I've already created the file. Can'f find anything under FileDoc Set-up. Nothing in the Print dialog box affects the change >when I'm working on the file.<
Where do I look to change it? Somehow this would seem to be very obvious, but it's hiding somewhere.
I am using CS5 on Windows 7.
When i change from portrait too landscape the drawing still prints in portrait. What can i do too solve this?
View 9 Replies View RelatedSo, everything is working great in PS CC on my Surface Pro 2, except if i rotate my tablet to portrait mode.
The main window stops with a bunch of empty space below it. It will not stretch any further down than what you see. Also, looks like the ui on the top right is a bit cut off. I'd love to be able to use the full screen in portrait mode, but just haven't been able to figure out what the issue is. I'm running a fully updated Photoshop CC on an up to date Windows 8.1.
I tried printing a plan with my printer and for some reason it wont print in portrait mode, no matter how much i change the settings it does not change the page orientation, the preview also shows it to be in landscape mode
View 3 Replies View RelatedI have tested this in both LR4 and 4.1RC2. 3.x versions and below I never seemed to have a problem. Using Windows 7 x64 SP1.If I have an export preset that adds a text watermark, it works fine in any image that is either already smaller than, or gets resized to 3118 pixels in height. If I tell it to resize to 3119 pixels, then the watermark is never added.
I usually crop all my images to 8x10 ratio. And then dont resize them at all, so they stay at their maximum resolution.The watermark is simply a TTF Font, set to show up proportionally in the lower right corner.
Here is the 3118 pixels tall image.And here is when it is resized to 3119 pixels tall:
In InDesign I can press W to show or hide everything around the page I am working on. In Illustrator I can't find a similar option. I am working on something and a lot of things are outside of the actual drawing area. The problem is that I see everything all the time and so I never get a good impression of how the illustration will look when finished/printed! I now have to export a jpg in order to get a good impression! Or I have to add a layer on top of everything and place white blocks around the actual drawing area in order to get a good impression of the actual artwork.
View 10 Replies View RelatedI have to use a german version of Illustrator and will be translating names of menu items.
I'm working with an illustrator file with several drawing areas. I often need to insert a new drawing area. I then reposition the new area and the content of the old ones by the menu item "arange drawing areas" ("Zeichenflächen neu anordnen") and check the check box "move content with drawing area" (Bildmaterial mit Zeichfläche verschieben"). However, this does not move elements which have been hidden or disabled using the according icons in the layers dialog. How can I achieve this? Actually I would be happy if invisible content would be moved together with its drawing area, since it is somewhat logic that disabled contents are not moved.
When I try to copy and paste a graphic into another illustrator file I get the message: "Can't paste the objects. The requested transformation would make some objects fall completely off the drawing area?" Do I need to change a pref setting? I'm using illus cs5.
View 13 Replies View RelatedWatching the movie in Digital Tutors: Understanding Perspective Drawing in Illustrator - Movie 6: 7:20
In this movie, and in Adobe instructions, it says that to change a planes position onto a particluar point of an object from its default position of 0 one needs to place cursor over the point that you wish the plane to come to and hold shift down. When I do this, the plane I want to move to that point disappears. When I make it reappear, it is in its original position of 0.
how to make it move where I want it to?
I can't print my drawings in PDF with format A2, A1, A0 in landscape with good orientation (A3 is ok). The attachment file "ScreenShot-A1" is the only correct pdf but oriented in portrait.
If I print with landscape orientation (preview on Autocad is good), I get the pdf file "Document-A1".
Note: We can't use DwgToPdf due to problem lines which disappeared or moved with different versions of Adobe Reader.
My company imposed PdfCreator V1.2.2.
Is it possible to set print area in Inventor assembly mode. I have a vertical tall assembly that I want to print. But, when I print it includes the Inventor background as well in the print & because of that I am not able to orient my assembly properly. So, is there a way to get rid of the background or set a print area while printing.
View 9 Replies View RelatedAfter selecting the area type tool, I try to click and drag but I get an error message: You must click on a non-compound, non-masking path to create text inside a path. This worked before but I must have screwed something up.
View 3 Replies View RelatedI have a picture of me and i need to edit to have only the contour in vectors, or atleast it should be a black/white vector portrait, because i need to paint it with colors, it should be like te game " color by number".
View 3 Replies View RelatedI opened a PDF file that is in landscape and it shows up in portrait view, so I can't edit it easily, since it is sideways. How can I change the vew?
View 2 Replies View RelatedI have started Brian Benton's tutorials and hit a problem on the second one, "Quick Run Thru". The problem is that the object drawn is too small on the screen to be useful. This was the result of drawing the 50x30 rectangle called for in the tutorial. My First Rectangle17-07-2013 8-15-10 AM.jpg What setting adjustment is required to show the rectangle as it appears in the tutorial - i.e. larger on the screen so I can do something with it.
View 6 Replies View RelatedI create a palette dialog. I put the Button icon on it. When I click the Button, the cursor still on the palette dialog. I want to the cursor move to dawing area(any drawing background) just after I click the Button. Is it possible?
View 2 Replies View RelatedI read Chris' response to the issue of the screen going dark when using tools. He said to set the drawing mode to basic in preferences. I can't find an option anywhere in preferences to do this. Where do I go to accomplish this?
View 1 Replies View RelatedBasicaly when I'm drawing something I'm starting to notice that quite often photoshop 'randomly' repeats my last action or makes a line from where I clicked last. I can not explain why its happening its very odd. I'd like to know how to disable this sinceUsing PS cs5 windows 7 64-bit. I'm including a video.
View 2 Replies View RelatedI would like to be able to draw squares by the area they should have. So that if I need a square of 50m2 autocad automatically draws a square of sqrt(50) x sqrt(50) Because right now I have to draw 200 squares with 100 different areas and I have to calculate and manually draw each one of them.
View 3 Replies View RelatedToday i Get new Drawing then i tried to find out the area of certain room. Then The Room less than 10 m2 is ok but the area more than 10 m2 meter is coming like this area 1.03310963E+07. How to change this setting.
View 3 Replies View RelatedMy question is to find the dimension in the drawing area
for example
If we observe in the drawing left hand site we can see alphabets in the border area and number at top border area
if the dimension lies between "A" on left hand side and "1" on top border srea
then i want a message the dimension lies on A1
Is it possible to get the "actual" calculated area of the face of a part from a drawing view? I looked at the drawing view object in the api but didn't find what I was looking for. What my goal is, I want to calculate the actual square foot of this piece and then subtract it from the overall square foot so I can calculate waste. Perimeter's of pieces can be in multiple forms, radial, straight or a combination of the two. See image below.
View 1 Replies View RelatedPlotting to layout (as opposed to extents or window) is infuriating. I cannot get my drawing to center properly within the printable area, and I can find no consistency on how AutoCAD is offsetting my drawing. My titleblock is drawn with a trim line of 22x34". I choose the ANSI D sheet size which is 22x34" and when I preview the plot the bottom left corner is offset from the bottom left corner of the printable area by .25, .25.
If I delete the 22x34 trim line from my titbleblock and replace it with a simple point at the 0, 0 bottom left corner, then when I check the layout and printable area, the point shows up offset from the bottom left corner of the printable area by .0006, .0016. Why is it any different than when a line was drawn? If I delete the point the offset from the bottom left corner of the printable area to the closest drawn element then becomes .0013, .0012.
This is absolutely ridiculous. I want to batch plot and I want to have proper margins, but it seems nothing renders consistently and I am stuck with ill-formatted plots. I would love to batch plot to extents, but as I go through the setup, that is not an option for me, so I appear to be stuck with the layout, which I have never gotten to work properly since it was introduced. What is the trick to make it work?
I am just printing to Adobe PDF with the Acrobat printer.
I've made a simple list box with some text entries. I can drag from any node to Acad's Drawing area and drop it. And without writing any code to capture Drop event, same text is written there in Top Left corner of Drawing area.
I want to Catpure this Drop even of Acad Drawing area. I will then be able to use Jig classes to add my own entities.
I tried Application.DoDragDrop() method and invoke DragTarget.OnDrop() but confused very much
I am having a problem with AutoCad Architecture 2014 on my Mac Pro running Parallels and Windows XP.
The crosshair, grid lines,and actual drawing do not show up on my work space, either Model or Paper. When I installed the software two days ago, the software was working properly. I could see what I was supposed to on the drawing space. Something happened that has caused those items to disappear. I have uninstalled and reinstalled the software two or three times but continue to have the problem. Since I am new to ACA, there is likely a setting that I have overlooked or accidentally changed.
Is there any command that the calculated area may appear on the drawing?
or
How can i calculate several small areas in one command only?
when I saw this option was possible to make the right click act like a space bar or enter when in the drawing area.
On the pc, you can go to options where it is there. I can't find the options for a mac.
When i use panning in 2D mode the drawing disappears from my viewport. Autocad and all tools are still visible but there is nothing in drawing screen. When i zoom extent(z+e) it comes back again but in a couple minutes it disappears again while i am panning.
View 9 Replies View RelatedStarting a drawing which now needs a revision. Can't for the life of me find a revision cloud tool to mark up a change. This is the feature in SW [URL].......
View 1 Replies View RelatedSomewhere along the lines I must have clicked something to lock my views in drawing mode once I place them because after placement I cannot click and drag them around anymore...
Inventor 2013 PDS
----------------------
Inventor 2014 PDS
Does AutoCAD Architecture 2012 have a single drawing mode?
View 2 Replies View Related