Illustrator SDK :: Can't Insert Entry Into A Hierarchy List
Jun 24, 2012
I'm working on a quick little plug-in with the Illustrator CS3 SDK and am having some troubles inserting a single entry into the hierarchy list. I have confirmed that my suites file is correctly calling in the ADMHierarchyListSuite5 class and am able to do everything I try to do in the following code except for add a new entry.
ASErr NewDialog::Init() {
ASErr rslt;
if(rslt = BaseADMDialog::Init()) {
return(rslt);
}
this->SetThisPointer(this);
IADMItem itmBtnCreate = this->GetItem(kNew_BtnCreateIndex);
[code]....
I set up a quick test with the above if else statement to pinpoint that that is where the problem originates as it always exits on signal 671. I'm building this in Visual Studio 2008.
View 2 Replies
ADVERTISEMENT
Apr 22, 2012
I have Lightroom catalogue of approximately 3000 images, all of which are keyworded. Up until recently, it was possible to have a hierarchy of keywords and now I want to contstruct one from the flat list.
View 1 Replies
View Related
Apr 15, 2012
I have build a comprehensive keyword hirarchie for my underwater pictures that I would like to keep in sync accross different catalogs e.g. that means if I add an other species to the hirarchy in catalog 1 I would like to see this species also in the keyword hirarchary in catalog 2.
View 4 Replies
View Related
Dec 11, 2012
I have a section of code (see below) which runs a program which highlights a part/subassembly red, then gives the user a list dialgue box in order to easily replace the compent. At present, I have this code repeated for each part/subassembly in my main assemby (i.e. FRAME, POWER_RISER, BUSBAR_CHAMBER, BUSBAR_ASSEMBLY...).
Having the code repeated multiple times, means it is very time consuming to modify. I want to be able to generate a list then have the code below, run for each of the entries in the list. So I need something along the lines of
dim mylist as something
mylist = FRAME, POWER_RISER, BUSBAR_CHAMBER, BUSBAR_ASSEMBLY...
FOR each entry in mylist
run all the code below (with the words 'BUSBAR_ASSEMBLY' replaced with 'mylist'
END
[Code] ........
Autodesk Inventor Professional 2011
Windows 7 Enterprise, 64-bit
View 3 Replies
View Related
Aug 20, 2012
In our idw's we have a parameter that is passed from the part to the idw parts list. When we/I edit the length of a part, notice how the entry for "Cutlength" is jogged down a little. To get this back to the correct position, I have to grab the parts list and move it a little. The text jumps to where its supposed to be. Any futher edits to the length of the part does not cause this again. Have never seen anything like this before 2013.
View 6 Replies
View Related
Aug 15, 2011
How can I determine what was selected in the pop-up box and then using that for 1 of 2 things, either 1) Turn off the Edit Box for Hole Spacing if the selected option is 1(which would be value = "0" of the popup list) or 2) Making the portion where it confirms that the Hole Spacing Edit Box is filled out so that if the Pop-up List displays 1, it doesn't check the Hole Spacing Box. Below is the DCL and LISP that I'm currently using.
Here is my current DCL:
questions :dialog {label = "Information for Program";: row {: column {: boxed_radio_row {key = "Galv";label = "Galv Slot Required?";: radio_button {key = "Y"; label = "Yes"; value = "1";}: radio_button {key = "N"; label = "No";}}: boxed_radio_row {key = "Bevel";label = "Is Leg to Face
[Code].....
If needed: AutoCAD 2013 User using Visual LISP for editing LISP and DCL files Also I have AutoCAD 2011 currently still available for us, but we are using AutoCAD 2013 for 99.9% of AutoCAD use
View 6 Replies
View Related
Mar 25, 2013
I just want to clean up some duplicate entries from the external editor drop down list. I know how to create them but how do you delete them?
View 2 Replies
View Related
Nov 13, 2013
presuming I have a selection set of different entities, that might have different linewight.
The code that is responsible for this property is 370
370Lineweight enum value. Stored and moved around as a 16-bit integer.not omitted from here
I need to make all of the entities have the same layer, and to make sure the each entity has the "ByLayer" lineweight.
The problem that I encountered, is the lineweight changement.
This is the colution that I came with, but it doesn't work for me:
(defun c:test () (setq en (car (entsel))) (setq el (entget en)) (setq el1 '()) (setq indx -1) (repeat (length el) (setq indx (1+ indx)) (if (/= (nth indx el) (assoc 370 el)) (setq el1 (cons (nth indx el) el1)) ) ) (setq el el1) (entmod el) (princ) )
Having tested it in different ways, it looks like at the end, el1 represents the association list that I want my object to have, but it doesn't want to update.
View 9 Replies
View Related
Feb 1, 2012
Using Acad 2010
Is there a way to remove the *Model* page setup entry from the list of Page Setups in the Page Setup Manager? This is the first time I am seeing *Model* in the list, and I suspect that it the reason I am not able to generate a PDF for this particular drawing. When I try, I get the following error:
=========================
Job: - Error(s) Did Not Plot
Job ID: 5
Sheet set name:
Date and time started: 2/1/2012 10:34:53 AM
Date and time completed: 2/1/2012 10:34:54 AM
UserID: AchrisK
Profile ID:
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: 123456-Model - Error(s) Did Not Plot
File: C:Drawings123456.dwg
Category name:
Page setup:
Device name:
Plot file path:
Paper size:
ERROR: Internal Error: Failed to get Plot Settings Dictionary.
==================================================
I have this idea that removing *Model* from the list will do it. In addition to causing PDF creation failure, I believe it is also responsible for forcing the Model to always be in the Publish list, even though I have unchecked the "Include model when adding sheets" option. I can remove it from that list manually, but it comes back every time.
View 8 Replies
View Related
Feb 24, 2013
Cannot get Illustrator CS6 to run. All othe CS6 components are running fine.
Every time I try to start Illustrator I get error message:
The procedure entry point
?AcquireVarient@ImageInterface@drawbot@dvaui@@QEBA?BV?intrusive_ptr@UI mageInterface@drawbot@dvaui@@@boost@@V?rational@J@5@@Z could not be located in the dynamic link library dvaui.dll.
This is on a Window 7 Pro PC. CS5 previously ran fine, but computer was rebuilt after a harddrive crash then loaded with CS6 and this problem began. CS6 installation on laptop works fine, so downloaded files are OK.
I have tried to uninstall and reinstall twice, but always the same result.
View 4 Replies
View Related
Aug 28, 2012
I am insert a sheet list table - Two Columns "Dwg #" and "Sheet Title" under the first category (building 1) each column works fine) then under category 2 (building 2) it gets the file name under the dwg #.
View 2 Replies
View Related
Dec 21, 2011
From Project Navigator, I R-click the Project in the SHEET tab. This is not "lit up" to choose.
I am in my cover sheet, paper space, with 51 sheets in the set.
I tried to use the Sheet Set Manager, but I have the same problem.
View 6 Replies
View Related
Jun 26, 2012
We are experiencing a case where the sheet list table will not insert into a page. It works on all other jobs, but this one won't let a sheet list table insert into any page, by any body.
I even tried inserting a block of the table from another set and then updating - all the lines disappeared.
We have done about 200 jobs with these, without trouble and this is the one giving us problems now.
View 9 Replies
View Related
Apr 26, 2013
I'm new to .net for autocad, but very familiar with c#. I studied some samples about creating a block from c#. I have a form for some basic input. When the user presses OK the code checks if the blockname is already in use. When no it creates the block using following
private void make_block() { double nextpoint = 0.0; double linedis = 7.3634; Document doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument; Database db = doc.Database; Editor ed = doc.Editor; using (Transaction tr = db.TransactionManager.StartTransaction()) {
[code]......
The code runs successfully (meaning i don't get any errors), but when I want to insert the block it isn't in the list of blocks.
View 2 Replies
View Related
Mar 12, 2013
I did that some time ago but can't remind now and searching wasn't success.
View 1 Replies
View Related
Jan 16, 2012
I have X5 and would like to know if there is anyway I can insert an excel name list into a coreldraw file. The file is a layout of badges with a name on 1 line of text, I want to change each line by inserting or dropping the name in with the name list I have in excel. Then there's no worries with spelling corrections on my part.
View 5 Replies
View Related
Nov 6, 2013
“insert sheet list table” is not active,
I couldn’t figure out in which cases the “insert sheet list table” (attached) gets not active.
This command is supposed to provide table of contents for the layouts specified in the set of sheets pane
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 9 Replies
View Related
Jan 15, 2014
In a new Illustrator file, I select "Object...Graph...Graph Type" and make sure I have pie graph selected. Then I draw the circle I want to be a pie graph, make sure it's selected and choose "Object...Graph...Data" which opens the graph data entry "spreadsheet" but the text box and buttons on the top are greyed out and there are no visible cells. If I move the pointer around inside the window, it does become the "row/column" resize pointer as if there are cells present but disabled.
View 1 Replies
View Related
May 9, 2013
I get a procedure entry point error every time I launch my Illustrator CS6.
View 1 Replies
View Related
Dec 7, 2011
I am having an issue with the sheet set manager's tool to insert sheet list table. I have a new sheet set for a new project that was created entirely in Autocad 2012. When I try to insert a new sheet list table, after I click OK in the Sheet list Table dialoge box, it simply closes to an empty command line with nothing inserted. Why nothing is inserted?
View 2 Replies
View Related
Jun 28, 2009
I'm running WinXP SP3. I just upgraded from CS2 to CS4 (and yes, I installed the update.
I'm currently running 11.0.1).
Whenever I load photoshop, just as it is about to finish "Initializing panels..." an error box pops up saying: "Adobe Photoshop CS4: Photoshop.exe - Entry Point Not Found" "The procedure entry point
Is ThreadDesktop Composited could not be located in the dynamic link library USER32.dll." After the box pops up I press the "Okay" button (that's the only one there) and it then opens Photoshop - which works perfectly. No other errors, no missing functions, no lag.
I'm pretty sure getting an error during start up is a good indication that not everything is 100%.
View 6 Replies
View Related
Apr 18, 2013
I am learning autolips and i found a problem that i can´t solved.
(vl-load-com)(defun c:pmb ( / ss ent pt )(prompt "
selec block : ")(setq ss (ssget '((0 . "INSERT")))) (setq ent (ssname ss 0)), (setq pt (cdr (assoc 10 (entget ent)))) (command "point" pt))
wich this code you select one block and insert one point at insert point´s block.
which this other code yo select all block and insert all point.... but in one block
(vl-load-com) (defun c:pmb11 ( / sele cod bloque nbloque lista pt ) (prompt "
block: ") (setq sele (ssget ( List'(0 . "INSERT"))) Cod 0 )cod (1+ cod) (repeat (sslength sele) (setq bloque (ssname sele cod)) (setq pt (cdr (assoc 10 ( entget bloque)))) (command "punto" pt) );repeat )
View 4 Replies
View Related
Apr 6, 2014
I am using Lightroom 5.3 on Win7 x64. I am having problem during hierarchy in key wording.As shown in A, sometimes it does auto completes but as shown in B many times it doesn’t and manual entry is needed. People have mention on adobe forum it shouldn’t be working but its working sometimes.
View 2 Replies
View Related
Oct 20, 2007
I am using Autocad 2007 I made several blocks with att. And I use this drawing and copy it to the samples/design center folder so that I can see the blocks that I created on the Design center window for use on different other drawings.
My problem is that if I make a cange on the ORIGINAL block drawing how can I update the inserted blocks on the other drawings? I try to delete the block from the local drawing insert block list (is this possible?) to paste the block again with the new changes, but somehow even when I grab the new modified block to inserted again when I do it, it takes the shape of the old version!
View 6 Replies
View Related
Feb 13, 2013
How an I save the lightroom keyword hierarchy to the JPG?It seems that the metadata flattens the hierarchy and saves each node in the hierarchy. I had thought that LR would store with pipes between each node.
Is there a plug-in method to accomplish what I wish to do?I have no desire to preserve side-car files.
View 8 Replies
View Related
Mar 17, 2014
With every version of Lightroom including LR5.3, I've continually had a problem with keywords moving out of order in my keyword hierarchy every time I export images to another PC for example or another folder on the same PC. It makes a mess of my keyword list as well as creates more work putting them all back in place.
View 16 Replies
View Related
May 18, 2012
Logging Lightroom 4 Issue: Importing Keywords Issue
Importing keyword hierarchy from notepad txt document not working as in Lightroom 3...
In Lightroom 3 when write hierarchy in notepad everything in {...} does not display in Lightroom Keyword list but is automatically exported as keyword tag. This is not the case in Lightroom 4.
On below test hierarchy which i have included as a screen cut
When you tick on Giant Golden Mole in Lightroom 3 for instance, the latin name (Chrysospalax trevelyani) as well as the order (Afrosoricida) and family (Chrysochloridae) is automatically tagged. Only the latin name appears though in Lightroom 4 !!
View 2 Replies
View Related
Nov 5, 2011
Why oh why when I export any image from one folder to another do I end up with most keywords applied to that image written to my hierarchical keyword list as a new 1st level keyword and not under the parent keyword as they should be? I've tried everything. I'm using Windows 7 64 bit, with the latest LR 3. Export Synonyms, Include on Export, Export containing keywords are all checked with all the keywords and I've unchecked the Write Keywords as Hierarchy in the Export dialogue. With every export I have to clean up my keyword list and I'm at wits end with wasted hours.
View 7 Replies
View Related
Nov 23, 2010
how to select joint hierarchy with the script
Ex : if we have 10 joints in the scene i want to select the whole hierarchy with script Or if i select 1st joint, then i want select remaining child joints with the script(listRelatives Or listConnecttion).
View 2 Replies
View Related
Jan 11, 2012
I do web development and I am attempting to see if I can ween off Photoshop for what I do, (mainly cutting up images) is there a way to have Gimp view a PS file and include the hierarchy of the layers that are originally laid out in Photoshop?
View 2 Replies
View Related
Dec 10, 2013
Whenever I try to pickwalk a hierarchy using the arrow keys I get the error: Cannot find procedure "EATPickWalker".
View 5 Replies
View Related