Illustrator :: CS5 - Align To Pixel Grid Turned Off
May 30, 2012
Illustrator CS5. I made a 32x32 pixel box, put a 32x32 artboard around it, export it at 72 ppi png, with or without antialiasing which doesn't seem to matter whether it's on or off, yet it always exports out as a 33x33 png instead of a 32x32, adding 1 pixel to each side, tested with a higher resolution, doesn't matter saves with 1 extra pixel on each side example 500x500 will become 501x501, when I look at the picture even if it's a solid color square it will make the edges transparent and ruin the picture on the edges making it hard to fix in another program after exported from illustrator. I tried something out when I searched the internet for solutions, I checked in save for web under Image Size it will say my 32x32 square is 33x33 in that screen but in the info window it is 32x32.
I have align to pixel grid turned off if that matters at all.
Sometimes when I am typing in the width and height in the transform window changing the size it was previously, example from 67.354 W to 67 and 55.271 H to 55, instead of going to 67x55 it will change itself to 67.18 and 55.084 that is an example not from an actual thing I did.
I have turne off Snap to Grid, and Snap to Point.. and I have made sure "Align New Objects To Pixel Grid" under the Transform menu is turned off, yet still my objects are snapping to point intersects... am I missing something?
Align To Pixel Grid a bit more thoroughly. I understand how to use it - to turn it on & off, but I'm a bit confused about the "why & when" of using it. F.I. I'm creating a picturebook with text. So when I export / or save for web, I'll be turning the vector art and text as an image. My understanding is that using ATPG will eliminate the jagginess of the text that would occur, when it becomes an image, if I did not use ATPG.And conversely, if I don't use ATPG, the text will be jaggy when exported to jpg or png. Is this correct?
having issues with getting point sizes on lines below 1 pt. (or inbetween whole numbers).
read in another discussion about turning off "align to pixel grid". can only find that in pull down menu: select, object, not aligned to pixel grid. it doesn't seem to be toggling off/on.
i've never heard of this issue before. i tried opening the file in cs5 and i had the same issues.
I currently have grid setup, and I am unable to put guides specificly where I want, they will either be a few pixels to the left/right of where I actually want. It seems like my guides or rectangles that I make only snap to the grid, and I do not want this to happen since some of my shapes do not fit a grid specifically. Lets say I want my rectangle to be 4.5 Grid blocks (each block being 25 px), so 112.5, it only allows me to do 4 blocks or 5 blocks. Is there a preference that can be changed so I can make free shapes without having them direct on the grid?
Attached an example. I'm trying to make the red box the same width and in the same position as the black and it does not let me.
I guess I found my solution, under the transform fly out menu when "align to pixel grid" is unchecked it fixes this.. Is there a better way to do this though?
When I select Align to Pixel Grid in the Transform Panel, I see line weight changes occur. I try to change the line weight in the either the Stroke or Appearance panel and it will not change, no layers locked, how to change the line weight?
I've been working a good hour on a vector illustration and all of a sudden the "align to pixel grid" feature turned on. It's not selected in the Transform window. In fact, it's grayed out as an option. I restarted Illustrator. Same issue. I restarted my computer. Still happens.
I have a problem with my brush and pencil tool. Whenever I want to draw an object without a stroke and just a fill, it immediately assigns me a stroke in either the colour my fill is, or, if I'm using a gradient, in black. It doesn't have that problem with the pen tool though. I also checked in my presettings and my Transform plaette that the "Align to Pixel Grid" option is unchecked. Also, the "New Art has basic appearance" is unchecked.
When I drag around vector points of paths they are not constrained to the pixel grid, when the option "Snap Vector Tools and Transform to Pixel Grid" is off. This is the behavior I expect.BUT: When I drag whole paths, they snap to the pixel grid, no matter what. I even have snapping completely disabled.
This is particularly annoying when eg. creating a path for a zipper. I first make a path for the inside of the jacket or whatever, then I make one notch for the zipper and copy it over and over again for all the notches. It's very troubling when these elements snap to the pixel grid, because it's very unprecise then.
I am using Adobe Illustrator CC version 17.0.1 x64 on Windows 8.1.
In Edit > Preferences > Guides & Grid I have the Show Pixel Grid option checked but when zoomed in over 600% the pixel grid does not appear. Am I missing something?
making things snap to the pixel grid and in return destroying the ability to align things and rendering the pathfinder tools useless
Try this: New Document for Web (with Align New Objects to Pixel Grid on)Draw a perfect rectangleDraw a perfect ellipseUsing Align to Selection, try aligning the rectangle and the ellipse to their top-left cornerZoom in as far as possible, note that the paths are NOT aligned. Even try manually aligning the two paths by their X and Y co-ordinates, and you will see they snap back 0.5px Repeat the above steps with Align New Objects to Pixel Grid off, and see how things use to actually align...
While I do understand you have done this to try to create pixel-perfect graphics, there has to be another way.. Back in CS4, I had a work-around for the pixel-perfect problem. It involved applying a graphic style with a transform properties of -0.5, -0.5 to individual paths or groups. The reason this worked was that it did not affect the actual co-ordinates of the path and allowed me to snap my paths to whatever I wanted..
Working with web icons, and I can not get some things to line up with each other. Either to the left or to the right. I've shut off snap to pixel grid in transform palette.
I am having trouble with a file that was originally created in Ai CS6 on an iMac.
When I open the file in CS6 on my 15" Retina Macbook Pro, objects that are mathmatically aligned to the pixel grid do not render properly.
See the screen shot to see what I mean.
The files still renders properly when view on the iMac and new objects in the document are also aligned to the grid, at least from the stand point of how it's render.
I guess I created a file with Snap to Pixel Grid turned on.Can't figure out how to turn this off.Created a new file without Pixel Grid Snap enabled and pasted the art into it...still had trouble with aligning points correctly. how to turn off Snap To Pixel Grid?
I made this shape perfectly on the pixel grid with 'Snap to Grid', 'Align to Pixel Grid', and 'Show Grid' on. Every anchor is perfectly placed (i.e. not in the middle of a pixel) but for some reason my X and Y cordinates say it's off by half a pixel. When I change the .5 to .0, it unaligns my object. Why is it doing this? There is an example below of what it's doing.
I was wondering when designing a logo I should worry about aligning my artwork to a pixel grid for use on the web. Should I maybe create the artwork as normal and then save another version that is aligned to pixel grid for web and send them both?
There's a box, I've set it to 0,0 coords, but it will not stick to the top of the artboard. I've tried align to pixel grid on and off (It would not move off 0.318px when I had align pixel grid on, which confused me too!). When I turn align to pixel grid off the box stays closer to the top, BUT when I export for web it sticks a white line in at the very top of the artwork.
If you create a symbol that is pixel perfect, exit out of the symbol and go back in, the pixels bleed into each other because the pixel grid is not aligned correctly. Instead it is aligned to the global document grid which the symbol content is not placed in. It makes no sense to align the pixel grid to the global coordinates when the content by definition is not present in it.
This makes it impossible to use symbols to edit pixel perfect objects because any editing other than the original creation does not display pixels but pixel bleeds.
This is a valid bug in Illustrator CS6. Please specify:
1. Do you understand what I am specifying? If you do not I will provide images as I wish to resolve this functionality. 2. Specify if it has been fixed in Illustrator CC. I do not have an available Win7 installation to test CC but if it is I will acquire one.
Sometimes when I drag a new symbol instance to my artboard and resize it, the instance looses it alignement with the pixel grid.
This happens despite the fact that...
I checked the box for pixel grid alignement when I created the documentthe symbol option is set for align to pixel gridthe original shape in the symbol is aligned to pixel grindthe original shape has the align to pixel grid check box in the transform panel checked So why when I resize the symbol instance does it break the pixel grid alignmnet and result in a blurred 1px stroke?
I recently installed AutoCAD 2012 and have noticed that my crosshairs are moving as if a grid is turned on. I checked my settings and have turned everything off however, the crosshairs continues to move in "jerk-like" movements.
As I recall, back in the 3ds dos days you could create a grid aligned to a face of an object by simply picking 3 vertices on the face. I've never figured out how to do this in MAX. I don't need to align objects but need to move vertices around on a given tilted face.
Occasionally paragraph allignment works opposite for left & right align, usually on Illustrator documents with Russian type.
In additon on center align text I set my cursor to input a period at the end of a sentence, and the period instead gets added to the beginning.
In character palette language is set to English USA, this is point text.
I created a new point text and this is happening, if I paste text from another document alignment works fine, font is Arial black but happens with all fonts.
I've read all I could on snaps, video tutorials, changed every setting.
the only time anything snaps is when I'm creating an object in which case I get a box and the object snaps to other objects, bounding boxes end points, etc.. (useless stuff) but it doesn't work at all otherwise, it does absolutely NOTHING while selecting an object or edible poly/mesh object vertices, etc..
I JUST WANT TO ALIGN A VERTEX TO ANOTHER VERTEX.
I've seen videos of people just dragging the axis to another vertex and that vertex automatically aligning to it... why the heck can't that work for me? I don't even get a line, nothing that looks like any tutorials out there. Everything behaves the exact same way as without snaps. you can't even tell the difference moving things around except there is a little circle at the center of the gizmo. I even checked every box in the snaps settings. It makes me want to throw the computer out the window that it takes 3 hours and still nothing works.
Ultimately I just want to select a grid of vertices and align them in a planar xy axis at the same z value as a single of my choice... why is this so impossible?
this will mark my first question, but most certainly not my last. What I am creating is a 2D array or grid that is in the shape of a square, rotated 45 degrees, and cut to 50% in height. What I would like to know is, what is the best way to create that object? I have created one with the square tool and converted it into a smart object. Is this the best way? or just one way? I would also like to know how to apply a 1X1 pixel grid to just the object,not the entire canvas? It should also share the same attributes that is 45 degree angle and 50% height.
The grid I have set up in photoshop seems to be misaligned. When I click the lower right quadrant of a square it colors the square on the lower right diagonal of it. If try to color it clicking the right half of it, the pixel next to it becomes colored. Clicking the left half of the pixel colors the correct one though. It seems like the grid isn't aligned properly. How do I fix this?
Also, I just switched my grid subdivisions from 1 to 4 and the problem was gone, but none the less, why is it that with gridlines every 1 pixel and subdivision of 1 that the alignment of it is off?
adding a page baseline grid! I love it, but I have one problem with it. For example I set the baseline grid to 13 pt, i have text with line spacing specified to 13 pt. I right-click the paragraph text box and select "Align to baseline grid". Then the text surely is aligned to the grid, BUT the lines are spaced to every other line, instead of every line.
I have a document that is 1in x 1in and the resolution is 10ppi. The grid spacing is 1px but you can see the grid is not aligned with the pixels (which are coloured green in this image).
I am using CS6 and for some reason you have to set up the gridline every 2px with a 2px subdivision.
