I want to create a theme for a nokia phone with a 65000 color display. I cannot find a way to limit the images to 65000 colors. The maximum amount I can select is 256 by converting the image to an indexed display.
View 4 RepliesI'm currently working on a User Interface for a Wall Panel, but this Wall Panel has only 16bit (65.000) colors, i've tried a lot of different things but can't find a way to get smooth gradients, my images always have gradient banding.
I was wondering if there is a way to tell photoshop to work in 16bit mode ? (not 16bit by channel) so that the colors selected for the gradients would always be contained in the 65.000 available colors.
For the moment, the only way to get a 16bit image is when saving a file as a bitmap and selecting 16bit. But everytime i do this, gradient banding immediatly appear. Maybe photoshop bitmap encoder is just not that good for 16 bit mode bitmaps .
I have recently traced a new picture and I am about to add colors to it so that I can upload it later on my gallery. I started the Tracing on a Cmyk based template because one day I will use print it to add it to my portfolio! I mean should I add Cmyk colors and them convert them to rgb in order to upload it?
View 7 Replies View RelatedHow to convert an image into a Japanese Manga Comic style image using Gimp? I want to turn a few pictures into pictures like this picture that is attached.
View 3 Replies View RelatedI have a blank "shield" image:
and I want to color this image with the the upper crown-like part yellow, the left-half blue and the other half red, just like this one.
Is there a way to view all the colors in an image at once in GIMP? If not is there a place I can suggest it?
View 1 Replies View RelatedI am doing a head start in GIMP. That means i am pretty new to GIMP. I have a bunch of tasks to do.
At the moment - i have a special task. i have a image that has got some arrows - i want to extract the colors (that are the exact colors of all the arrows.) After this i want to draw in a new image a bunch of balls - exactly with these colors. Is this doable!?
´
Question: how do i do extract the exact colors - can i get the exact color scheme - some hexa-code or how would you do that!?
Attached File(s) pfeile_ausschnitt_.jpg (40.75K)
Number of downloads: 3
crazy_balls_only.jpg (67.61K)
Number of downloads: 3
I am having trouble making a gradient image. I know the two colors I need, but the gradient isn't working for me.
View 4 Replies View RelatedI'm designing a banner for my gaming guild's forums. I have draw the logo/banner and textured it. After Desaturating the image im left with a nice B&W image.
I know of many ways to color the image but everytime that I do the color doesn't match the other colors we have on the forums.
What I want to do is color the image according to a color gradient that we use on the forums.
I would like to have the whitest pixels of the banner be the lightest color from the gradient(#c0a864) and the darkest pixels of the banner be the darkest color from the gradient(#917341). And have GIMP interpolate between those two colors for the other pixels in between the lighest/darkest.
Similar to how a Bumpmap works, only instead of simulating depth based on the range of colors from Black to White, I want it to colorize the banner.
This appears to be colored by crayon, how to I make the colors in this picture more solid so it doesn't have coloring gaps in it?
View 1 Replies View Relatedis there a way to take an image opened in Gimp and display the palette of colors in the image or convert the image itself into a palette of colors that are in the image?
View 3 Replies View RelatedSituation Basically I have a series of 8-bit bitmap images which all use different palettes but have around 64 colors in common.
This will allow them to be combined with another graphic which uses only those 64 colors in a 3D engine, thereby allowing that graphic to be used with the images with no color misassignments.
I need to be able to set those 64 colors to the same position in the colormap for each image. I could just limit the images to 192 colors, but the loss of information is unacceptable to me.
The task I'd like to manually drag those specific colors to the bottom of the colormap in a set order, but the "Rearrange Colormap" dialogue does not show me what their RGB values are, so there is too much room for error. (Tried in Gimp-2.6 and 2.8)
Any way to change what colors make up an image. I have a palette of 400+ colors that I'd like the image to be composed of but I can't find a way to convert it to only use those colors. Changing the mode to indexed mode doesn't work since you can only index 256 max colors.
Is there any plug-ins or tools I am missing that can do this? (Basically it will change every pixel in the image to the closest matching pixel from a large [400+ color] palette.
So I am creating this website, and my customer wants a header banner similar to this:
(I don't know if it's clear enough, but there are multiple lines going through the image, with different gradient colors and so on)
Now I can't use this image, since it belongs to another website, but I want to make my own. So, I have no clue about how to make these lines in GIMP. I know GIMP's interface very well (been cropping, coloring for years), but not advanced features like this.
And it's not only the lines, but also the shadowing/coloring in between the lines that I seriously have no clue about how to make.
What is the tool called used for making this? Is there a video tutorial on how to make something similar?
i play around with a gimp-image. i want to "ERASE" the text in the balls.
Well i guess that this is a bit tricky - since the background of the circles/balls is somewhat different and has sometimes multiple "(!!!) background-colors. So if we try to get the original - color of the circles then this is somewhat tricky.
How to convert a PDF image to PNG in command line using Gimp?
View 1 Replies View RelatedI am working on tiny comic-strip frames that are being drawn as seperate images and when it comes to colouring, there is a time-consuming snag where I forget the exact colours of the finished frames which I need to keep checking and seeing earlier single images in order to compare and then reproduce the colours accurately in a consistent sequence.
Believe it or not, I get around this problem by taking digital still camera shots direct off the screen and consulting them afterwards! This does work, but it's hardly practical------is there an easier way to repeat the exact same colors on a separate image, without having to constantly refer to pre-existing images within GIMP? If I can reproduce the exact colours on different images automatically without having to recheck earlier images, this would save me a lot of time!
[Ideally, does every shade of colour have a code number or similar method I can enter and it will come up again accurately? This way, I could write down the shade number and repeat it exactly later on a new image where the exact same colour is required.]
The sheer number of shades of colour and tones make it very difficult to remember the exact colours accurately.
I have been trying (without much success) to figure out a way to change all non-white color elements on a picture to a single set color, and was wondering if that is possible to do in GIMP.
For example, I'd like to turn something like this tri-color Italian flag. To this, where the blue color is a color of my choosing.
I created a new palette in gimp using my original RGB image (containing shades of yellow and black) which gave me about ~200 colors (with interval=2 in Import dialog). Then I changed the mode from RGB to Indexed using the palette I created above, but the resulting image contains only 2 colors - black and yellow. All the dark-greys, light-greys and different yellows are absent.
I want my indexed image to resemble the RGB as much as possible but the result looks disastrous.
Visual illustration of my problem : [URL].......
So I am trying to work with a web page template in dreamweaver. I am attempting to open the background image in this template with gimp, then paste over top of the Original image with a new image. Every time I paste the new image in it takes the color style of the original.
I.E. The original image is in shades of brown while the new image is in many different colors. Whenever I paste the new image (the image with many colors) it changes to shades of brown like the original image.
The same thing happens if I open the new image as a new layer or just simply copy and paste the new image in.
How do I bring the new image in without it changing colors?
I have two layers: a background in yellow and a cropped image in the other layer. Now I want to dissolve the cropped image in the background, how can i do that automatically? I know I have the smudge tool, but the results are not so good for me...
[URL]
2.8.2
I have two layers: a background in yellow and a cropped image in the other layer. Now I want to dissolve the cropped image in the background, how can i do that automatically? I know I have the smudge tool, but the results are not so good for me...
[URL] .......
2.8.2
I'm using gimp 2.6 on ubuntu. i have some pictures i would like to enhance.
There's that image image 1
and i would like to make it look like image 2
As you can see the second image uses only about 7 or 8 different colors and the outer lines are nice and smooth not stuttering.
Is there a way how i can change the first image to something like the second one, maybe something like replace 10 different colors which are similar to each other with only 1?
I tried and played with the options (bucketfill, posterise, or the cartoon option from artistic menu, increase contrast, brightness etc...
Is there an option to smoth the outer lines etc? i just want the dog, the rest of the background is not so important.
I want to convert an image from it's current resolution of about 72 pixels per inch to 600 dpi. How is that done? This project is for a corporation seal which measures 1.5 inches per side. The stamp maker needs a .jpg at 600 dpi.
View 14 Replies View RelatedHow do you get an image from GIMP to Scribus?
I'm using GIMP 2.6.0 and Scribus 1.3.4
I need to convert to CMYK and do color seperations for print.
I am having a Tiff image in RGB which needs to be converted to CMYK. How do I do it? Without loosing the dpi.
Also my publisher is complaining that the image has an alpha channel and has to be removed. How do I do both these ?
I want to generate a single image which compares two different images side by side. Can Gimp do this?
There was a tab called "new" which enabled me to generate the white background needed to do the merging. One of those little details the author forgot to mention. They just said " Open the first image as a new layer and move it to the left" without mentioning that you had to find the "new" key and put in the white background first!
I would like to change a picture with many colors into a picture using only 2 colors (of the color picker for instance). I nearly found what I was looking for with the halftone pattern filter but I don't want the pattern in the final result.
View 6 Replies View RelatedI have a logo - blue and green colors, good for a white background. BUT, I want to place the logo on a dark green background.
SO, I want to convert all of the clors in the logo to White, but I don't know the best way to go about it. I tried using the paint bucket tool, but all of the shapes and letters have jagged edges with varying shades that are visible when zoomed in (dithered?), and the results I get when using the paint bucket aren't ideal.
I always find beautiful RGB-vectors which I want to use for a print design. But once converted via Illustrator to CMYK, the image often annoys me because of the less bright and powerful colours.
So: what is the best way to recolor a nice and colourful vector from RGB tot CMYK (possibly with finding the right alternative colors in CMYK?) in Illustrator?
I've been having this issue with InDesign CC lately, its importing some of my pantone colors as LAB colors. I am able to change a spot to process, but as far as changing the LAB color to a CMYK color, the box is grayed out and is not giving me an option to do it. See screenshot: [URL]....
View 3 Replies View Related