Paint.NET :: Make Same Copied Patter Copied In Different Positions In Circle
Mar 18, 2012
I' only trying to create a logo for a project of mine.
This logo is composed by two things: the first one is the picture of the logo itself, than the second is the text part (which is not the hardest thing to do).
What I'm trying to do is, once have drown the "subject" (a light blue drop, in my case), to copy and paste it in order to have other four copies of the same drop, but moved and rotated to create something like a circle..
You can find the original logo I created attached. But I'm not really satisfied with it (this is also why I'm writing here!) =)
I'd like to re-create it and put the drops as in the attached logo....
I have an old photograph. The print is not in good shape, it looks like an old oil painting with cracks all over the place. It looks bit like a jigsaw. I have to zoom in quite far and when I do, I can, if I wish, select a small area that is homogeneous. The area is a coat, so it's sort of a cloth texture. Now, to my way of thinking, I wish I could select this small area and the select paintbrush which would lay down a textured area exactly like the selected textured area. That would be kind of a magical paintbrush.To my limited mind, I think I may have to paint over the whole photograph to restore it. But, anyhow how might I begin to restore this photo I have?
When importing into LR5, Lightroom shows a progress bar which moves along and says importing files. After a few minutes the progress bar reaches the end, and Lightroom says some files were not imported and lists allt he files that should have imported without importing anything.Ive tried importing from memory card, copied the files to my hard drive and tried the import from there also, all with the same result.Files are NEFF Nikon files.
I am trying to make a poster I have the background done and I want to add a pic. The pic is approx 4x6, the poster is 11x17. When I copy the pic into the poster it becomes very small. How do I retain the original size? When I try to transform the pic it becomes blurry.
I know you cant crop in Illustrator like you can in Photoshop.But is it possible to copy an object and create a new canvas and have it so that it fits exactly to the object? I just want an object on its own, but I dont know how to do this if it is possible.
I have recently moved my entire Lightroom catalogue along with the images to a new PC. I ensured all the paths were identical, and everything seemed to have gone smoothly except that now, when I import, Lightroom cannot correctly identify which images are already in the catalogue and will try to import duplicates.
For example, with the root image folder selected in the import dialogue, Lightroom will find the following: With "All Photos" selected, Lightroom identifies 13165 photos to import (this is what I would expect - my entire library plus a few new images).With "New Photos" selected, Lightroom finds 11537 photos - only slightly fewer than the entire library.With both "New Photos" and "Don't Import Suspected Duplicates" selected, Lightroom will find 5190 photos - just under half the entire library.The actual number of new photos is around 100.
As a test, I went ahead and imported one of the duplicated photos. The result was two identical images side by side in the library, both pointing at the same file (clicking "Show in Explorer" on each confirms this). The newly imported image has no develop history, although it still retains the develop settings from the xmp file.
I'm running Lightroom 3.5 on Windows 7 Home Premium. The catalog was originally created on a PC running Windows 7 Professional. I have successfully transferred the catalog previously with no issues and I'm not aware of having done anything differently this time.
Have noticed a strange behavior lately with LR 5 when I am making small adjustments in the Basic panel. The problem seems to happen when I am moving through the images too fast. If I make some adjustments to an image and then hit the arrow key to go to the next image, all of the previous adjustments are copied over. I typically use the Previous button for a lot of my editing but LR does this on it's own. I then need to Reset the photo to default and start over. Not a huge annoyance until it gets to the point where you need to re-edit some photos and it copies over everything. This happened several times to me today. I had an event fully edited but decided there were a few photos that needed minor adjustments. As I was quickly scrolling through making adjustments where needed, I would notice that LR would drastically change the settings to match the previous photo. This completely slowed me down and I had to re-edit so many photos. In some cases it would even copy over the cropping I had done. I hate to say but I am not very impressed with this version of LR so far. Feels rushed and not polished. I understand that each version has it quirks and issues but so many for an established program. Tempted to go back to 4. Slow and unusable healing brush and now this annoyance are two major hits for me.
Every time I rotate a layer, that layer is copied and then rotated. How do I just rotate a layer without making copies? i'm using CS5 with the latest updates.
I'm working on a PNG that's supposed to be tiled for use as a web background. It's an image of clouds, and since it's an organic form, I want to avoid it looking tiled, I'm editing the edges to make them blend together.
I've got 9 identical layers over a white background, and what I'm LIKE to do is have any change I make in one layer be reflected in all 9. Can that be done? It would come in pretty handy about now...
I'm having an issue with editing layers copied from one file to another in Photoshop CS. It seems to be essentially locking the layers and I can't figure out how to unlock them. I've tried duplicating them, renaming them, and resetting my tool preferences (I'm desparate and frustrated). They are in the same mode. This also tends to be an issue with opening a .jpg or .gif file and trying to edit it.
it seems the issue was my computer had the user permissions set for read/write only. Once I changed it so that all users had all permissions I was able to edit it.
I copied a 500x333 pixel image into a blank white document 1000x 700, but after I dragged the photo over it looked about a third as large. They are both 72 res. I don't get it.
when dragging CFX to copy it to other clip, CFX doubles everything within in cfx when copied from fx menue (all actions and clips) but fen copy from clip to clip behave normal.
I've been stuck on this for a while and im going through some blog posts at the moment to try and find some pointers but it cant hurt to ask here as well.
Im trying to obtain the handle/objectIDs from newly created objects made using the CO command or the copyclip pasteclip (ctrl+c, ctrl+v) command, imediately after they have be placed without the user having to click on them.
I have an image that I resized and that resulted in a gray checker board pattern above and below the original photo. I tried to add another photos above by copying and pasting it but get nothing I can see.
I tried merging visible layers but that did nothing (obviously since the copied photo is not visible).
Specifically I open the second photo, Select > All, Edit > Copy, went to the first image Edit > Paste resulting in a outline box of about the right size but without anything in it. I dragged this to the place I wanted it but I cannot get it to become visible. When I anchored the layer the outline box went away.
I have two layers but the second layer appears to be exactly like the first one.
I wanted to transform only selected part of image and instead all the layers and all the image was transformed by 1800 degree. How to do this what I want to do with the aid of free gimp?
I have a masked area in my illustration. When I copy & paste it into PS the mask doesn't work. It doesn't matter if i paste as pixel or smart object. Even in AI when I copy and paste it to another file the mask fails to work.
I'm working on CS6, OSX, I exported a logo to jpeg form Illustrator, when I open it on the default image preview app and try to copy (cmd+V) it won't let me, the copy option under edit isn't gereyed out but when I use it or press cmd+v a sound tells me the action can't be completed and it obviously doesn't copy to th clipboard, When saving it from the "save for web" option it works properly and I can copy and paste without problems, all of this also happens if I do it in Photoshop, this has never happened to me until now.
Its bounded box but its this box that takes up center of my image and it ruins the entire image.I don't know how to make it go away.I have unselected things anything in window that might be related but it still not working.I am using the creative cloud version of Illustrator on computer os window 7
I am used to copying filenames into the save as window ... it is more accurate and mroe efficient than typing them. When I upgraded to CS1 and CS3, I can not do this, either on Snow Leopard or on Win7. How do I regain the ability to do this?
Not sure if this is a bug, or has been previously reported, but using large thumbnails in the layers panel with copied shape layers. You can see that Shape 2 shows content, but the thumbs on the copies appear empty. Not life and death, but those thumbs are useful - when they work.
when I draw an object (let's say a line that's 10 inches long) and paste it into corel the size varies based on how much I'm zoomed in.
fwiw I'm using 'paste special' and using picture (metafile) this way I can keep the points. if I just paste as autocad I loose the points, and an arc might become a rectangle as far as points go...
I tried DWG and DXF and it's the same problem. metafile lets me keep the edges and such for nodes at least. I'm having the issue primarily with DesignCAD and AutoCAD
it's possible when i copy my assembly with rule in who suppress or unsuppress my component, the parameter part name change same to my new part name in new assembly??? Now when i copy or when i use design assistance the name of my part dont change in rule?
I'm using Autocad 2013 and have problems when I want to copy some text from Word file. I'm doing that because translating text, which is translated already in Word. I.e., I have a text written in English in Autocad and now I have to select it all, and paste text copied from Word. It changes color (now it's "by Block"), but I change it back to "by Layer; and changes it's style even if in Word it is the same style as in Autocad (it is Arial in Word and in Autocad, but when I paste copied text it is in Times New Roman.
Is there anything to set up not to change this text, because I have a lot of copy/pasteing to do and would save me a lot of time?
I have been having a problem with AutoCAD LT2010 for some time now, and cannot resolve the problem. When I create a drawing and label-up the entities with ‘Leader Lines’ they appear to be clear and crisp, but when I copy or move
the leader lines to a specific point, (i.e: end point of leader line to mid-point of another) they automatically turn to ‘BOLD’ yet the text font is still the same as originated. This is infuriating when trying to create presentation drawings.
"Can a color scheme be copied between non linked projects or does it have to have existed in the template view or be re-built in the new project view? I am surprised it can't be 'transferred' with other project standards, unless you can tell me different?"
I've created a small group of concrete reinforcing detail components that have graphic overrides to change solid black to solid grey. When I copy the objects or place new groups made from the objects, the graphic overrides reset to original all black.
Is there anyway to get the graphic overrides, which are embedded in the group, to copy into new intances of the group so that I don't have to "undo group" and apply new graphic overrides?
I am running Inventor 2008 and have recently created a few models. All of the models I have created have been linked to external spreadsheets at the part and assembly levels. Everything for a complete model is in a single folder, the spreadsheet and all parts, assemblies and drawings. With my previous models I was taking the entire folder and copying it to new locations to make slightly different models. When I would do this all the links of the copied parts were pathing to the copied spreadsheet, not the original, which is what I want. With my most recent model the copied parts are still pathing to the original spreadsheet.
P.S.: I tried to get around this by doing a pack and go and ended up with the same issue.