I am used to copying filenames into the save as window ... it is more accurate and mroe efficient than typing them. When I upgraded to CS1 and CS3, I can not do this, either on Snow Leopard or on Win7. How do I regain the ability to do this?
View 2 RepliesHaving a problem with Paste and Paste as Block in the right mouse click drop down window.
In the right Mouse click drop down window the Paste, Paste as Block and the Paste to Original Coordinates are grayed out.
The copy with Base Point works, as does the Ctrl+V and Ctrl+Shift+V and repeat Paste Block from the recent Input drop down selection. Why the paste commands are grayed out?
when I draw an object (let's say a line that's 10 inches long) and paste it into corel the size varies based on how much I'm zoomed in.
fwiw I'm using 'paste special' and using picture (metafile) this way I can keep the points. if I just paste as autocad I loose the points, and an arc might become a rectangle as far as points go...
I tried DWG and DXF and it's the same problem. metafile lets me keep the edges and such for nodes at least. I'm having the issue primarily with DesignCAD and AutoCAD
I have two images of the same size (e.g.800x600)
I select a region of the first image with any selection tool (e.g. the fuzzy select tool) I copy the selection.
Isn't there a way to paste the selection into the second image at exactly the same position where it was in the first image?
It seems to me unbelievable that there is no such option, but I can't ind it. I must be missing it. In Adobe flash it is called "paste in situ".
I've just updated to the latest version which I'm pleased to say resolves both the pdf arrow issue and the text issue I had.
Xara will not paste text copied from a table in powerpoint 2010. My workaround is to copy and paste the table text into a text box within powerpoint and then copy that text into Xara. However I do a lot of pasting from tables in powerpoint and obviously if i could copy direct (as I could from older versions of powerpoint) then my workflow time would half for this -
In most vector based programs I am used to using a function which allows you to paste a copied item to a specific location determined by a point-click. I find this endlessly more useful than pasting to the centre of the screen, or even paste in place, as both are rarely anywhere near where I would like an object to be. I find the function of point-click paste does away with endless dragging of objects across the screen.
CS6 13"MBP-2012-Mavericks
We have a few iMacs here all running 10.8.4 - we have PhotoShop CS 5.5 and all the artwork etc is saved on a shared server ( Windows 2008 r2) and we are forever getting these problems......
Only in photoshop we get the following error message......
"Could not save [filename] because the file is locked or you do not have the necessary access privilege. Use the 'Get info' command in the finder to unlock the file or change permissions on the file or enclosing folders"
For many years I have been edit photo montages in Premiere Pro. When I would find a photo that needs retouching so I would open Photoshop, retouch the pic, save it, and the new image would magically appear on the PPro timeline. But in my CS6 suite, I get the error message "Could not save "filename" because file is locked, you do not have necessary access permissions, or another program is using the file".
And this only happens when PPro is still open, regardless of where the CTI is on the timeline, or which pic on the timeline is selected. I never had this problem with any other versions of PPro and Photoshop. I don't want to shut down PPro everytime I need to retouch a pic.
I have recently purchased a new desktop under WIN 7 as well as Adobe Creative Suite CS6.My first internal hard disk is 2 TB, the second one installed is from my old PC, 250 GB.
I am getting this error when trying to save a file over an existing file using the “Save” command.The message is wrong, because the filename IS valid. This error is persistent.This error does not occur when doing the same action on my second internal hard disk.This error happens on files larger than about 1MB in weight.
What happens is that the original file over which I try to do the ”Save” command gets corrupted and lost.If I don't use the “Save as” command to save my work under a different name, my work is lost.The same problem occurs with both PS CS6 versions, 64 Bit and 32 Bit.
I'd like to change the filename of a part before it's first save.The code would look somewhat like below.
Private Sub m_appEvents_OnNewDocument( _ByVal DocumentObject As Inventor._Document, _ByVal BeforeOrAfter As Inventor.EventTimingEnum, _ByVal Context As Inventor.NameValueMap, _ByRef HandlingCode As Inventor.HandlingCodeEnum) _Handles m_appEvents.OnNewDocumentDim oDoc As Inventor.DocumentDim Name1 As String = "New Filename...."oDoc = DocumentObjectoDoc = oDocoDoc.PropertySets("Design Tracking Properties").Item("Part Number").Value = Name1oDoc.DisplayName = Name1oDoc.FullFileName = Name1.
The code partly works when opening a template but doesn;t work when create a an in place component or frame generated part? What do I need to modify to catch and change the filename before it's saved?
in Autocad 2012 whenever I want to make a PDF from a DWG I use the Autocad builtin DWG to PDF, but it wont suggest the filename anymore. When I use pdfcreator is will suggest the filename, but i dont have the correct paper sizes,
View 1 Replies View RelatedIs it me or is 'save for web' totally broken in Illustrator CS6, when saving a file with a space in the filename? First it says the file already exists (whether or not this is the case) and when I click 'replace' it just doesn't do anything. Tried with different files, even after relaunching Illustrator.
View 18 Replies View RelatedI am using Paintshop Pro X2. I've created a script that goes something like this.
1. Save original size as jpg in folder 1.
2. Resize 50%
3. Save as jpg in folder 2.
4. Resize 100x77
5. Save as jpg in folder 3.
6. Close file.
Everything works great except for one thing. During the save as operations the script remembers the original file names from when I record the script. Is it possible to replace that old static file name in the script with the file name of the current image?
I have just installed AutoCAD 2006 on a new PC, and for a while everything seemed fine. However when I save a drawing it comes up with the following:
Unable to save to drawing (path and filename).
Drawing saved to (path)savAE01.tmp
It allows me to saveas without a problem.
If I come out of AutoCAD and try to open the file I attempted to save, it is visible in the file list, but a message pops up saying:
Cannot find the specified drawing file. Please verify that the file exists.
I can rename the .tmp file to a .dwg file and it opens, but then if I try to qsave it, the same thing happens.
Whenever I want to save my DWG to PDF I use the builtin pc3 from Autodesk. Normally when I use it, the filename of the dwg is suggested as name for the pdf. But now this is empty and when you have to save 20-30 pdfs a day this is a pain to type over the names everytime. When I use PDFcreator however, it does suggest the name correct, but then I dont have the correct paper sizes.
View 2 Replies View RelatedI' only trying to create a logo for a project of mine.
This logo is composed by two things: the first one is the picture of the logo itself, than the second is the text part (which is not the hardest thing to do).
What I'm trying to do is, once have drown the "subject" (a light blue drop, in my case), to copy and paste it in order to have other four copies of the same drop, but moved and rotated to create something like a circle..
You can find the original logo I created attached. But I'm not really satisfied with it (this is also why I'm writing here!) =)
I'd like to re-create it and put the drops as in the attached logo....
how to write a lisp command, or function, that will save my newly created drawing with a file name is that is called up from a variable.
For example:
(setq filename variable)
(command "saveas" "r14" "filename")
and i would want the outcome to be: variable.dwg, rather than filename.dwg. I have tried numerous different ways of doing this with command prompt and cant seem to get anything to stick. Everything that works just creates a file named "filename.dwg", which is not what i want to do.
URL....I am using PSE 12 as a photo editor for Aperture 3.5.1 and the photo is duplicated (as a tiff) in Aperture and PSE editor opens with the image. When I close the file and say to save the file it brings up the save as window.
I tell PSE 12 to "on first save -- save over current file" it now brings up the "save as" window and won't save over the file (changes the file type from .tiff to .tif)
An application that will let me choose a group of Drawing files (.idw) and perform "Save Copy As" to a PDF format on them. The Filename of each Drawing should be extracted from a custom Parameter I embeded in the IDW file.
I know I can use the Task Manager with a virtual PDF Printer to create these files, but then the PDF Filename will equal the IDW Filename, and I want it to be derived from the custom parameter I prepared inside the drawings.
When using save copy as to make an identical part with a different number, the file name in the top and the browser doesn't update to the new filenumber. only in the bottom file tabs is the name correct. if I go to file> save as I can also see the new filename. This is a hassle when doing this to multiple files in an assembly, as it makes it hard to keep track of which parts have been given a new name. It seems the filename input in the browser is only written once, and that is when the first file was saved for the first time.
View 7 Replies View RelatedI'm trying to add some efficiencies to larger projects buy reducing the number of steps required to export to pdf. I'm looking to add a custom file name to the string.
DESIRED
From:
20131006_KK_Brochure_v1.pdf
To:
20131006_KK_Brochure_v1_OUTLINES_PRINT.pdf
However, I'm experiencing problems with the following code that I have modified. The below code is adding "_OUTLINES_PRINT" as a prefix, rather than a suffix.
function getTargetFile(docName, ext, destFolder) {
var newName = "_OUTLINES_PRINT";
if (docName.indexOf('.') < 0) {
newName = docName + ext;
[Code]....
How to save files with spaces insted of dashes in Save for Web dialog window in Illustrator CS6?
View 9 Replies View RelatedI'm trying to save an image I was able to "cutout" from one picture, then I want to paste that image onto a different photo. I'm learning about layers (slowly...) and I've watched several tutorials. Everything I've seen/heard makes it look easy, but I'm missing something. Been working on this for several evenings with no luck. Using Photoshop Elements 11.
View 3 Replies View RelatedThw "save as" window doesn't appear! I use PS CS6, what can I do?
View 5 Replies View Relatedall of a sudden everytime i try to "save as" a file the save as window pops up for a second then simply disappears and i cant click anything. the only thing i can do is shut down photoshop in the process list.
View 1 Replies View Relatedsaving files.
i try to "save as" a file the save as window pops up for a second then simply disappears and i cant click anything.
the only thing i can do is shut down photoshop in the process list.
i already tried removing and reinstaling but it didnt work
When I go to save the project I'm working on and click the Save As button, the Save Window does not open?
I am running the 30 Day Trial Version on Windows 7.
I connect my hard drive to compuuter, I open raw files in bridge load a file into ps, after which I would like to elaborate the new hard drive to save it, but it opens a window that says'' can not save the file because it was not granted write access.''
View 1 Replies View RelatedI have loaded about 10 pictures in the editor of elements 10. I want to save them to an sd card. When I try to do that it tries to save all of my pictures instead.
View 4 Replies View RelatedIf I take an image, and using the path tool, draw an area, then do a selection from path, cut/copy and paste as 'new image' then save the new image as a .bmp, .jpg etc, I am getting the whole original image instead of the cut an pasted portion. The full image does not show up as long as the drawing remains in .xcf (the background is a grey checkerboard). When saved as .jpg or .bmp the checkerboard is replaced by the original source image that it was cut from. This is Gimp 2.6.11 under Linux.
I have checked for extra layers, tried removing alpha channels, doing a 'copy visible' and re-pasting, merging of all layers all to no avail. It doesn't always happen either so there must be something, some setting or clicky box somewhere.
I am using AutoCAD 2008. When I want to "Save a drawing as" a different drawing, I used to be able to go to File - Save As, and a window would pop up, etc. Easy. Well, apparently one of my settings has been changed, because now when I go to File - Save As, AutoCAD wants me to use the command bar to save, which is much more complicated than the window. how to get the Save As window back?
View 2 Replies View Related