Lightroom :: 5.2 - Can't Preview Or Import From NAS
Dec 1, 2013
I just bought Lightroom 5.2 but I'm not able to preview or import any files from my Synology NAS (4.3 software version) where I keep all my photos.
I see the filestructure and the files but I don't see a preview version of the file and when I import I get "The files appear to be unsupported or damaged".
When I look at files to import on the local harddrive, I see previews of the files so it seems to work there.
I have no problem displaying the NAS photos using OS X Finder. I assume there is some general setting that is wrong because out of 15000 photos I could not import any, only imported 5 short iPhone movies that accidently happened to be stored in the photo file structure.
View 1 Replies
ADVERTISEMENT
Feb 14, 2012
During the import of RAW files of my Nikon D5100 no previews are shown, a thumpnail with the text "Preview not available" shows instead. Importing the RAW files is not a problem, once they are imported, the prevews are shown in the Library. I would like to make a first selection during import but without the previews this is not possible. I am working with Lightroom 3.6
View 4 Replies
View Related
Mar 29, 2012
I get 'preview unavailable for this file' when attempting to import files from my Panasonic Lumix DMC LX3 - even though the same images show up fine on import preview for Lightroom 3?
I have Lightroom 3 AND 4 on my machine at the minute, running OSX Lion on Mac, and if I have the same card in the same card reader - I see soem unimported file previews with 3, but not with 4! What the hell - older version seems to work better than the new one!!
View 4 Replies
View Related
Sep 14, 2012
So I want to import some pics and this statement comes up, " Preview unavailable for this file" see attached. I imported the pics once and then realized that I did not batch name them like I always do. So I deleted them from LR then renamed them in Bridge, then tried to important them again, it is a no go. So I have LR 4.1, I use Mac book pro, Mac os x version 10.7.4. I am pulling these pics off of my external Hard drive, I have never run into this problem before when I was using LR3.
View 4 Replies
View Related
Jul 25, 2013
I noted after importing my images from my disk f(to Lr5) that some floral images were missing.Luckily they were on my backup disk so i moved these floral images from my backup disk to the proper floral folder in my int. disk f. Now how do i import these new images that are located in their particular floral folder which are indeed there.Also how do you set up these new files to do a preview setup. did try to import these new images,but lightroom would not let me do it because it grayed out the images telling me that we noted some duplicate images here. Yes, i did see a few dups of these images in the floral file. If i deleted these dups under its proper folder in disk f shouldn't lr5 let me continue the import?
View 1 Replies
View Related
Aug 9, 2013
how do I change the preview setting after import?
View 1 Replies
View Related
Oct 15, 2007
When importing directly from camera into Light room, after ticking 'Preview' only a blank grey image with file number is displayed and no image
View 2 Replies
View Related
Feb 17, 2014
Preview works, but no Import from any SD or CF and even HD! Try internal and external card readers and create a new catalogue, no results. All files from cards or transfered to HD will open properly in PS!
LR 5.3; CR 8.3; PS 14.2
View 7 Replies
View Related
Aug 2, 2012
for some reason I get the message 'preview unavailable for this file' for about 50% of the photos in the import module of LR4.1. This only seems to be an issue upon import since the files still import as usual and I do not encounter any further issues after the import with developing etc. It's not a huge problem for me but still quite anoying as I am not able to review my photos before actually importing them.
Here are some further details:I am shooting with a Nikon D300s, all photos are in NEF-format, I use USB-mini USB connection between computer and camera. The problem occurs on both my Macbook Pro Retina 2012 and my iMac Mid-2010. The problem only occurs with LR4, I didn't have any problems with LR3.
View 3 Replies
View Related
Feb 12, 2013
Suddenly, I am getting the above message, when trying to import RAW files in LR 4.3. I tried with two different cards and two different Readers.
When I click on Import, I get a blank thumbnail of all the photos with the message in it. I was able to see the photos in Finder on the Compact Flash card with no problem.
I have LR and camera up to date for a while, so nothing different has been done that I know of.
View 5 Replies
View Related
Jan 4, 2014
I'm using LIghtroom 5.3, and raw camera 8.3, the latest update available. I found from Adobe's site that this version supports D7100 raw image imports. But when trying to import D7100 raw images, I get a message that "the file is not recognized by the raw format support in LIghtroom."
View 6 Replies
View Related
Oct 10, 2012
Why can't I preview or import images from my canon 5d mark III in lightroom 3?
View 3 Replies
View Related
Mar 20, 2013
Lr 4.3 ACR 7.3 - unable to view preview files in the import window and/or raw files in the Library?
When will this camera be supported?
View 5 Replies
View Related
Feb 4, 2012
When importing images to the catalog, both the preview and import image is highly contrasted and saturated.When I use edit in the photo opens as the original image without updates. My import preswet options show none.I am using Windows7 32 bit.
View 6 Replies
View Related
Mar 4, 2014
I am an amateur photographer. I just purchased a brand new NIKON D3300 took a few pictures, signed up for the Adobe annual Photographers Creative Cloud annual program and my first task to have Lightroom import a few test photos fails and I have no clue why my raw + jpgs can't be imported. at the outset In Lightroom I also got a "Preview unavailable for this file" message for every image file when I pointed to the memory card I had connected to my computer:
The files are not recognized by the raw format support in Lightroom. (35)
DSC_0376.NEF
DSC_0377.NEF
DSC_0378.NEF
DSC_0379.NEF
DSC_0380.NEF
DSC_0381.NEF
DSC_0382.NEF
DSC_0383.NEF
DSC_0384.NEF
DSC_0385.NEF
DSC_0386.NEF
DSC_0387.NEF
I've also attached a screen shot. I would really like to use Lightroom and all the Adobe products but I have no clue why it won't work with my NIKON test pictures.
View 2 Replies
View Related
Apr 5, 2013
I cannot import files from an epson scanner V750 pro. The screen reads unable to read preview. I am scanning B/W negatives using 16 bit Grayscale and tiff image format?
View 2 Replies
View Related
Mar 4, 2013
Lightroom 4.3 import screen does not seem to be able to enlarge for better viewing the preview thumbnail from a Canon G15 raw CR2 file?
View 1 Replies
View Related
Mar 25, 2011
Lightroom will not display preview images during import of raw images. Any images in other formats display fine but with raw images I get a gray window the size of the preview image and the words "preview unavailable for this file".
Running Windows XP 64, Lightroom 3.3.
View 3 Replies
View Related
Jun 2, 2013
I recently bought a Nikon D7100. I took some test shots and imported the images to Lightroom 4.4, then generated 1:1 previews for all the images.
Previews zoomed to 1:1 in Library Mode are noticeably soft. The image below is a screen shot of the Library preview:
Moving to Develop View produces a higher-resolution 1:1 preview. The image below is a screen shot of the Develop preview:
Look at the bricks and window screens to see the difference.
This difference occurs immediately after import (with a User Preset applied during import). Once any Develop work is done, the Library preview updates and displays at full resolution.
This problem makes doing initial editing/selection of images time consuming, because I can't determine the sharpness/quality of imported images until I've done some kind of Develop adjustment on each image.
View 3 Replies
View Related
Mar 29, 2014
I am using MacBook (late 2008) OS X 10.9.2 and recently upgraded to Lightroom 5.3 from Lightroom 4. After a while, some photo started to show exclamation mark at the right hand corner of the photo (*.CR2 raw files in NAS) in grid view. When I click on the exclamation mark, it shows a dialog with following message; "Lightroom has encountered problems reading this photo". So, I moved previews.lrdata, which is about 9GB, to the trash and restarted the Lightroom 5, expecting Lightroom 5 to create a new previews.lrdata. However, it won't create any preview at all.
exclamation mark at the top right hand corner of the photos in grid view.
size of Previews.lrdata file stops at 152KB.
View 3 Replies
View Related
Oct 7, 2013
Just downloaded LR 5 and noticed that I cannot jump back from a Publish Service folder preview to a different folder preview in grid mode. The only way to view photos in another folder is to restart LR 5. This only happens when I am viewing photos in a Publish Service such as Flickr.
I updated from LR 4 using Creative Cloud installer.
View 4 Replies
View Related
Oct 2, 2013
When I first install Inventor, everything works fine, I can preview the DWG when I import it, choose layers and so on. Then with time, this preview doesn't work and I don't know why nor how to fix this.
I had the problem with 2012, 2013 and now 2014. I installed Inventor from the factory design suite advanced (ultimate) and it worked at the beginning. Now I installed SP1 for Inventor and it doesn't work anymore (I'm not a 100% sure that it's related but it's the latest modification I did).
Now I'm trying to fix this. I uninstalled DWG TrueView 2014 and reinstalled it from the downloaded version (autodesk site). It doesn't work.
I uninstalled vault pro 2014 SP1, then trueview, the design review, reboot, install back vault pro client 2014 then its SP1... still not better, the import window preview is still empty and not showing layers.
As I said it's not the 1st time and it happened on previous versions as well. Is there a solution without uninstalling Inventor ? Anyway I'm afraid that If I uninstall Inventor to install it back, I will encounter the same problem as soon as I will install SP1.
DWG TrueView by itself works fine, I can open my drawings (even Inventor DWG), Autocad Mechanical works fine, everything looks OK but this import thing.
To be complete, here what I have installed from autodesk (and i installed it successively) :
Inventor Pro / MDT / DWG Trueview / AOEM View 2009
Inventor Pro / DWG Trueview 2012
Inventor Pro / ACAD Mecha / Navisworks Manage / DWG Trueview / vault pro client 2013 (FDS)
FDS Ultimate / Vault Pro (server and client) 2014
I just tried in 2009 and 2013 and the import works. Now in Inventor 2014 it tells me that the DWG was created by a more recent version of DWG Trueview and that I can't import it.
In the registry editor, the Inventor current version is still 2009 (it should be 2014). I'll reboot my computer and see if it's better.
View 4 Replies
View Related
Nov 1, 2013
The usual import menue has the options for importing on the right hand side. My system is now showing an import dialouge box and the import dialouge on the right is greyed out. How do I get back to the standard import screen.
View 2 Replies
View Related
Nov 4, 2012
This issue occured shortly after update to 4.2, but not directly after. I am using windows 8.
The issue that occurs is after importing images they are adjusted automatically to develop module cross process 1. After dealing with this annoyance for a bit of time I realized that I can not even "RESET ALL" the images to delete the adjustment. In delving into other images that have been in my database for quite some time, I have tried to "RESET ALL", which resets images to CROSS PROCESS 1. I have never set import to automatically adjust.
View 5 Replies
View Related
Mar 13, 2012
I just upgraded from LR3.6 to 4.0. When trying to import images the import module freezes for a few minutes and then displays the import screen. However, when selecting a source the program freezes again and eventually crashes.
I had the same issue when upgrading to 3.6 some time ago and then found that disabling some USB controllers solved the problem. This works for LR4 as well. As I don't need all USB connections this is a workable solution, however, disabling controllers should not be necessary to run a program.
System is an Acer Aspire 7811 64 bits w/ Intel i7, Win 7 Home Premium, 8 GB internal mem and no external drives.
View 8 Replies
View Related
May 19, 2012
I'm using LR4 with a Canon camera setup (Wind 7 Ultimate). I've got the auto import setting all configured with an incoming folder and destination. The app recognizes when an image is put in incoming folder and in fact it moves it to the destination folder. What is really annoying is that it leaves me at the import settings dialog and then I have to make all these choices as I would if I were manually importing.
Shouldn't the images be places in the desination folder and some view of that image be displayed in LR? It could be the folder view or ideally I want to see the last image imported at 1:1 size so I can review it and see if I want to take another shot? Maybe there is some flag I've got set incorrectly.
View 1 Replies
View Related
Dec 21, 2011
I use Auto Import to import my RAW files. Each time LR imports my files the Previous Import count number increases. Is there a way to reset this count so it shows a true reflection of the photos from my previous import session?
Correct me if I'm wrong but if you manually import files the Previous Import count number resets itself automatically. I've Googled this problem & this question has been asked before - all users were utilising Auto Import.
View 1 Replies
View Related
Jan 17, 2011
I'm trying to import photos into LR3.3, and the thumbnails are grayed out, as is the import button. The photos come from two other cameras -- one Canon Elf, the other I'm not sure. I received them through dropbox, and they open fine with Bridge and Photoshop CS4.
View 4 Replies
View Related
Jan 26, 2012
I'm running Lightroom 3.6 on Windows XP. My laptop crashed and I had to re-install Lightroom. When I try to import my photos, I'm receiving "Preview is not available for this file".
Lightroom was working perfectly before the crash and I don't quite understand what happened during the install process.
View 2 Replies
View Related
Jun 24, 2013
the psd file from photoshop cc is not giving a previeuw in lightroom 5
View 7 Replies
View Related
Nov 1, 2012
My finder can't show the preview of my DNG files ( I use the mountain lion and lightroom 4.
View 5 Replies
View Related
