Lightroom :: 4.3 Error Exporting Image To Xrite ColorChecker Passport Software To Create Profile
Dec 21, 2012
Camera profiles created prior to the update to 4.3 still work, but when exporting an image to the software now, a command window pops up VERY briefly "OMG Error #15: Initializing libiomp5md.dll, but found libguide40.lib already initialized." I found both files in c:windowssystem32, but when I looked into a backup copy of my drive from prior to the 4.3 update, neither file is present, leading me to believe they were installed by the update. I tested the LR 4.1 version and the unchanged xrite software performs as it should with LR.
View 2 Replies
ADVERTISEMENT
Jan 26, 2013
I have created custom profiles using Color Checker Passport for sunny, cloudy, flash, tungsten etc but would really like to create one for most shoots. I thought it would be a good idea to name it say "Temp" and overwrite each time so that I dont end up knee deep in camera profiles. But I am guessing if I do this will the latest saved version of "Temp" change the camera profile of all other previously saved versions of "Temp" from other shoots?It would be good if the saved version of "Temp" resided within the folder of that particular shoot only.
View 27 Replies
View Related
Oct 30, 2011
I want to create a image file with six passport photos on a 4x6 photo print page. To do that I was asked to do the following:
take a photo yourself, crop it down to a 2x2 square, then copy and paste this into a 2 by 3 tile pattern (4x6 in. canvas size). You now have them print out a 4x6 photo
I don't know how to "tile pattern"
How can I do this in Paint.net
Attached Thumbnails
View 5 Replies
View Related
Sep 28, 2013
I just bought me a new canon EOS 700D, the x-rite Colorchecker Passport and photoshop elements 11. I took a photo of the colorchecker (.CR2-raw file) and followed their instructions to make my own camera profile. Meaning I opened the .CR2-Raw file with Photoshop elements, didn't make any changes to it just directly saved it as a .DNG file. Opened it in the colorchecker software "Color Checker Passport", it recognized the colorchecker on the photo and so I pressed the button to make the profile and to save it. I then restarted Photoshop elements and opened the photo with the colorchecker on it again as a .CR2 raw file. In the instructions it now says change the camera profile to your just made profile, but when I scrolled down the profiles there were only the standard profiles "Adobe Standard, Camera faithfull, camera landscape" and so on. Mine was not there. So I checked the paths were my profile and the standard profiles are saved to. I then put my new profile into the same folder as the standard profiles for my camera, restarted PSE 11 (and the computer after a couple of tries) and tried again. Again my profile was not in the scroll down menu where it should be. I even reinstalled all the software concerned with this but it didn't work. My system is Windows 7 64 bit and photoshop elements 11 and X-Rite software are updated.
the .dcp camera profiles I make with the colorchecker software are only 2 kb big but the standard profiles are more like 200 kb.Additiv after reinstalling everything and updating again, the camera profile folder for my canon eos 700D is missing. The folder for teh newest model of that line is the 650D.
View 3 Replies
View Related
Feb 2, 2014
I have installed X-Rite's Colochecker Passport for a long time, and a im using it to create camera-profiles in every shoot.
But now the profiles don't show up any more in LR 5.3.
I have checkes the desitnation-folder. And in windows explorer i can see every profile. I have downloaded the x-rite dng profile-manager, and it also shows up all profiles.
View 21 Replies
View Related
Jul 10, 2012
I want to export some files for printing by a service bureau using a custom profile which is 1.87 MB and do no not want to embed the profile. The images will then be sent directly to the printer without any adjustments and the profile is not needed. This is an option in Photoshop, but I have not found a way to do this in Lightroom.
View 10 Replies
View Related
Jan 4, 2013
I use a Passport external drive with LR, when i explore this drive I have over 8,000 photos when i open in LR only 5,000 photos show up.
View 4 Replies
View Related
Sep 13, 2011
Every time I try to change my profile image, I get an error message saying.
"The file you uploaded is too large.
This section will allow you to specify a photo to be used in your profile which is viewable by other board members. Photos must be no bigger than 150 pixels by 150 pixels."
The problem is the image is already smaller than 150x150px I've checked multiple times.
View 8 Replies
View Related
Dec 16, 2011
All of a sudden I am getting an error when I try and export my photos to a dvd from lightroom3. Ive never had this issue before and Im not sure what to do to fix it. how I can burn my images to a disc?
View 3 Replies
View Related
Nov 10, 2013
I can't seem to export photos as I get the following error message when trying:
invalid parameter name: colour nosie reduction smoothness
View 4 Replies
View Related
Jul 17, 2013
When I attempt to export a group of approximately 50 photos from LR4, a window opens at the end of the process saying "The file could not be written" along with a list of approximately 10-15 NEF file names. I have never had a problem exporting before, but I recently started storing my LR catalog and files on an external USB 3.0 drive.
Here are the details:LR4 with latest updatesWin 7 with latest updatesLR catalog and photo files stored on external USB 3.0 G: driveTrying to export to a folder on my desktop on C: drive (46GB free out of 134GB, solid state drive)LR files are NEF, exported files are JPGI've tried to export to the same group of photos multiple times with different names and different output file sizes (8MB, 5MB, 2MB). Each time the list of failures is different.Some of the thumbnails which appear in Windows Explorer are corrupted (part of the thumbnail is gray)When I try to export the same group of photos to the external USB 3.0, it works perfectly!
Here is an example of one of the LR log files:
The file could not be written. (17)
G:2013Stratton and Colorado20132013-06-23\_D7K1915.NEF
G:2013Stratton and Colorado20132013-06-23\_D7K1918.NEF
G:2013Stratton and Colorado20132013-06-23\_D7K1919.NEF
G:2013Stratton and Colorado20132013-06-23\_D7K1939.NEF
G:2013Stratton and Colorado20132013-06-23\_D7K1948.NEF
[code].....
View 1 Replies
View Related
Dec 26, 2013
When I try to export an image I get the error "An error occurred when writing the property "Revision number" to the file". The file still exports but I would like to get rid of this error.
View 5 Replies
View Related
Mar 9, 2013
My Lightroom has unexpectedly stopped exporting files. Nothing that I am aware of has changed--I haven't changed cameras or added new software. No error message comes up, it just does nothing after the Export dialog box.
View 2 Replies
View Related
Mar 7, 2012
I've never had problems doing this with Lightroom 3, just upgraded to Lightroom 4 and I can't seem to export anything. I also can't publish either.
View 9 Replies
View Related
May 28, 2013
Since some days, when exporting pictures, an internal error warning occurs opun the screen and says: Win 32 API error2 (System cannot find the Data) when calling ShellExecuteExW from AgWorkspace.shellExecute
But - the export works...
How can i stop LR4 displaying this warning?
View 1 Replies
View Related
Oct 19, 2012
I've recently encounterd a problem while trying to export images out of Lightroom 4. I keep getting an error messge "File canot be written." This is happening whether I'm exporting a Jpeg or a raw file. Cannot figure what has happend but it's doing it with old and new files, so it's not an issue of a corrupted file.
View 1 Replies
View Related
Feb 16, 2013
I have a 5d mark 2, and I created a custom camera profile that is ideal for me, however when I shoot raw it only gives me the adobe, and camera standards etc. Is there a way that I can take my user setting on my 5d and transfer it into lightroom?
View 1 Replies
View Related
Nov 29, 2012
I thought I had this figured out but it appears to occur somewhat randomly. Since upgrading to Windows 8 when I export files that I have imported from Canon raw .CR2 for some files it gives an error that "the file could not be written" and lists the original source .CR2 file name. It does not do it everytime but once it happens it happens everytime for that file. When exporting 10 JPG files for example only 3 of them may have this issue. The file still exports and creates the JPG file and the only issue with the exported file appears to be that it did not create the preview thumbnail.
I have tried importing the files into new catalogs, writing to different folders etc but it still happens.
View 2 Replies
View Related
Apr 4, 2014
When exporting from lightroom this message came up: Could not create a JPEG that met your limit of 500K bytes. (1) I have tried making the size smaller, but nothing seems to work. I have never seen this message before.
View 5 Replies
View Related
Mar 8, 2012
When I export my images from LR4 to CS5 using the Edit In... choice, I first get the ...may require the...Camera Raw plug-in version 7.0... which we all know doesn't exist. Not that that isn't annoying enough (I know - I can turn off the warning) but the image then presented in PS5 is not of the same quality as the one I am exporting from LR4. It's almost as if the Lightroom adjustments are not carried through. I have tried all three color space options to no avail. Also, I am not being presented with the dialog asking if I want to edit a copy with Lightroom adjustments. These are Nikon RAW files (.nef) that I am working with. Other images that are not RAW files do display the Edit Photo with Adobe Photoshop CS5.1 dialog.
View 2 Replies
View Related
Nov 24, 2011
I like to keep track of what I've exported and uploaded to Flickr and other sites and what I've sent out to people. It seems tagging my images with some appropriate keyword is the best way to do this. Such keywords as "Flickr" or "Facebook", etc. But I the only way I can do this is to remember to manually apply each such keyword when I do the export. It would seem to me to be wonderfully simply if I could, in the export form, do something like "Add keywords:" and list keywords that would be added to each image exported through that form.
Is there another way to track such usage other than with keywords?
View 3 Replies
View Related
Mar 12, 2014
When I edit my photos in Lightroom (4.4 at the moment) they look great. I am looking for extreme sharpness and clarity and I am able to achieve that. Though, once its exported the image quality is reduced. Why? how to set my export settings to the max.
[URL]
View 6 Replies
View Related
Mar 28, 2014
When I export an image with dimesions of 4214x3371, the image size will show as 1.124x1.405''. This is a problem because I am trying to print my images on a 16x20'' canvas. My resolution is set at 3000ppi and I am exporting RAW files to an uncompressed TIFF file with my color space being ProPhoto RGB.
View 3 Replies
View Related
Apr 15, 2009
I'm running Vista Ultimate 64 bit Photoshop CS4 Extended and have come across a problem with the Automate/Fit Image script. I have read the other posts here concerning a bug in the script, but I'm not even getting to the stage of the script giving me any options to run - I just get the following in a Script Alert message box: Fit Image CS4: Error: Unable to create Window - OS error [1400]:210 I can see that the script is in the Presets/Scripts directory OK.
View 3 Replies
View Related
Oct 9, 2011
I want to create a profile/wall style or what ever you want to call it for a raised deck flooring for external decking. I am looking at the decking material only. Not concerned about the timber framing sub floor material.
View 1 Replies
View Related
Jan 17, 2012
I am working C3D 2012. I have a proposed alignment and profile design by another firm that I had to tranfer into C3D. I had no problem getting the horizontal alignment to display from a text file. I tried to do the same with the profile by using the 'create a text file and create the profile from file' command. I got the POB, PI's, and POE to display. I then defined the VC. I wanted to verifiy that the profile was indeed accurate compared to what we were provided. So I tried to execute a profile report PVI Station and Curve Report - I keep getting an error that "No FG profiles in dwg".
I know the Proposed profile is indeed set to proposed in the properties. I have noticed that the icon next to the profile I create from the text file is different than the profiles created from scratch.
Is there a way to convert this profile to be recognized as a FG profile?
Intel Core i5-2500K CPU @ 3.30 GHz
8.00 GB
64-bit
View 9 Replies
View Related
Jun 2, 2013
How do you control the image export sequence when exporting to DVD via LR4?
View 7 Replies
View Related
Jun 28, 2012
The intersection wizard makes dynamic EOP profiles based off of the cross slope from the centerline. Well the intersection tool doesn't always work with funky intersection layouts. Is it possible to manually create a dynamic EOP profile based on the cross slope from the centerline profile?
Civil 3D 2012
Windows 7, 64 bit
View 1 Replies
View Related
Mar 17, 2011
We have an engineer who is taking an existing surface and wants to show a proposed road 2" higher than existing.
I told him to simply adjust his assembly for his corridor to account for the 2" difference, but the County agency needs to see a profile.
My questions:
1) Is there a way to easily copy a profile made from a surface and "convert" it to a proposed profile? If we copy and explode, it turns into hundreds (thousands?) of tiny pline segments and it would be a mess to convert all those to a profile 1 by 1. If we make the corridor, and choose "profile from corridor", we do not have an option that could be used to represent the centerline.
2) Other than loss of dynamic updating), would it make sense to adjust the assembly so the top surface would be accurate, then copy the profile, explode the copy to a block and simply shift that (as essentially basic linework)?
View 9 Replies
View Related
Nov 17, 2013
Is there a way to have an image automatically go in to a smart collection when exporting to a specific folder? I have a folder on my desktop that I export every image I want to upload to flickr. I'd like very much for these to also be added to a smart collection.
View 15 Replies
View Related
Oct 19, 2013
I just noticed yesterday that when I have RAW (DNG) files in my LR5.2 library, I can select the correct lens profile to apply. When I take three of those files and merge them together in Photomatix Pro they come back as a single TIFF file. Now LR only has one lens profile available, and it is the wrong one.
This is happening with my Sony NEX-7 and Tamron 18-200mm f/3.5-6.3 XR DI-III VC. With the RAW files, I have a list of Tamron lenses from which to choose, and the correct one is available. For the merged TIFF file, however, only a single Tamron lens is available for selection, and it is not the lens I used.
View 4 Replies
View Related
