Ultimate x64 on my PC and I have my working color space set as sRGB. The color is dull when opening documents in any Adobe application with the working color space set to sRGB. The color is fixed if I change the working profile to my monitor profile which is "Monitor RGB - Dell 2407WFP-HC"
When in the "Monitor RGB - Dell 2407WFP-HC" profile whenever I open an existing file Photoshop alerts me that the embedded color profile is different than my working profile (all of my existing files are managed as sRGB and on my previous computer the sRGB profile looked perfect.)
Photoshop I could theoretically live with but the same problem occurs in Acrobat and changing the "Working Profile" in Acrobat has no change on how the sRGB managed PDF is being displayed. The same PDF will look fine on another computer.
How do I get sRGB color to display correctly in Adobe applications and not look dull and muted?
Additional Information: The problem is still prevalent when accessing the computer with Remote Desktop which leads me to believe it has nothing to do with my monitor or the video card I am using.
All the assemblies that I created in 2012 are showing with lighter color steel that I don't like. Is there any way other that selecting each member to change the display color to a darker steel color? I want to change the display quality to show the member edges as straight lines and not dull zig zag looking edges. How would I do that?
I am trying to export geometry found in a flat pattern sketch overlaid onto the flat pattern.
Since I am creating the output file manually I gather the flat pattern boundaries and bend center lines for output to a file.
When I add flat pattern sketch entities to the mix they do not overlay properly. What matrix would I have to push the sketch entities through to get them to the same coordinates as the flat pattern?
I add five photos to a folder in Lightroom 4.3. The photos are in the specified folder in Windows. Import shows the five photos as imported but greyed out and semi-highlighted. Library does not show these five photos. What can I do?
I decided to open up my Adobe photoshop CS2 for the first time, to do some photoshopping (also to see what adobe would look like on my new monitor) ...and when I opened the my adobe, a error message popped up saying something like "your monitor 'LG monitor L206WTQ' is defected ... ..." - Now because I wasnt too sure what the message mean't, I just closed the message window and continued to work on adobe - which actually seemed to be running fine - only untill i relized that I could not get the true color WHITE on my color palete!
