GIMP :: How To Transform Only Copied Part Of Image

Oct 20, 2013

Please see at the problem:

[URL]..
[URL]...
[URL]...

I wanted to transform only selected part of image and instead all the layers and all the image was transformed by 1800 degree. How to do this what I want to do with the aid of free gimp?

View 2 Replies


ADVERTISEMENT

GIMP :: How To Transform Rectangle Part To Triangle

Aug 27, 2013

I need to transform a rectangle part of my picture to a triangle, linearly, only with horizontal distortion, keeping vertical positions in place. (a rectangle to a triangle standing on its side, by moving the top corners to one point).

I tried the Cage Transform: the top of the picture seems good, but it also distorts the bottom line in this case. Other tools seem not suitable at all.

View 2 Replies View Related

GIMP :: How To Use Bevel And Emboss Layer Effect On Image Copied From Another Image

Jul 19, 2013

I'm running Gimp 2.8.4 on Ubuntu 13.04 Linux (64-bit) and I'm trying touse the "Bevel and Emboss" layer effect on an image which I copied fromanother image. Here is what I've done:

1. Loaded image 'A' into Gimp
2. Selected a portion of it
3. Used "/Edit/Copy" to copy the selection
4. Used "/Edit/Paste As/New image" to create a new image from the selection
5. In the new window for the new image, "/FX-Foundry/Layer effects/Bevel and Emboss"
6. When the "Bevel and Emboss" window opens, I accept the defaults and click "Ok"

The filter starts to run and then stops with an error message. Here is the message I get:

------------ START ------------------

Bevel and Emboss Message

Error while executing script-fu-layer-effects-bevel-and-emboss:

Error: ( : 1) Procedure execution of gimp-selection-layer-alpha failed on invalid input arguments: Item 'Pasted Layer copy' (87) cannot be used because it has not been added to an image

----------- END -------------------

View 5 Replies View Related

GIMP :: Layers Hiding The Copied Image

Nov 23, 2011

I have an image that I resized and that resulted in a gray checker board pattern above and below the original photo. I tried to add another photos above by copying and pasting it but get nothing I can see.

I tried merging visible layers but that did nothing (obviously since the copied photo is not visible).

Specifically I open the second photo, Select > All, Edit > Copy, went to the first image Edit > Paste resulting in a outline box of about the right size but without anything in it. I dragged this to the place I wanted it but I cannot get it to become visible. When I anchored the layer the outline box went away.

I have two layers but the second layer appears to be exactly like the first one.

View 3 Replies View Related

Photoshop :: Transform Tool On Part Of Image

Sep 24, 2013

I have one problem. I'm using transform tool to scale part of image, but it doesn't look good. Maybe I should use liqify tool but I really don't like it. Here is example of how it looks, at the top left corner of this site [URL]....

View 3 Replies View Related

GIMP :: How To Resize Clip Copied And Pasted From Another Image

Oct 18, 2013

I can't find a way to resize (make smaller) a clip that I have copied and pasted from another image. Here's a screenshot:

[URL].......

How to make the cat smaller?

View 1 Replies View Related

GIMP :: 3D Screenshots - Substitute Image After Transform?

Sep 3, 2011

I want to make some 3D screenshots like Windows Aero or this:

Is it possible to change the images on the individual windows after applying perspective, shadows/etc?

I want to make the overall appearance first, then decide what content to put in the windows.

View 4 Replies View Related

GIMP :: Overlay Portion Of Image With Faded Map With Non-transparent Part Of Second Image

Apr 4, 2012

I have a PNG image with only one layer as a start point. It has a faded map on it.

I have a second PNG image with a hex grid on it. I do colour to Alpha to establish transparency on the hex grid for white filled hexes (others are not filled with white).

Now, I wish to overlay a portion of the first image with the faded map with the non-transparent part of the second image.

So I select by colour (for the hexes not filled with white) on the second image (the overlay) and I then paste to the first image (after creating a transparency layer and selecting it to receive the overlay).

I see the desired overlay section (minus any transparent stuff as expected), however it is centered over the map in the first image, not where I want it to be. It is a floating selection and must be anchored. So I select the anchor icon in the layer dialog and I think I anchor it into the transparency layer on the first image (that's what I'm trying to do anyway).

And then my problem:

I want to move the thing I just pasted in to the right place with respect to the underlying faded map. I attempt to use the move tool, but all I move is the background map (pretty much the opposite of what I want).

Nothing I do seems to let me reselect the pasted-in overlay so that I can move it.

Why I can't ever reposition the pasted in overlay? It should be in the transparency layer I created but even if I select all, I don't seem to be able to move anything other than the background image.

View 2 Replies View Related

GIMP :: Ability To Copy / Cut Image Or Part From One Open Image Into Another

Nov 25, 2013

I have been using gimp now for about 2 months and have just upgraded my OS to Mavericks and upgraded Gimp to 2.8.8.

Upon doing this I seem to have lost the ability to copy/cut an image or part thereof from one open image into another... Example:

I have an image window open with a picture a car and I have an image window open with a race track back ground.

I want to copy the car from image 1 into image 2, but for some reason I cannot do this function anymore. When attempting it, once the item is copies to the clipboard and I then swap to the second image, when I paste as a new layer it pastes the clipboard from that image and not the image from the first window...

View 6 Replies View Related

GIMP :: Moving Certain Part Of The Image?

May 22, 2012

Ive copy and pasted into an image and i thought i got it where i wanted so i saved it and exited the program. But then i realised that the image i pasted was a few pixels off. I have been trying to select a portion of the image and move it to where i want it but cant find how. Ive selected the portion and clicked on move then selection but it moves the selection area not the image within it.

View 1 Replies View Related

Paint.NET :: Make Same Copied Patter Copied In Different Positions In Circle

Mar 18, 2012

I' only trying to create a logo for a project of mine.

This logo is composed by two things: the first one is the picture of the logo itself, than the second is the text part (which is not the hardest thing to do).

What I'm trying to do is, once have drown the "subject" (a light blue drop, in my case), to copy and paste it in order to have other four copies of the same drop, but moved and rotated to create something like a circle..

You can find the original logo I created attached. But I'm not really satisfied with it (this is also why I'm writing here!) =)

I'd like to re-create it and put the drops as in the attached logo....

View 6 Replies View Related

GIMP :: Making Part Of Image Transparent

Nov 18, 2013

I am wanting g to make a person partially transparent for a picture I am working on. I know you can use opacity but after I make the selection, the entire image still gets transparent.

View 6 Replies View Related

GIMP :: Copy Part Of Image And Paste It To Another?

Jan 29, 2012

I have one image that has a specific texture I want to reuse for my own custom image, but I'm not sure how to use it in the paint brush while working on the other one. Can I do it the way I described?

View 2 Replies View Related

GIMP :: Making Part Of Image Transparent?

Jun 30, 2013

I have an image that I am using as an app icon (embedded in a basic4android compilation). The image is in .png form and is a square with rounded corners. I want the corners to be transparent. When I outline the area I want to make transparent and then select clear it changes the current color (black) to white. When I use this saved file in my compilation the icon that it produces has corners that are white not transparent. How should I be doing this?

View 6 Replies View Related

GIMP :: Using Gradient Mask To Blur Part Of Image?

Nov 29, 2010

I have a photo and I would like to blur the bottom of the image while leaving the top of the image sharp, similar to limiting the depth of field by using a large f-stop. I created a gradient mask and then used Filters > Blur but it is not working. If I choose the layer that I created the mask on and choose blur, nothing happens. If I choose the layer (background) under the mask then the whole image blurs.

View 3 Replies View Related

GIMP :: Select Part Of Image On Background Layer

Jan 13, 2012

Is it possible to select a part of an Image on the background layer. And when you delete it, its removed from the rest of the layers as well.

Because I'm working with a DDS image and it has mipmaps (smaller and smaller copies of the background made as seperate layers.)

View 1 Replies View Related

GIMP :: Mouseover Text Or Tagging Part Of Image?

Jun 21, 2011

I am trying to make a mouse over text pop up when you roll over each of these lots on this plat map. Basically it shows a price and acreage size for each lot you rollover. Is this possible with gimp?

View 1 Replies View Related

GIMP :: Select Part Of Image And Copy It To Another Area

Dec 16, 2013

I've tried using GIMP many times, yet I've accomplished very little, given all of GIMP's functionality. For example:

If I want to select part of an image and copy it to another area or to a new image/layer, and also FEATHER the edges, here's how I'd do it in an old graphics app I often used years ago:

1. Select the area.2. Hold Ctrl while moving selection with Move tool.3. Use the slider to soften the edges to my liking.4. Press Enter to anchor selection. Done.

And there were sliders also for opacity and other things. So very SIMPLE because the prog. was designed very intuitively. How would I accomplish the same in GIMP? Well, most of the time, I WOULD ACCOMPLISH NOTHING! At best, I'd enter values into the box, not like the result, enter new values, repeat. And that's on a good day.

Somebody write a SCRIPT/PLUGIN that allows the use of sliders exactly as described above! I desperately want to be a HAPPY GIMP user, but I'm growing ever more hopeless. I don't want to turn on my older PC just to use a graphics app that actually lets me get things done.

View 62 Replies View Related

GIMP :: Aligning Layers - Part Of Image Disappears

Jun 25, 2013

I'm a Gimp newbie, using 2.8.4. I have a png image that's 530 pixels wide. I'm trying to merge it with a white background layer that is 960 pixels wide. I need to align the image to the right side of the background layer. This is what I did:

- opened my image
- created background layer (960 px wide)
- made background layer the bottom layer
- clicked on Alignment tool
- clicked the hand cursor on the image (530 px wide)
- made the background layer the active layer
- set "Relative to:" Active layer
- clicked on the right alignment arrow

The image did move to where I wanted it, but most of the image from the right edge disappeared, so all I've got is a small portion of the left side of the image in the middle of my background layer. Then I did the following:

- merged visible layers with Expand as necessary

That action merged the layers, but all I have is a small part of my image near the center of the background.

Attached File(s) Screenshot from 2013-06-25 19:41:24.png (59.32K)

View 9 Replies View Related

GIMP :: Replicating Part Of Subject / Object In Image?

May 2, 2012

I have been using GIMp to do some basic things but have recent got a but stuck on how to best replicate part of a subject/object in an image. for example

I have an image of a corner of a building with the wall on the left and right, and sky at the top of the image. I would like to extend one of the walls out to extend the width of the image and also replicate the sky.

The walls are on a slight angle so I can not simply do a retangle block and copy/paste, also when I do this on the sky, the gradients of the paste dont match up nicely.

View 1 Replies View Related

GIMP :: Change Brightness / Contrast For Part Of Image

Oct 27, 2012

I am able to change the brightness/contrast for part of an image by using, for example, the Rectangle Select tool. I want to be a little trickier though. I would like to use the rectangle select tool, but have the effect of the brightness/contrast apply 100% at the bottom of the rectangle and say 10% at the top, with gradations from 100 to 10 from bottom to top. Is this possible?

View 3 Replies View Related

GIMP :: Paint Brushing Copied Texture Possible?

Apr 24, 2012

I have an old photograph. The print is not in good shape, it looks like an old oil painting with cracks all over the place. It looks bit like a jigsaw. I have to zoom in quite far and when I do, I can, if I wish, select a small area that is homogeneous. The area is a coat, so it's sort of a cloth texture. Now, to my way of thinking, I wish I could select this small area and the select paintbrush which would lay down a textured area exactly like the selected textured area.  That would be kind of a magical paintbrush.To my limited mind, I think I may have to paint over the whole photograph to restore it. But, anyhow how might I begin to restore this photo I have?

View 2 Replies View Related

GIMP :: Paste In Same Place As Copied Selection Was (2012)

Feb 11, 2012

I have two images of the same size (e.g.800x600)

I select a region of the first image with any selection tool (e.g. the fuzzy select tool) I copy the selection.

Isn't there a way to paste the selection into the second image at exactly the same position where it was in the first image?

It seems to me unbelievable that there is no such option, but I can't ind it. I must be missing it. In Adobe flash it is called "paste in situ".

View 2 Replies View Related

GIMP :: Copied Font Layers Revert To Default While Editing

Nov 25, 2012

In GIMP 2.8, I'm having an issue with font settings not sticking with copied layers.

Steps to reproduce:

1. Click the text tool, then click the canvas.
2. Type the word "Cow".
3. Double Click the word "Cow" and set it to a fancy font, pink, and 24pt.
4. Select the "Cow" text layer and duplicate it.
5. Move the duplicated layer down. You now have two "Cow" layers in a pink, fancy, 24pt font.
6. Double click the word "cow" in the copied layer to highlight the word "Cow".
7. Type "Chicken" over the word "Cow"

Expected result:

The text is now "Chicken" in a fancy, pink, 24pt font.

Actual result:

The text is now "Chicken" in the default font.

In order to keep the font you want, you have to insert the new text after the first letter of the existing word. ie: "CChickenow", then remove the extra "ow" from the end, then remove the "C" from the beginning. This is very tedious and frustrating.

I am aware that you can set a default font to whatever you want (except making it bold by default?). But, if I copy a layer and type over it, it's because I wanted to copy the appearance of the layer, not start over with a new one. Is there a setting I can change? Or is this a known issue with text editing in 2.8?

View 2 Replies View Related

GIMP :: Tool / Plugin For Gimp To Transform Selections

Sep 18, 2011

I have checked the road map for GIMP and I have seen that the Unified transform tool can be expected in version 3.8. (ugh)

Now what I would like to ask is there any tool or plugin for GIMP that can transform my selections? Or is there any open source image editor that can do it.

I'm not an artist and just for this I have to use Photoshop. For me PS is an overkill for just cutting up an image.

View 3 Replies View Related

Lightroom :: Adjustments Are Copied To Next Image?

Jul 16, 2013

Have noticed a strange behavior lately with LR 5 when I am making small adjustments in the Basic panel. The problem seems to happen when I am moving through the images too fast. If I make some adjustments to an image and then hit the arrow key to go to the next image, all of the previous adjustments are copied over. I typically use the Previous button for a lot of my editing but LR does this on it's own. I then need to Reset the photo to default and start over. Not a huge annoyance until it gets to the point where you need to re-edit some photos and it copies over everything. This happened several times to me today. I had an event fully edited but decided there were a few photos that needed minor adjustments. As I was quickly scrolling through making adjustments where needed, I would notice that LR would drastically change the settings to match the previous photo. This completely slowed me down and I had to re-edit so many photos. In some cases it would even copy over the cropping I had done. I hate to say but I am not very impressed with this version of LR so far. Feels rushed and not polished. I understand that each version has it quirks and issues but so many for an established program. Tempted to go back to 4. Slow and unusable healing brush and now this annoyance are two major hits for me.

View 1 Replies View Related

Illustrator :: Editing Image Copied / Pasted Into AI

Mar 7, 2014

I wanted to edit an image that I copied and pasted into Ai, but it will not let me.

View 3 Replies View Related

Photoshop Elements :: Invert Image That Was Copied Back To Front?

Aug 1, 2013

Can I invert an image that was copied back to front?

View 1 Replies View Related

GIMP :: How To Exit Out Of Transform

Jan 18, 2012

I was trying to rotate an image, and after successfully doing so, now I can't exit out of the rotate tool. The layer keeps saying (Transformation). How do I get out of this mode? I want to start duplicating this image and rotating them to different positions, but I need to learn how to get out of this mode.

View 2 Replies View Related

GIMP :: How To Transform A Layer

Dec 16, 2011

I'm working on a project with two layers: (1) a photograph, and (2) a line drawing. The line drawing provides the accurate shape, and I need to stretch the photograph to fit the line drawing fairly precisely. The line drawing is the top layer, and I've already added an alpha layer to it so that I can see the photograph through it. Now I need to rotate, scale, and stretch the photograph to fit. Two questions:

--Does Gimp have a tool akin to P$hop's "free transform," which allows you to rotate, scale, and stretch in a single tool before committing the changes?

--Whenever I start using the rotate or perspective tools, the photograph appears on top (even though it's the bottom layer) and I can no longer see the line drawing. Obviously, this makes it nigh impossible to get an accurate fit. Is there a way of preventing this from happening, so that I can see the transparent top layer even while I'm working on the bottom layer?

View 4 Replies View Related

GIMP :: Script-fu - Best Way To Use Drawable-transform-rotate?

Jul 10, 2013

I'm new here, as well as to script-fu, although I've looked into Scheme and Lisp and know how to program. I'm using Gimp 2.6.12 (the latest version on Linux - Ubuntu 12.04.2)

So, an overview of what I'm trying to do: create a simple clock face (black) with 12 solid white rectangles at the hour marks.

I have a single layer, (black background, white foreground colours), I select a circle, invert the selection and bucket fill.

Then I select a rectangle, fill it, rotate the layer (which cuts out the rectangle, creates a floating selection with it, and rotates that) anchor the flt-sel (and then repeat 12 times).

> (gimp-rect-select image 570 396 25 8 2 0 0) ; select rectangle
(#t)
> (gimp-bucket-fill layer 0 0 100 0 0 0 0) ; fills the selection (stays selected)
(#t)
> (gimp-drawable-transform-rotate layer (/ PI 2) 0 400 400 0 2 0 3 0) ; creates a flt-sel, but returns layer instead of the flt-sel(!?) ...
(4) ; (also deactivates selection)
> (set! fs (car (gimp-image-get-floating-sel image))) ; ... so have to get the flt-sel explicitly
26
> (gimp-floating-sel-anchor fs)
(#t)

This kinda works, but doesn't feel like the optimal way to do it . What I was expecting to do is something like copying the selection, 12 x (rotate and add), bucket-fill.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved