I am used to making a selection of part of the image - then you see the marching ants around your selection. Now in Photoshop at this stage I just press Ctrl-j and the selection gets put into its own layer above the current one. How do i do this in Gimp? and can you set up a keyboard shortcut for it?
View 12 RepliesI have the latest gimp.
View 1 Replies View RelatedI have a selection that I would like to promote to a layer. I feel that I have done this before but I cannot remember how.
View 1 Replies View RelatedI've come to GIMP from PS.
So, in PS if you make a selection and past it into a new layer it ends up in exactly the same position, however if I do the same on GIMP the selection is pasted at the top left hand corner. Then it's a major pain moving it to exactly the same place as the original
Most of my workflow is doing this sort of thing so it's real problem now.
I have a selection that I would like to promote to a layer.
View 1 Replies View RelatedI just tried GIMP and I want to ask about how can I make a layer into selection?For example in Photoshop, click the layer while holding down CTRL.
I have seen this [URL]....but no luck.
I was just starting to experiment with the gradient tool last week. I could have a circle as the selection, use the gradient, and then it would make the gradient within my circle all nice.But now whenever I try to use the tool, it fills my entire layer with the gradient instead.I know I still have the circle selected.
View 1 Replies View Relatedpasting new layers happens so often it's getting a bit redundant to always move my cursor over to the Layers panel, right-click and select New Layer (just the way I have been doing it) to get around the Floating Selection behaviour.
I'm wondering if there is a keyboard shorcut, or if I can change the default behaviour to automatically paste it as a new layer and not as a floating selection, or if there is some other trick people here like using to save time.
As stated I'm using Mac OSX (ML) with GIMP 2.8.3.
I want to move a layer or a selection in a straight line.
for example: I have a layer and only want to move it horizontally and NOT vertically.
Is it possible in GIMP? If yes, how?
I have been continually annoyed, when creating a vector mask-heavy document, with trying to select vector mask points by dragging a rectangle only to find that it instead selects a layer higher up which has a larger vector mask.
The only workaround is to manually select the points of my mask or to drag a rectangle from outside the canvas, meaning I have to zoom out or scroll to the edge - sometimes annoying if I am zoomed in quite far.
I know that the move tool can be set to automatically select a layer, depending on what part of the image is clicked, but why is there not an option to turn this off for vector editing?
Right after one makes a selection, say by using the Rectangle SelectTool, is presented with handles that allow altering the selection.
If one then selects another tool without deselecting is being deprivedof these handles while the selection remains active thus rendering himunable to alter the selection in that fashion.
Thus forming my question: is there a way to make these handles to(re-)appear on a non-freshly created selection?
I know how to blend selection edges of a selection in Gimp 2.8.2, but if I have only one side of a selection that needs blending, what should I do?
Lets say that I have a grey box on a black background and only want to blend the left vertical edge into the background.
Every time I make the second selection in a picture with the lazo the first selection disappear. what can I do to fix it?
View 8 Replies View RelatedIn PS i can Magic wand selection shape from one layer, drop to sub layer and copy that selected shape from that sub layer. How do I do this in illistrator, and moreover, from multiple layer at the same time.
For instance, in PS = Import an image of gold - select a text phrse with wand - drop to gold - copy paste = gold text.
I've been using Photoshop CS2 for several years to enhance my photographs, but just now have encountered something simple I cannot find out how to do. I have on the background layer a picture of a room interior with the exposure set mostly for the open window, but the rest of the room is very dark. On the only other layer, the upper one, I have the same shot exposed correctly for the room, which overexposes the window area. The upper and lower layers are perfectly superimposed, and the upper layer is at 100% opacity.
I have selected the window on the upper layer and want to change the selected area's opacity to blend properly with the window on the bottom layer without changing opacity of the rest of the layer. No matter what I do, changing opacity seems to affect only the entire layer, and I haven't figured out how to isolate the selected area for the opacity change.
I can cut the selection to reveal the darker window on the bottom layer, but this doesn't give me the flexibility I need to balance the two exposures. An opacity change would be ideal.
I have a GIF image that I need to add something to, but I don't want to add it to every single individual layer. Is there a way to add it over or behind the entire GIF so that it remains static while the GIF's frames cycle - like a watermark or something?
Or if not, is there maybe a script-fu that copies and merges a selected layer over every other individual layer automatically, without messing them up?
I know I'll probably have to just end up manually adding it to each layer, (so many layers...).
How do I make the edges of the top layer blend in with the bottom layer so you cannot tell that there is a line??? I want to make it look like a heart but I don't know how to smoothen the edges to make it look like it is part of the bottom layer so when I merge the layers there is no goofy lines looking like someone cropped another fire picture out...
fire3.xcf (Size: 489.68 KB / Downloads: 38)
I have two similar images where the subject has moved between the images. I have them in the same file as two separate layers and am using the subtract layer mode to identify where they differ, (roughly!).
I want to be able to use the subtract layer as a completely new layer so that I can make edits to it. The only way I have found to do this at the moment is to 'copy visible', but this still brings other elements that I don't want from where the layers overlap.
In a layerd PSD file when trying to move the content of a layer with a mouse upon clicking in the work space my selected layer becomes unselected and the layer that I have my mouse over becomes seleted and tries to move that layer instead. Trying to move the layer with up and down and left and right works fine. I also have PS5.1 and it works fine. This is quite frustrating. Don't see anything in preferences about layer selection.
View 2 Replies View RelatedFor the projects I'm working on, I use the same template beneath the different layer groups of each different project. When I move a "color" layer into the group, however, it doesn't show up like it's supposed to. It behaves as if the 'color' layer is a blank layer, and has no effect. Is there any way to get this to work or?...
ALSO: I can't open images by URL.
Why can't I align a single layer that is inside a layer group? The align tool would always select the top most layer group as the 'boundary' for alignment, thus automatically selecting the whole layers inside of it and align them as a group.
Is this a bug or just GIMP's weakness? It definitely reduces the layer group's usefulness.
Long time gimp user, but for basic tasks only. Now I would like to get my hands dirty a little more. I'm trying to setup a workflow that involves CAD, Inkscape and GIMP. Basically I did some architectural drawing in CAD, used Inkscape to clean up and convert DXG into SVG, so that I can use paths into GIMP. I did a script that for every path creates a new transparent layer with a layer mask using the path, so I can add fills and textures quickly. Now to the problem: say I want to add a texture from another image, i paste the image into the appropriate layer, then I want to transform the texture a bit (scale, rotate and perspective). the result is that the layer mask is transformed, too. I tried to disable the mask during transform, but didn't work.
Is there a way to workaround this? maybe some layer mode instead of layer mask?
I just downloaded GIMP 2.8 (on Windows 7) and was using the layer groups to organize a project I'm doing. I noticed that whenever I put the layers into the layer group, nothing I do to them actually affects the image (for example if I change the opacity of the layer, it doesn't actually change). If I drag them out of the layer group they function perfectly; sometimes if I edit them and then drag them into the group they also work fine.
As I was writing this post I tested dragging a layer set to "dodge" into the group and it didn't work. It kept the dodge setting, but it looked as if it was on normal; however, I drug another layer set on dodge into the group and it worked fine.
Is this feature just broken on Windows, or does it not work like I thought (where you can drag them in and edit them individually, or edit them all by editing the layer group itself)?
The issue:When I ctrl+alt+right-click to select a layer, I can click the actual layer, or about 6 to 10 pixels below the layer. This latter option (the 10 pixel margin thing) is rather annoying when there's a layer below it, that happens to stick out 10 pixels underneath that layer.
It basically requires me to set the higher layer to invisible, and then rightclick again.There's a slight difference between pixel layers and vector layers, as vector layers seem to have a bigger "hitbox" than pixel ones.
The most annoying instances are layers with, for example, a one pixel line. You pretty much have to *guess* where to click, as everything is so close to eachother.I work in webdesign, and am working with pixel-perfect designs all the time, so this is something I deal with on a daily (read: every few minutes) basis.
My version of Photoshop
- CS6, update it frequently on my home PC & Work PC
It's worth mentioning that I didn't have this issue before CS6, and have been using PS for about a decade, +- 30 to 50 hours a week!
Before you claim it's the computer, the systems I've noticed this on:
- My home PC (16gb ram, couple SSD's for scratch disks, GTX670, core7 etc)
- My work PC (16gb ram, no scratch disks or fancy gfx card, core7 as well)
- Girlfriend's MacBook pro
- Her Mountain Lion running desktop (custom build, hackintosh)
+ several other PC's at work (programmers running wildly different systems and OSes)
We have several Adobe subscriptions; I have one, my girlfriend has one and at work we have about 3 or 4.So, it's probably not the computers.
If I have one layer containing different kinds of objects in different colour, is there any way I can select all those of one color? For example, I have houses in magenta and roads in white but in the same layer. If I mark a house and use Select Similar the entire layer will get selected although I just want to select the houses. Can I do a selection based on the colour they have?
View 3 Replies View RelatedThe ability to have the layer toolbar show what layer an object is by selecting the object in model space has ceased to function. Not sure what I did. It's not specific to the drawing either as I've tested it in other drawings as well. It's a toggle somewhere in autocad. BTW Its on my 2006 version. I own 2012 but i'm an old dog that doesn't like to learn new tricks.I just noticed that the prelection ability within autocad is shut-off. For example you select a few object and then use the copy command. The copy command does not recognize the pre-selected objects anymore. Autocad now requires me to select the object from within the command itself.
View 2 Replies View RelatedHow would you take a layer mask, and make it its own layer? If you try copying and pasting a layer mask, you can only dock it to another layer.
View 1 Replies View Relatedhow to erase on one layer and have the other layer showing through. I believe I have Gimp 2.6. But I am not sure.
View 4 Replies View RelatedIn order to make a copy of a layer. I know I make a copy of the layer, but then I'm having issues taking the layer, and reversing it horizontally so that I can create a new layer using the previous copied layer. I don't know what I'm doing wrong, and I've been experimenting with it. I'm now able to create really nice and curvy looking hills, but still just not able to copy it, and reverse it.
View 2 Replies View RelatedI would like to know if there is a way I can transform a layer by manipulating the layer itself.
For instance, I can select Layer-->Transform-->ArbitraryRotation, and then use the mouse directly on the layer, giving me a "realtime" vies of the rotation.
Is there any way to do this with something like the "Scale Layer" function, so I could transform a layer directly, while seeing in realtime the difference the scaling makes?
I'm putting some images together and when I put one layer on top of the other, the bottom image bleeds thru. The top layer shows 100% opacity but still see thru it.
I've been working at removing the white background from the image and replacing it with an alpha channel. What can I do to make the top image solid?