I'm importing several hundred .png files to be played back as a gif and get this window popup several hundred times:
How do i go about disabling the message? it gets tedious "okaying" after just a few.
I'd like to create a script that checks the current document's color profile and checks it against a string, for example "sRGB IEC61966-2.1". My studio has a script that performs various functions to make sure that all the layers are visible/unlocked, checks for stray points, etc., and we'd like to add a check to the color profile because we handle a large number of files and this setting is overlooked a lot.
It's alright if this value isn't writable through script (we can just pop up an alert letting the user know that they need to change it), but I can't find where to actually read this setting! We're currently working on Macs and with JavaScript, but any nudge in the right direction.
I installed LR5 from LR4 yesterday and each time I open an image in CS5 from my LR5, I get the following message:
The document "IMG_9082.CR2"has an embedded color profile that does not match the current RGB working space.
Embedded: Adobe RGB (1998)
Working sRGB IEC61966-2.1
What would you like to do?
-Use the embedded profiel (instead of the working space)
-Convert documents's colors to the working space
-Discard the embedded profile (don't color manage)
My camera's settings have it set with sRGB, LR4 and LR5 have sRGB and I have CS5 workspace as sRGB. This did not happen before.
Is it possible that when LR5 updated the LR4 catalogue, it changed the profile of all my photos? I don't know, maybe I've done something, but I can't see what as I don't remember changing anything.
I created an image in gimp and flattened it before saving. I now want to edit some of the text in that image, but when I open in Gimp "As Layers" or just open it, it does not open in three different layers, like I had before flattening it. Am I doing something wrong. I saved it as a jpg file after flattening it.
View 3 Replies View RelatedI was quite surprised this image I found was an indexed color profile... when I was new (and dumb) to Gimp and images in general I used to save transparent gifs rather than transparent pngs... because I didn't know PNGs could be transparent but Gimp would warn me about that it would convert to indexed and I'd lose A LOT of color & clarity... none of my indexed images were very clear nor this colorful... how is it possible to obtain such color and clarity in an indexed color profile like in the image attached?
View 2 Replies View RelatedI'm trying to get my head around color profiles. I created a test image with the GIMP...
and then converted it to CMYK (ISO Coated V2 300% ICI) using [URL] (I checked that the color profile data survives the upload, so if you want to try it yourself, click on the image to get it full size and then download it)
Then I compare the two images side by side on the monitor using various viewer apps. Depending on the app that I use, the colors in the converted image either look the same as the original or darker and washed out:
1) SlowView and IrfanView display the colors as identical to the original.
2) Windows photo viewer, windows explorer and the GIMP display the colors as darker.
See screen capture below of the 2 different outputs ...
So maybe some viewer apps are not reading the embedded color profile. But which one is correct? CMYK is for printing and it has a smaller range of colors, but surely if the viewer app is doing things properly, it will read the embedded profile and convert teh pixels so that they will appear very similar to the original.
(In the GIMP settings I have Edit > Preferences > Color management > File settings = 'ask what to do', but it doesnt ask me when I open the image so I am suspicious that it may not be seeing the profile information).
when I select>>copy from one image and then Paste As Layer into a new image, parts of the copied selection change color. It's usually not a vast difference in color, but a definite change.
In the screen shot you'll see that I copied the "Learn More" link from the top image and pasted it as a layer into the 3 following background images. In the first two it pasted exact (a brownish color), in the 3rd it pasted as a drab green color. Why?The 3 images being pasted to are all Indexed images with the same channels and same opacity.
The next example screen shot may identify my issue...but this one REALLY Does my head in I selected the bear by color, copied, and pasted as a layer into each one of the background images shown in the first example/screen shot.Notice in the first, how the bear is pasted as the off brown color of the Learn More link.The Second is pasted as the drab green color i'm trying to fix in the first example.And the Third is pasted as the Black color I want, but its on the same image as the drab green Learn More link I can't seem to fix...
I have to treat a few images for a newspaper, and I have to apply an specified Color Profile for them.
what's the difference between the commands "Assign Color Profile", "Convert to Color Profile" or doing "Mode>CMYK, and then Assign Profile",
I am using AutoCAD Architecture 2010
Everytime I open a session of AutoCAD, I must select my profile.
Is there a setting that would retain my profile as current?
I exported a .arg file in the menu :'Options>Profiles' and I imported the '.arg' file back after I reinstalled the Autocad 2013. Then I selected the profile which I imported , and clicked the button 'SET CURRENT'
BUT It didn't work after I reopen the ACAD 2013. The current profile isn't the imported one still. I have tried again and again. How to 'set current' the profile I imported??
What I'd like to do is adjust the color and brightness/contrast of many layers of an animation. Now, for a still image with many layers I know you can generally add a partially transparent layer over the whole thing, however, since it's an animated .gif I have to do the same thing to each individual layer. I could probably go through and do it by hand and just get it over with. But, I'm curious if there's a feature for this, or is there a plugin that can repeat actions for multiple layers?
View 1 Replies View RelatedWhich registry Key stores the name of the Current profile ("cprofile")?
I tried following, all reurn 'nil'
(vl-registry-read "HKEY_CURRENT_USER\Software\Autodesk\AutoCADR18.1\ACAD-9005:409\Profiles")
(vl-registry-read
"HKEY_CURRENT_USER\Software\Autodesk\AutoCADR18.1\ACAD-9005:409\Profiles\(default)")
In the registry when I double-click the key, the value is displayed. But I can't access it.
I've been trying to reproduce this color blind conditionfor a long time now and I still didn't figure out how I can do this. I've searched for cluts but didn't find any, only this, which has some previews of them, but no any files I can load into Photoshop's Color Lookup adjustment. I've looked into Pixel Bender plugin, but I'm using CC so that doesn't work either... I've also tried it with the Index Color mode, but that really messes up my image as it has a really low color range (256). I've even tried reproducing the same effect with adjustments, channels, etc, but didn't figure it out.
Since there's a way to perfectly color proof images with this condition, I'm guessing this has to be some kind of ICC profile or something similar. Is there a way I can use it as a color profile?
Turn on/off layers in the current viewport only, I’m wondering if there is a command that can be plugged on the “quick access toolbar” by which one can turn on/off layers in the current viewport only.
The available command to do so is “Freeze and thaw in current viewport” (attached) and it sounds it can’t be plugged in the “quick access toolbar”!
Is there a way to plug the command “Freeze and thaw in current viewport” in the “quick access toolbar” (attached)?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I have a drawing with several views I've saved using the View Manager. Since creating the views, I have created some new layers. Now when I use View Manager to set an existing model space view current, the new layers are set to frozen. When I created the views, I un-checked the 'Save layer snapshot with view' checkbox.
I can thaw the new layers, then use the 'Update layers' button to correct this, but it's a hassle. Why is it freezig layers created after the view was created?
How can I disable the "the current layer will be off" popup when hiding layers? I found this:
[URL]
but I'm afraid the expert command is only valid for commands
I'm trying to figure out a way to automate a simple, yet repetative process I do countless times a day. Ideally, I'd like to tie it to a keystroke to speed up my workflow.
I work on line art and colorways for footwear, so the way I'm coloring these shapes and strokes break apart the different materials and pieces of the shoe.
While coloring line art, I work with Pantone spot colors as fills for closed path objects. I then have to manually apply that same color to the stroke, set the stroke to 0.5px weight, convert that spot stroke color to CMYK, and add 15% to the K value.
I found some code in an older post for applying the actively selected object's fill color to the stroke, but I'm having but I'm having trouble with the next step of figuring out how to take that spot stroke color and convert it to a CMYK build that I can then add 15% black to. Is this something that's even possible? I've spent about an hour playing with the script and have only had luck matching the fill color or turning the stroke white.
Is there a quick command that lists all current frozen layers in your drawing? I am using Autocad 2012. We recently switched from 2006 in which the quick command YT would show all frozen layers and allow you the option to thaw them. We were using ArchT so Im not sure if that was something associated with that.
View 1 Replies View RelatedWhen I hold Shift with the lasso tool, it doesn't add to current selection.
View 4 Replies View RelatedCreate a Group, set it to Blend Mode Normal, with an empty Layer inside the Group selected and the Eyedropper Tool set toCurrent & Below try to pick a color from a Layer underneath. I can’t pick up a color from there then.
View 3 Replies View RelatedI don't want a shade of the current color. I need a totally different color.
View 2 Replies View Relatedsince my new pc Civil 3D does not open with my profile that i have created when i still had my older pc , i used that profile for quite some time in civil 3D on my previous pc , but with my new pc i have to open Civil 3D and load my profile manually every time i open the program.
i have found a solution where you can add the profile saved path in the short cut which you use to open the program with.
i have tried that but i get an error saying i don't have admin rights.
which is very strange cause i have full rights on my machine and the IT guy has confirmed that.
Watch the following animation to see that a new shape created by first drawing a path then hitting the [Shape] button is not creating a shape of the current Foreground color, but rather apparently of the color of the shape layer below it. This seems odd to me:
I don't think it's document-specific, but just to leave nothing to chance, if you want to try to reproduce it, you can download a copy of the file: [URL] ......
I want to convert an image from it's current resolution of about 72 pixels per inch to 600 dpi. How is that done? This project is for a corporation seal which measures 1.5 inches per side. The stamp maker needs a .jpg at 600 dpi.
View 14 Replies View RelatedI'am trying to create profile from opening.I have found interesting method : Profile.CreateFromProfile.But every time i call this method "eInvalidInput" exception is thrown.
I am trying to call method like that:
Profile.CreateFromEntity(entity, Matrix3d.Identity);
I'm exporting Tiff Prophoto files from Lightroom into PSPX4 for further processing. The images are 1 to 2 stops under exposed when compared to Lightroom's image.I have selected PSPX4 color profile to match LR export color space.
I have tried exporting the Tiffs as sRGB and adode1998 and still the images are under exposed. I have little knowledge about color management and have searched around the web for possible answers, but no luck.
I do not recall making any changes to current settings and I'm not even sure how to do that.All my new detail lines are green. I have to change them back to black using overides.
Does this signify something? How do I change the current color back to black?
I am trying to drag and drop a photo into my current project and it is coming in far too large - i try to re-size and it disappears
View 2 Replies View RelatedI need to process multiple photos every day in the same way and am trying to minimize the effort needed by automating Gimp with Scrip-fu, which seems to be kind of limited. My plan was to save the files in specified folders and using incron (an inotify service) to open them in Gimp; do a manual perspective backward transformation by hand and start a script would, resize them and based on their filename and what directory they came from, save them to the correct folders for display on web pages.
I'm having difficulty figuring out how to get the filename and directory which the images came from.
I'm trying to get a script to use a fill foreground I've selected. I can get it ask me to select the foreground color but it always saves the foreground color used when I save the script. I can't figure out how to get it to use the current foreground color.
View 3 Replies View RelatedWhen calling the Camera.SaveAsBitmap method and specifying a background color, should it reset the background color of the current view? Calling it in 2014 does this.
Also is there a way to apply the camera settings without changing the current view? I want to change the camera settings but just save the images to a file?
Inventor Addins
FlowTools for Inventor
ilxButton Panel (Buttons for iLogic Rules)
