Illustrator :: Text Along A Circle
Apr 25, 2012
Whenever I click to add text to this path, it starts the text at a different point on the path instead of directly where I clicked. If you can see it, towards the left side of the circle where it says "path" in green. Thats where I clicked, but as you can see the actual text would start a little further on the right side
How can I change this...Also I will add. Once I do type my text it is no longer selectable. After typing I switch up to my direct select tool, and as I hover over the text nothing happens. I cant select it, I can only select the blue bars on the sides of it. I want to be able to select my text also. Shouldnt the blue bars be at the end and the beginning of the text, not so far away from it
View 1 Replies
ADVERTISEMENT
Nov 5, 2012
I've been looking for an easy way to make text round a circle go outward, like in this picture: [URL] It would be best if the text on the right side would go inward actually, but this would be a start.
Is there an easy way in Illustrator to do this in which I can also add text afterwards?
View 2 Replies
View Related
Oct 22, 2013
See image attached. I have tried everything to get this text effect. Flaring type around a circle. Not text on a path. How do you do this in Illustrator or InDesign? There is a way to do it with the Polar Grid Tool in Illustrator but there's got to be an easier way. With the Polar Grid Tool it would be hard to make edits and delete lines without having to remake the whole thing.
View 3 Replies
View Related
Jul 13, 2009
I have a circle that I added text to and it goes from left to right works fine.
The issue is adding text to the bottom to the circle. I have an Illustrator book but this is not covered.
View 6 Replies
View Related
Jul 6, 2012
I have a circle and a text as shown below. If i try to align the text and the cirlce, they are not aligning exactly. There is some difference in it as shown below in the first alignment. If i convert the text to outline and align, its perfect. Is there any way to align the text with circle exactly?
View 5 Replies
View Related
May 29, 2009
I'm curious if there is a quick and clean way to get text to extend out from around a circle. Meaning, the first letter of each text word is closest to the center of the circle, and the last letter of each word is farthest away from the center of the circle.
I know that I could simply type each word out and manually rotate it with a moved centerpoint, and even step+repeat, but is there no way of drawing a circle and then have the text come out from it?
View 22 Replies
View Related
Oct 1, 2012
How can I repeat text several times and put it into a circle with the words continuously repeated into the circle if that makes sense.
View 2 Replies
View Related
Mar 21, 2014
I am designing a logo in a circle form. I have written the lettering on top of the circle and now would like to write underneath the circle.
View 1 Replies
View Related
Nov 24, 2013
I have made this planet and I want its ring to look as it's spinning around it, So the upper of the ring should go behind the actual planet! How can I do that? Also how can I add some volume to the ring to make it look a bit more realistic?
View 5 Replies
View Related
Dec 9, 2012
Now, with that task simplified, I'm not sure how to change the color of the text created using this tool.
View 1 Replies
View Related
May 22, 2012
Using: Xara Photo & Graphic Design 6
AMD Athlon II X2 255 Processor 3.10 GHz
2.00GB (1.75 GB usable) RAM
64-bit OS
I follow the tutorial in the Xara Help, but cannot get the results shown. I draw the circle, compose the text, and set it to the middle Select both circle and text Arrange/Fit Text to Curve....the text appears around the lower, right side of the cirle After all this I am unable to manipulate the text (It's a piece of cake to do this in Publisher 2010, but it has some minor problems in appearance)
View 2 Replies
View Related
Jul 10, 2013
I created the image below (mostly using a photoshop template I downloaded), but I created the outside text on my own, which I'm having a problem aligning properly. If you notice in the below image, the outside text alignment looks bad.
For the current version below, I used the Warp Text -> Arc tool, but it seems like that tool can't arc beyond a half circle, so I created 2 Arc'd text items and tried pushing them together, which creates the bad alignment you see. Is there any way to create text in a perfect circle in photoshop (or any other adobe product)?
View 2 Replies
View Related
Apr 6, 2011
I am using Photoshop Elements (version 4) and I am working with text around a circle. I downloaded a premade text-on-a-path file made by someone with the full Photoshop and it works almost perfectly for what I need. The problem I have is that the text goes upside-down at the bottom of the circle, so how to make a file with the text right-side up at the bottom of the circle. This would make the text upside-down at the top of the circle, but that's fine as I will just use two separate text layers (one for the top and one for the bottom). I've included a quick mock-up of what I'm hoping to have, made with PSE's "Warp text" option which looks messy. I've also attached the psd file I'm using for the top of the circle. (I can't post links yet so they are attached).
Text on a circle.psd
Image:
View 4 Replies
View Related
Nov 17, 2012
How can I make text go around in a circle? I tried doing arc in the warped text option but it's not round enough.
View 7 Replies
View Related
Sep 23, 2013
I understand how to make text wrap around a circle by using the path tool. But is there any way to make the text wrap around it in a sunburst shape? So that each returned line ends or begins at the path? Here's an image to describe my question.
View 3 Replies
View Related
Aug 28, 2013
How to flip the text in my circle using Photo Shop CS6 (cloud version).
I made McDermott as one layer, then photography as another layer. I want Photography to be right side up within the circle, it's upside down as it is now.
Here is a logo I am trying to create for my photography. Once I get the Photography font turned right side up, I will insert a large M in the circle - but 1st things 1st.
View 17 Replies
View Related
Apr 8, 2012
Working on a poster, with a 2D sphere and need to create text along that circluar edge. When select text.. it is always along a straight line. How can it be made along a circular path?
Using 7.0 now , trying to install trial version of CS5.5
View 1 Replies
View Related
Oct 12, 2011
[URL]...
Basically, I have a text and I want it to "circulate" around a certain point, with perspective and readability as demonstrated on the picture.
View 3 Replies
View Related
Aug 8, 2013
I know how to make a sentence go around the inside/outside of a circle, but suppose the sentence is not a line of typed text, but rather a line of hand-calligraphed letters which have been scanned and vectorized?
Another way of asking my question: how would you put a line of curves (letters) around a circle? To visualize, it is for a flat, coin-like pendant which will have a quote going around it.
View 14 Replies
View Related
Apr 15, 2013
how to fit text to path like the example below. I can get text wrapped to a circle, but I am not sure how to get the outside edge to be wider than the inside edge like the example. Using X4.
View 12 Replies
View Related
May 4, 2003
I was just wondering how to make text into a semi-circle. Like if I'm trying to make a logo like the US presidencial seals and want text around the outside of a circle. I tried using the warp features but it wouldn't work.
View 15 Replies
View Related
Jan 10, 2006
I have a White Circle with a very thick black outline/border. Thick enough to write TEXT.
My exact words:
"Heart of a Lion. Mind of a Panther."
When I **ARC** this text, or any small phrase of it (like "heart of a lion" only), it will never bend the right way to fit into my black circular outline/border.
View 2 Replies
View Related
Sep 5, 2011
I'm trying to put a text around a circle / arc.
I'm able to create an ellipse with the select tool, create a path from it and then add a text "along the path". Unfortunately I can't specify on what position of the arc/ellipse the text should start (left-upper corner, middle, right upper corner, etc.).
View 2 Replies
View Related
Dec 5, 2012
I am trying to circle one of the letters and each will receive a number sequence afterwards for the comm addresses (is what I want to do anyway). This is a gov project so I have to ensure everything is addressed properly.
Circling the prefix would make this look ideal but I don't know if there's a way to do it. I tried looking but couldn't find a way to do it.
The only way I could think to do it is do it manually with attdef and create a defined block with the prefix area already circled.
View 9 Replies
View Related
Aug 26, 2011
I'm looking for a way to bend text. I would like to create a circle of a text. I attached an example.
View 2 Replies
View Related
May 17, 2013
I'm aware that you can print text along a line. I was just wondering if I missed an even easier option for when I want to print around in a circle.
I'm trying to prepare a picture to print onto a DVD. Since the picture was for a cruise around Australia I thought it might be an idea to just print in a circle? Perhaps have text arch up at top & down at bottom?
View 3 Replies
View Related
Jun 30, 2011
Im trying to weld text into the inside of a circle. I can weld the base lines of my text to the circle's edge but i can get the base line to follow the curve of the circle.
This is a practice design for a laser engraver. Im new to Corel and laser engraving. The shop I work at has the equiptment and software for the process and I've recently been granted access to do some personal stuff.
View 1 Replies
View Related
May 25, 2011
I know how to get the text on the cirle line but when I type in the text, it will only read from left to right. I want to put my text at the bottom of the circle and have in go left to right with the text right side up. But every time I try and put the text at the bottom of the circle the text is upside down and right to left.
View 3 Replies
View Related
Jan 13, 2009
I want to create a circle, then wrap text in a curve around the inside of the circle. How do I do that?
View 3 Replies
View Related
May 10, 2004
how to make text run in a complete circle, Photoshop seems to only do it in a semi circle.
View 1 Replies
View Related
Jan 16, 2003
I would like to cut out a perfect circle on a digital picture and rotate text around the circle. I have not been able to find a clean way of doing this.
View 2 Replies
View Related