Illustrator Scripting :: Overriding Category Axis Tick Marks In Graphs?
Nov 6, 2012
We are introducing a new graph design, but has a problem with not being able to override the tick marks in the category axis in Illustrator CS5. A typical graph (line layout) can have 250 observations, and since we have the tick marks on full width, the graph gets "crowded" with black lines.
In the value axis there is possibilites for overriding the values, but not on the category axis.
Is there any way to script so that the tick marks in the category axis can be reduced/overrided to e.g. 1 in 20?
View 3 Replies
ADVERTISEMENT
Jul 24, 2013
I need to recreate this dial and I've learned how to create evenly spaced tick marks within a circle, but this is an ellipse. Here, I attempted to draw two ellipse then used the scissors to cut them to size. Then I used the line tool and drew each of the tick marks. Then I adjusted the weights of each tick. This is not a good method because the end ticks are not meeting the ends of the ellipse perfectly, leaving a tiny bit of tick mark outside the ellipse. Here is what I ended up with:
But this is what I need to create: (I only need to create the arched part with tick marks of this dial)
View 25 Replies
View Related
May 21, 2012
I learned out to make the tick marks using copies and rotation. My question now is, how is the rotation calculated so A) I get the correct placement of the tick marks, especially the small ones as there are so many and B) how do I calculate the rotation degree so that I have the proper amount of space at the bottom of the guage/dial?
I know how to get the large tick marks and the small tick marks, if I were placing them evenly around the entire circle, I would know how to do that also - but since I'm placing them around only a portion of the circle (although still evenly) I'm lost. I can only figure out the space by hit and miss calculations and that is taking much too long. I would also need to know how much to rotate the entire thing by in order to get the open space at the bottom as shown.
View 4 Replies
View Related
Dec 18, 2012
I'm try to automate the importing of the Varaible and datasets into my graphs via Scripting, but the ImportVaraibles() function doesn't seem to work. Here is my Script, mostly copied from the example script provided with Illustrator (CS5). And, this works manually, using the file names in the script, via Load Variable Library
Set appRef = CreateObject(strIllistratorVersion)
'Open the file and import the datasets
Set docRef = appRef.Open(strTemplate & "200-500.ai")
'docRef.Datasets.RemoveAll
docRef.Variables("Yearbook").Delete
Here is the problem, after I delete the previous library, then this next line, right from the example, does nothing
The script then exits with 'No Datasets in this document'
docRef.ImportVariables (strXMLFolder & "Lumber_200-500.xml")
'appRef.DoJavaScript "alert('Template:" & strTemplate & strRange & ".ai | XML file:" & strXMLFolder & "" & objFile.Name & "^')"
If (appRef.Documents.Count > 0) Then
Set docRef = appRef.Documents(1)
[Code]....
If I remove that delete line, the script runs, but just uses whatever Variables I had last loaded, not the XML file.
It's simply not loading. What do I need to do to get it to load?
View 8 Replies
View Related
Sep 4, 2013
I have been working on a drawing and out of the blue, when I opened it the other day, all this tick marks where peppered all over the drawing. I discovered they were like point marks from dimension layers that were turned off. If I freeze the layer on top of turning it off, the tick marks do go away. I am running an old version of Autocad, 2007.
View 4 Replies
View Related
Jun 15, 2012
Is there a way to adjust the length of the tick marks used in dimension strings? I'd like something other than the supplied Diagonal 1/8" or Diagonal 3/64" options.
View 1 Replies
View Related
May 9, 2011
I have a file that the architectural tick marks are not solid. They are an outline of a rectangle.
fillmode =1
shademode = 2dwireframe
options/display = solid fill is checked.
I am on ACA2011. It does not matter if I am in model or a viewport. It is the same.
I have another file open and that dim ticks are filled.
I have imported the dim string into the one that does not work and still nothing.
View 6 Replies
View Related
Feb 24, 2011
Using C3D 2010, I have a drawing that has a horizontal alignment and it is stationed. I see text at every 100 feet and tick every 50 feet. Perfect. I have that drawing x-refed into another drawing. The station ticks take on the properties of the current layer in the drawing they are x-refed into. If I change to layer defpoints, the tick to not plot! Shouldn't the ticks be fixed to a certain layer?
View 4 Replies
View Related
Apr 4, 2012
The linear stretch works fine but changing the length affects the position of the tick marks of the polar stretch. If I change the degrees to 0-360 then it's not a problem but I want to restrict to 285-345 deg.
I can't figure out how to move the base angle of the polar stretch with the linear stretch.
View 2 Replies
View Related
Jul 26, 2012
I have the bottom axis selected and trying to change my minor tick interval from 5' to 2.5' on the grid in the Horizontal Axes tab, but each time I type in 2.5' my minor horizontal tick intervals disappear. The lowest I can set my interval is to 3.5'. What is causing the interval to disappear? The major tick interval is set to 50' in the Horizontal Axes tab and my Major tick interval is 20' in the Vertical Axes tab with 2.5' for the minor. My Display settings have everything unfrozen and turned on.
Working in AutoCAD Civil 3D 2011
View 7 Replies
View Related
Jun 13, 2013
I have a question about using Find and Replace in an Action. For a bar chart with negative values, Illustrator will generate the value on the axis using a hyphen (e.g., -1, -2, -3). I would like to change the hyphens to en dashes (–1, –2, –3).
I have 150 graphs, so the easiest way to do this would be to use an batch action on all graphs in a folder. I first flatten the graph and then do a find-and-replace..The trouble is that I get prompted at each find and replace..Of course I can click Find, Replace All, OK, Done each time, but this essentially defeats the purpose of creating an action.
Is it possible to suppress the Find and Replace window and set the action to Replace All without prompting?
View 4 Replies
View Related
Jan 24, 2013
I can't open an illustration with two pie graphs in CS6. I am saving as CS6 format.I tried to recreate again and save under multiple file names and still none will open.
View 19 Replies
View Related
Mar 17, 2013
After selecting the graph, I then select data under Object>Graph>Data. The window comes up, but no data - to modify!
View 4 Replies
View Related
Jan 7, 2014
Mac, Illustrator CC.(Vent from CS 5 to CC). I am producing an annual report containing a lot of graphs using CC. Hoewever i stil have to use Indesign CS5 (InCopy later on).I have experieced for several times now that an error occurs after i place the charts in InDesign. As i try to open the charts from within InDesign, i get: Errormessage: "see Attached" - then it opens - completely empty.Afterwards trying to open from illustrator CC i get the same errrormessage "see Attached" - then it opens - completely empty.However i can open the graphs from illustrator CS5. But only 1 layer and all hidden layers thrown away.Have you experienced something linke this using CC - or do you know if the graph possibilities have changed in CC.
perhaps the files ar damaged in the moment i open from inside InDesign CS5?
View 4 Replies
View Related
Mar 1, 2013
I have created reports with infographics (bar charts/pie charts etc.) where the raw data and charts were created in Excel and then I copy it into Illustrator and tweak the design (color, text, etc) and then drop it into InDesign.
I am now in the process of creating several (30+) reports that will use the same design template from InDesign - but all of the garphics will be uniqe.
What is the best approach to create all of these graphs? Is there a script or macro that I can create and save when I tweak one graph, and then apply it to the subsequent graphs?
I know Illustrator has the graphing function but I havent had too much luck with and, and some of the graphs that I will create, such as donut graphs, cannot be created in Illustrator.
View 3 Replies
View Related
Sep 23, 2013
Any easy way to add the numbers/values into each bar in a bar graph and have them appear automatically when importing data from excel? I'm working w Illustrator CC.
View 1 Replies
View Related
Oct 4, 2013
I've been trying to use graph tool in Illustrator CS6 (I have Creative Cloud..) but having some issues when changing the design of columns. I'll create a design for a certain set of columns, but when I try to use the design in the graph itself they disappear completely. The data still shows in the data menu, but no bars! And its not on all the bars, usually just one set. I've tried reentering the data and also recreating the column design and nothing seems to be working..I keep having to restart graphs and having the same issue.
View 1 Replies
View Related
Mar 2, 2008
Doesn't seem to be possible. "Expand..." does absolutely nothing, and "Expand Appearance" is disabled.
View 5 Replies
View Related
Jul 16, 2008
How to transform the y-axis to a logarithmic scale when creating line-graphs in Illustrator?
View 3 Replies
View Related
Aug 28, 2013
I have a horizontal bar graphic and I want to make it have the same shape than a circular graphic that I have as background.
What I do first is to rotate the graph (after converting it in an image) to the right angle, depending on where it has to be positioned. After that, I use the Effect->Deform->Arc to make it fit in the same shape as the circular graph. But when I do those processes (in any order) I get a distorted image, with lines not describing concentric lines (not as radius, I mean).
I got the perfect shape working on a MAC, but now I am working on PC. How can I achieve the same?
I attach an image descrbing what I am telling.
View 8 Replies
View Related
Jan 9, 2014
I have several Freehand bar graphs and line graphs that I need to convert to Illustrator.So far, I have saved the files to Illustrator 7 and then opened them in Illustrator CS2.
But the numbers underlying the graphs don't seem to come through.How can I keep those numbers intact, bringing them in from Illustrator so that I can go back into them and update numbers to generate the bar graphs and line graphs in Illustrator?
View 3 Replies
View Related
Aug 25, 2010
Is it possible to automatically project the x-axis, z-axis or z-axis onto the sketch plane?
I.e. every time you open a new sketch the corresponding lateral and vertical axis will be projected onto the sketch.
View 9 Replies
View Related
Aug 5, 2013
I am making the hands of a clock with tick marks held in a particular spot with an invisible bounding box. When I export as a png the bounding box disappears and all I have is the tick mark. Maybe a boundindg box isn't the correct description? I have made the hand using the rectangle shape with no fill and no line. The tick mark is contained within this space. But somehow when it is exported using png the invisible containment disappears. I need that to hold my tick mark in place as the hand goes around the clock.
View 18 Replies
View Related
Jul 31, 2013
In a lab the students get this kind of graphs to later be processed in an axial system: a grayed pencil draw, very delicate, with all the imperfections in weight, intensity, etc.
We need to obtain an uniform line (a solid one, without gray variations, same weight, etc)
Autotrace seems the best tools although the results appear a little irregular. What could be the best approach as we have hundreds to process?
Beginning with the scanning (more resolution?) and processing firstly in Photoshop?
View 9 Replies
View Related
Mar 11, 2013
I have a detailed graph that is created in Excel that I want to paste into Illustrator so that I can save it as a high resolution TIFF file for submission to a journal.
In Excel the graph looks like this:
But when I select it (using Select Objects and then Copy OR Copy as picture) and paste it into Illustrator, it looks like this:
I have used different line formats in Excel for the different curves that are plotted and these obviously don't come through correctly when pasting into Illustrator. The lines are there but the scaling for the dashes or dots seems to be changed (increased). I'm good with Excel but a bit of an Illustrator newbie, why this is happening and can it be corrected.
I am on Win 7 64 bit system using Office 2010 and AI CS6
View 5 Replies
View Related
Apr 24, 2013
I'm trying to create a line graph in Illustrator CS5, with a data set that contains some numbers, but then has gaps before a final number at the end. The graph needs to show a general trend between the gaps.
Is there a way of forcing Illustrator to draw a line between those figures, as it's just leaving a gap in the graph at the moment.
View 4 Replies
View Related
Feb 7, 2014
I created an interactive form in InDesign CC and do not like the check marks as they are not visible enough. Can I globally change the check marks to "X" marks?
View 1 Replies
View Related
May 6, 2012
Can you access graph data through the scripting DOM?
View 3 Replies
View Related
Oct 1, 2012
I had a leaflet given to me that I agreed to edit. It was A4 in size and fold in three so the original has six faces. The owner wants to keep the design but reduce it to a single-sheet double sided one third of A4. So I just did the edits and and made the leaflet into three on a page; like this:
My question is how can I put a cut mark in the page. I am guessing that the leaflets can be cut as required. Or is that not a good thing to do and should I put them on a standard compliment slip size?
View 3 Replies
View Related
Oct 12, 2012
Even though I checkmark Print > Marks & Bleed > Trim Marks they still don't print. I set Type > Roman and Weight > .5pt. I can get these to print?
View 4 Replies
View Related
Feb 28, 2014
how to include selection marks in artwork CS6
View 4 Replies
View Related
