I want to convert an image from it's current resolution of about 72 pixels per inch to 600 dpi. How is that done? This project is for a corporation seal which measures 1.5 inches per side. The stamp maker needs a .jpg at 600 dpi.
View 14 RepliesI am a Photoshop newbie and I have a series of graphics (all 72dpi from a website) that I would like to print in 300dpi. Is it possible to take a 72dpi .jpeg or .gif file and easily convert it to a higher resolution printable graphic? If Photoshop can't do it, is there any type of program that can?
View 1 Replies View RelatedSo I am making digital color prints at 24x30. the photography work is about color fields and gradients, so I need super high res files. I have set the size to 24000x30000 pix at 1000 dpi..now my problem, when i go to save the gimp file as a jpeg i get this error message "JPEG image plug-in could not save image"
View 3 Replies View RelatedI need to process multiple photos every day in the same way and am trying to minimize the effort needed by automating Gimp with Scrip-fu, which seems to be kind of limited. My plan was to save the files in specified folders and using incron (an inotify service) to open them in Gimp; do a manual perspective backward transformation by hand and start a script would, resize them and based on their filename and what directory they came from, save them to the correct folders for display on web pages.
I'm having difficulty figuring out how to get the filename and directory which the images came from.
I am opening some 300 dpi photographs, but when I go to the "scale image" dialog box in Gimp, the image resolution is listed by default as 72dpi !!
But the pictures were shot in high-res, and when you look at the file properties or open the image in Photoshop, they all confirm that it is a 300 dpi picture. Only Gimp is presenting it as 72dpi. It happens that the photographs are bw, but the color mode is RGB, not grey scale.
How I can stop Gimp down sampling the images automatically if that's what is happening?
I have a Tiff image ( size : 5.3 mb). Wanted to export into jpg with a lower resolution. I waited for the process 35 mins and then had to cancel it. and when i checked the preference inside GIMP it looked like the attached image file.
View 1 Replies View RelatedMake a current, parent image, pattern step and repeat at an exact distance from the parent.
I have a parent image 4.75"long X 2.00" high image I want the pattern repeated in the Y direction every 2.10" or with a .10" space between the images, to create a 1XN array or tiles or pattern?
I then want to print the new tiled, array image to the exact size.
How to convert an image into a Japanese Manga Comic style image using Gimp? I want to turn a few pictures into pictures like this picture that is attached.
View 3 Replies View RelatedI have been trying to save an image at 1200 dpi. The image turns solid black.
I had this problem once before (months ago). I know it has something to do with the Resource Consumption settings (i.e. Edit -> Preferences -> Environment - > Resource Consumption).
I got it figured out before but I reloaded Gimp on my computer so the settings went back to default. It has something to do with increasing the cache size or the total new image size or something. I can't remember.
I'm trying to create a high resolution version of a low resolution texture used in a game. I've found a pattern that I think is acceptable, from a real image.Now the question is this: how can I colorize the large image to that it is as resemblant as possible to the original one? I've tryed a simple colorize, but the result is not so good...
Original texture:
[URL]
The image to be colorized:
[URL]
How to convert a PDF image to PNG in command line using Gimp?
View 1 Replies View RelatedHow do you get an image from GIMP to Scribus?
I'm using GIMP 2.6.0 and Scribus 1.3.4
I need to convert to CMYK and do color seperations for print.
I am having a Tiff image in RGB which needs to be converted to CMYK. How do I do it? Without loosing the dpi.
Also my publisher is complaining that the image has an alpha channel and has to be removed. How do I do both these ?
I want to create a theme for a nokia phone with a 65000 color display. I cannot find a way to limit the images to 65000 colors. The maximum amount I can select is 256 by converting the image to an indexed display.
View 4 Replies View RelatedI realize the nature of my question maybe asking the impossible, but I have a low res image I downloaded from the internet, placed in an InDesign page, blew it up and printed it out. I was going for the distressed look that it has, it looks ok when I print it out considering it's low res and I blew it up fairly large. However, it's a little too pixelated to look professional when printed. Are they any tricks or things I can do to make it look higher res for print. I've attached the image as well as a screenshot of the InDesign file so you can see it in context.
View 4 Replies View RelatedI have been doing this 1 by 1 for the first 100 photos and I now have a headache. I am doing this 1 by 1, anyway that I can do this way more easier? I am just converting from high to low res. Image size, changing "Bicubic Sharper" to "convert to profile" "sRGB IEC61966-2.1" then to "8RGB".
View 1 Replies View RelatedI have created a bunch of DVD menus in Photoshop CS4 using PAL DV Widscreen.
View 3 Replies View RelatedI'm trying to convert Excel graphs into high resolution tiffs. I am saving the graph as an .eps file and opening it in Photoshop. This worked for a few graphs, then all of a sudden Photoshop started opening the .eps file such that it was shifted and only part of the image was showing up (the rest cannot be seen and is just cut off).
View 3 Replies View RelatedWhen I hold Shift with the lasso tool, it doesn't add to current selection.
View 4 Replies View RelatedI want to generate a single image which compares two different images side by side. Can Gimp do this?
There was a tab called "new" which enabled me to generate the white background needed to do the merging. One of those little details the author forgot to mention. They just said " Open the first image as a new layer and move it to the left" without mentioning that you had to find the "new" key and put in the white background first!
I am trying to drag and drop a photo into my current project and it is coming in far too large - i try to re-size and it disappears
View 2 Replies View RelatedI'm importing several hundred .png files to be played back as a gif and get this window popup several hundred times:
How do i go about disabling the message? it gets tedious "okaying" after just a few.
1. Is there a "show quick mask" feature for showing masks?
I know Gimp has a "*Show quick mask*" feature which shows what you have(and haven't) selected by displaying a red overlay over your image,allowing you to add to or subtract from a selection by using the paintbrush, but I haven't found a similar feature for showing masks.
Photoshop has this feature (it's called 'reveal mask' I think) and it basically just shows a red overlay of your mask on your image so that,similar to the quick mask feature in Gimp, you can see where you have and haven't masked through.
(I don't own Photoshop so I'm not sure if the red overlay shows the opacity with which you've masked through or whether or not you can edit the mask when it's being shown as a red overlay.)
2. Is there a command for showing the layer underneath the current layer I'm working on?
This is another feature that I've seen Photoshop has that is useful for blending multiple exposures (and lots of things, really).
Basically it's just a keyboard shortcut for showing the layer underneath your current when you hold down a certain keyboard command (it's not something you toggle since it's meant for quickly viewing what's on the layer underneath your current one).
I know I can press space bar to show or hide the layer I'm currently working on, but I can't do that unless I focus into the layers dialogue first. It'd be nice if I could activate that functionality from anywhere,regardless of whether I'm focused on the layers dialogue.
Do either of these features exist in Gimp?
how can i know if the current view/display is align with the current ucs?
let's say i have rotate the ucs about z axis 45 degrees and make it plan now i draw some things and then i change back to world
worlducs = 1
viewdir = 0,0,1
ucsxdir = 1,0,0
ucsydir = 0,1,0
but the display is still in the ucs z 45 (ucsfollow = 0) set the view to PLAN current (now the view is aligned) but the system vars does not change.
For a plan UCS, you would need to compare the VIEWDIR system variable and the cross product of the UCSXDIR and UCSYDIR system varaibles.
[URL]
Is there a macro/script/deisel that will automatically print a pdf (cute pdf autocad lt 2007) to current plot settings in current drawing directory and give it the current drawing view name and number? Disk space not a problem these days and would save time to have a pdf copy of all drawing tabs readily stored in the directory ready for issue.
View 3 Replies View RelatedTechnique that can check the current plotter name for the current tab and assign it to a variable? i.e. can it be assigned to a variable to check if if equals "myplotter1". The next step - is there a technique to change the plotter name to "myplotter2.pc3".
I have partially done the latter part of this in the past using the -plot command line to ASSIGN a new plotter but I would really like to only run the routine if it really needs to.
I have 1 Next button that is used on the timeline. Each position has a pause then a play so there is only 1 button. I need to get the label info so I know where I am so I can save the location of the timeline that the user was at if they exited before they finished the process.
View 6 Replies View RelatedIf I open a jpg with a 72.000 dpi image in Gimp, remove background and save as a transparent png, the next time I open the transparent png in Gimp the dpi is 72.009! and if the jpg has a dpi of 150 it becomes 150.012 dpi in the png when I next open in in Gimp!
why is Gimp slightly changing the dpi resolution in my png files?
I have the filmstrip set to auto hide/show. As I browse through my library, I'll pick an image to work on in Develop. I may then want to work on an adjacent image. Instead of going back to the library to select it, I want to hover over the film strip and select the image that is 1 or 2 away from the current one.
When I first hover over the filmstrip, it shows my current location but then quickly slides to a different part of the strip. Usually no where near where I'm working. I haven't been able to determine a pattern. Sometimes it will go to the beginning, sometimes the end. Sometimes to an image I was working on the last time I closed Lightroom (if I am still in that folder).
I need the filmstrip to follow me as I move through a set of images.I don't remember having this problem in 3.x
How do I scale without losing resolution? I'd like to make the image smaller without it becoming blurry
View 3 Replies View RelatedI understand there's a plugin that can increase the quality of a low resolution JPG, smoothing out the pixel effect. which one it is, if it exists?
View 3 Replies View Related