I am aware of 'round corners', but I can't find the command or tools to round individual corners. I searched the manual but can't find anything. Perhaps it's so obvious I'm looking right past it.
View 26 RepliesI have a banner heading that is more or less outlined text. I want to give all the corners a rounded corner and at the moment would just do it all by hand, one at a time. So I want to go from a to b:
But I would like to find an easy way to make all corners the same diameter regardless of the angle too.
I saw a vid a little while ago that showed me how to easily round one corner of a rectangle and I can't remember how to do it.
View 33 Replies View RelatedA friend asked me to create a logo similar to The North Face by using a song name. The upper right corner needs to be rounded allowing the color fill between the two silver parts. It looks somewhat ok, but as you can see it is not very proportional. I tried the aics_scripts file that I found from searching, but i can't get it right, most likely because the curve in the logo is not perfect. I have linked jpegs of 2 possibilities - the third image is made from creating a border in the appearance but then i cant get an additional outline around it with the silver color
View 11 Replies View RelatedAll the default arrowheads are sharp corners. I need to make an arrowhead that looks sort of like Arial Rounded, where the arrowhead itself is rounded at the point and on the ends.
View 9 Replies View Relatedi have cs5 suite. last week everything fine in photoshop. this week, only the tools that are showing are available to use. i can not access the tools when i click on the corner of individual tools. i am running version 10.6.8
View 1 Replies View RelatedI know just enough to get by in Photoshop but have had zero training, so I tend to jimmy rig everything until it looks okay. I am stumped on this one though.
I bought a web template and am modifying the images to what I need them to be. I can not for the life of me figure out how they did this rounded corner and shadowing on the corner. I can easily, manually copy the two lines going up the sides of the image. (Jimmy rig) ... but I can't seem to get the corner to look right.
I know it looks like a drop shadow, but you'd need to know all the colors and exact settings to copy that drop shadow and all i have is the finished product.
Round Corner Borders?
After a round corner digital photo is created is there a way to outline the curved corners selection with a border?
(I have seen it done in Photoshop) I just upgraded to X3 hoping to be abe to accomplish this.
I have couple of problems that I haven't managed yet on my own.
1. How I can get "smooth" bends without those "steps"? See part: Smooth Bend
2. How I can round that Flange's "inside" corner? Just smooth Corner Round like those other corners have. See part: Corner Round
I draw square. The 1st point and last points are left-top and finally set 5 points.The direction is clock-wise and made closed path.To get smooth-curved polygon shape, I used API 'PointsToCurves'.But, the first and last points are connected by cornered (not smooth) point. Here's result.
Maybe, I must set that square is closed path, to API, but it seems to be no parameter to set.So, I want to know how to get smooth corner shape every corner.I use SDK CS5.
I use the Rectanle Tool a lot and Photoshop CS6 is the first PS version i see displaying some tool tips in the corner every time i draw with it.
Like this: [URL] .....
This is very annoying since it overlaps pieces of my black&white images distracting me. Is there any way to disable it?
Need to do a round upper left corner to join the horizontal flag with the vertical flag.
[URL]
There seems to be way too many tools in the tools panel for me. Many of them I will rarely, if ever use. Is there any way I can rearrange or remove some of them? It would unclutter the screen immensely.
View 8 Replies View RelatedI have an interactive board with tools (such as pen or eraser) which I want to integrate with the AI. The typical scenario woulld be as follows: the user lifts the pen from the tray, the pen event will me mapped into selecting Pencil Tool from AI toolbar after which the user can add freehand annotations to the AI document.
Is there an API which would allow me to map abailable hardware tools with relevant AI tools? Is there an example which would demonstrate such integration?
I've had to reinstall CS5 after a new Windows installation. Never had a problem with it before, but now I have the issue where if I click on a tool that has sub-tools, it now expands to show them. Before, to access them, I had to click and hold for them to appear. Now with them expanding on the first click, it's interrupting my work flow.
Additional issues have arisen while I'm here, such as, when doing web work, I'll change the rectangular marquee to single pixel horizontal (e.g.), make the selection, do what I want with it, then press M to adjust another single pixel line, but it'll return to the full rectangular marquee, like it resets.
I'm running a test at the moment with Open GL disabled, to test drivers or display issues, but it's doing the same thing.
My System:
Windows 7 Ultimate 64
AMD Phenom 2 X2 550 3.1GHz
4GB RAM
AMD Radeon HD7800.
I have gotten to a point where I have the round text,, I have a seal with a blank space.. I would like to put the round text into the blank space,, but when I try, and no matter how I try,, the text is a white square with round text on it when I try to place it in the circle.
The other thought that came to me,, what if ..(the text circle size was a guess) the text does not fit.. how do I expand or collape it? I know I have in the pass while playing with round text.. gone back to that effect and changed angles, start points etc.. is that the only way?
I have attached what I have so far. ( I tried to attach the Paint.net file but I guess you can't, so these are the two I am working on,, as layers in Paint.net)
Firstly, I'm using Illustrator CS6. I'd like to round a specific corner of a shape (a rectangle to be specific). I've seen in other posts that the CornerEffects.jsx script should work. But every time I select my rectangle, go to File > Scripts > CornerEffects.jsx I get this pop-up.
View 5 Replies View RelatedHow can I get my inner glow to go around a sharp corner? It seems to be cutt off and doesn't go around a sharp corner I have...
View 4 Replies View Relatedi would like to know how to measure the angle of this shape/radius i think it might be is there a corner angle i can see using some tool.
View 12 Replies View RelatedUsing Inkscape, I can easily create an hexagon with rounded courners. The result in below in yellow (the right hexagon). It's possible to see that not only the corners are rounded, but the entire shape is (the lines around the hexagon aren't completely straight). I am now trying to acheive the same effect with Illustrator CS6, but I can't find out how. The closest I got is the white hexagon below (on the left). The corners are rounded but the lines are straight.
How can I create an hexagon identical to the one in yellow above with Illustrator?
Specify the corner radius of a rounded rectangle?
View 13 Replies View RelatedI have a bent path, standard 90 degree corner. Illustrator CC is not allowing me to align the stroke to the inside of the path/corner. The inside and outside options are grayed out when this path is selected.
Of course, I can create a shape and then all three options for path alignment are usable. But if I cut a gap into the path of that shape it instantly reverts to a center aligned stroke. I can create what I need manually. But this is a time addition.
I'm working in Illustrator CS3. Recently the program has begun to do something I have never notice before. If I use the round corner's filter: Filter>Stylize>Round Cornors then every box I create after using it has rounded corners that I cannot get rid of. Things drawn with the pen tool also have rounded corners I cannot get rid of. The only way to stop the problem seems to be to open a new document and then the tools are set back to their default without automatically rounding corners.
Who do I use the rounded corners filter on a single object at a time and not get to automatically be applied to all subsequent objects created.
InDesign CS4 has a "Corner adjustment for dashed stroke" feature which allows corners of a dashed stroke to have the dash part instead of a gap or a small part of a dash. Interestingly, I cannot find this feature in Illustrator CS4. I believe it is included in Illustrator CS5.Is this feature indeed absent from Illustrator CS4?
View 4 Replies View RelatedAdd one rounded corner effect to a point of a segment or a shape as in indesign
View 6 Replies View RelatedI have created a pie chart and ungrouped the slices.When I use the white arrow to select the slices, two of the shapes are missing a live corner widget in one corner.So, when I move the corners, some of the corners remain unchanged.Also, the large blue shape on the right will not change at all.
View 3 Replies View RelatedI'm trying to learn illustrator cs2 on my own and am having some issues with a few basic functions. I am drawing shapes using the rectangle, ellipses and trying to join them together. How do i trim 2 lines together to make a corner. I would like to cut off the exess at the ends by cutting to the other lines. I know this seems basic but I can't figure it out. In the end I want to make a figure using all the drawing tools ( pen, line, shapes etc) and have the outline just one feature.
View 8 Replies View RelatedIs there such a thing as a corner anchor point with handles? It's quite a common thing in other vector programs (i.e. Inkscape), but I can't change the direction (angle) of the curve leaving/entering a corner anchor point.
View 4 Replies View RelatedI need the x, y origin point to be in the lower left corner. In the past I was able to go into the Adobe Illustrator setting and change some code so when I double clicked in the left corner of the ruler it would switch my origin to lower left. Now there is nothing in the setting folder because this program is on the cloud.
View 2 Replies View RelatedIs it possible to find the value of the corner radius of the rounded corners for a rectangle that was created with the Rounded Rectangle Tool. This if for CS4.
View 6 Replies View RelatedI'm using Illustrator CS6. When I create a simple overlapping daisy brush and apply this to a rectangular path the corner tile seems to have lots of nodes. I apply the brush to the path and then expand appearance. Image attached
View 2 Replies View Related