I have been trying (without much success) to figure out a way to change all non-white color elements on a picture to a single set color, and was wondering if that is possible to do in GIMP.
For example, I'd like to turn something like this tri-color Italian flag. To this, where the blue color is a color of my choosing.
I made an image that has only two colors (not grayscale) only true black and true white. I want to know how to change these colors independently to whatever color. Basically what I did to this image was throw it in MS Paint and converted it to black and white.
How would I change these colors?
Any way to change what colors make up an image. I have a palette of 400+ colors that I'd like the image to be composed of but I can't find a way to convert it to only use those colors. Changing the mode to indexed mode doesn't work since you can only index 256 max colors.
Is there any plug-ins or tools I am missing that can do this? (Basically it will change every pixel in the image to the closest matching pixel from a large [400+ color] palette.
How to change black and white hand-prints into color for some art work for my kids. I am already able to switch between black and white between the foreground and background, but not able to change all of the black "color" to a different color including all the minor lines on the hand and foot prints.
View 6 Replies View RelatedI want to select a specific color from within the image, and change all similar colors within that image to a different color. In other words, after using the Color Picker Tool to select a color from the image, I want to take the selected color (and everything in the image that is equal to or similar in color), and change them all to a different color.
I tried using the Path's Tool to create an outline in the image, and changing colors that way, but it changes all the other colors in the selection I don't want to change. I just want to change all colors in the image/selection that are equal to or similar to the selected color. How do I do this?
I have an image that is black and white, and I want to color parts of it with a brush. However, when I try to change the color, it won't change -- it just changes to a different shade of grey! What can I do?
View 2 Replies View Relatedwhat I want is for a single image that has a white background to be changed into an image with a transparent background. Just the white background, not the things in the image. (I mean like when the image is in a word document that has a black background, the image will only show the person inside it and the white background of the image can not be seen.) Is there a way I can do this on GIMP?
View 3 Replies View RelatedI am currently trying to combine a color photo frame with a black and white image, but every time I open the frame in "open as layers" the frame turns to black and white as well as the photo. I have no problem when using color photos. Is there a way that I can do this so that my photo frame remains it's original color with the black and white photo inside.
View 1 Replies View RelatedI discovered GIMP 2 days ago and I am pretty excited to get started with it. The only problem is that I am a total newbie. I would really like to change the color of this image from black to blue but how to do so and the tutorials that I have found online don't really apply to what I am trying to accomplish.
View 3 Replies View RelatedOK I have a PNG image, black and white. I want to change it to navy and white, IOW sub 0033 for black wherever it is.
Only one prob: some of the squares are SHADES of black, and I want to sub navy for black in EVERY pixel it inhabits, however pale.
How can I do this without trying to identify and translate every shade represented? Does a filter exist for this?
Is there a way to search and replace using masks for HTML color codes or some such (don't even know how color codes work)?
For a person’s signature, I used the paint brush tool to make small changes to a text font and then saved the image with a transparent background in .xcf file. How do I now change the color of this image from black to another color?
View 3 Replies View RelatedOkay so I'm trying to take the white background off of a picture using the select a color on white, but it takes out a lot or the fur and eyes(it's a picture of a cartoon cat) How can I remove the areas of can from the selection without removing the pieces of cat too.
It's creative commons, so I guess I can post screen shots...
The cat is from [URL]...
A general idea of the selected area
What happens when I take out the selected area
So how can I take the pieces of the cat out of the selected area so when I try to delete the background I don't get an invisible cat?
I created a logo and then opened it as a layer so that I can make a website header image. It is shown here [URL] and as you can see the background is an off-white colour. It is probably unnoticeable to many, but I would prefer to get it right. How can I make the background a pure white so that it blends in with the white of the wordpress theme?
View 3 Replies View RelatedI am taking photo's of jewellery on a white background which shows as anything on a color scale from light blue through to grey. How can I make all my background colors the same shade of white.
View 4 Replies View RelatedIs there a way to change a range of colors to another. Let say I want to change a pic with different shades of red to blue. Which tool would do the trick?
View 1 Replies View RelatedI have a picture that I like to change the colors on. I have attached the picture. I used the tool select by color which seemed to work but then the instructions I have found said to use the Color Exchange tool but that does not work.
[URL]..........
If you open the picture and see it u see 3 dragon heads, one white, one blue and one red.
what I am trying to do is make the centre orange and let those 3 colors blend into orange.
that's why the topic name '3 colors into 1 different color'.
I tried things with the circular flashlight effect (dont know the name of the effect)
but the goal is that only the colors change and NOT the background.
I am using the paintbrushes and all I can get is black. How to you change the colors on the Paintbrushes? I have clicked on the "Color Options" in the Paintbrush toolbox but nothing happens.
View 14 Replies View RelatedI have a 2013 Macbook Pro 15 with discrete graphics and plenty of RAM, so I cannot image the computer is to blame. I have 2.8.10. When using features like auto white balance it takes way too long to change the pixel colors. I have installed GIMP in parallels and it runs faster through the Windows application than it does directly on my Mac. Is this just the result of the mac build being not as refined? Is there a setting that I need to change? I have the Tile Cache on 8GB and number of processors on 8 (4 actual, 4 virtual).
View 4 Replies View RelatedFor example, if I would like to change the default green and purple color labels to orange and pink?
View 2 Replies View RelatedI draw images by hand and then scan them and digitally color them.
The white of the page is not a solid white, but full of variance.Also, there are many tiny specs of dust and things that show up as grey specs on the image.
Prepping a black-and-white line drawing is easy; I just use color curves to set the mostly-white areas to pure white, doing the same with black, and tweaking the curve how I want to make my black lines sharper or smoother and cutting out those grey specs.
But I've been trying to work out how to add a second level of detail in these drawings. This comes in the form of a light blue. This light blue can be used for so many great things, like points to line up an image that was drawn on multiple sheets or to represent lines that will becomes shadows or highlights that I don't want to show up in the final image.
Previously I had been scanning my pages as greyscale images to completely wipe out extra color variations that I didn't want. If I do that with the blue lines they turn grey and they get eroded when I adjust the color curves. If I scan it as full color I now have subtle color variants that throw things off, and adjusting the color curves still erodes those blue lines even worse.
If I try adjusting the color curves by color channel I turn the whole image to a particular tint.
How can I adjust the colors of an image to turn anything mostly white into white, mostly black into black, and mostly light blue into light blue; and preferably be able to adjust the scale it does this by so that I might prevent dust from becoming black spots and even maintain the greyscale range at the very edges of my lines?
I don't understand how you can know which colors to use when applying "Alpha to Color".
Here are a few images I have and what I've done so far:
Here are my original images
I've downloaded a block (the orange one in the picture) and I want to change its color to white. I selected the blocks and change its layer to my BLOCK layer which color is white.
So, why isn't it white? It's still orange. How can I change the color?
[URL]...
how to change the colors of a entire document like in color styles in x5
View 7 Replies View RelatedI want to be able to change colors across my entire image. Kind of like the bucket tool when it is on universal, but with a few changes. It would be able to change dark red into dark blue and also light red into light blue at the same time when the tool is used. It would scale based on the lightness of the color throughout the entire image.
I could basically choose blue, click on any red part with the tool, and then every red color (with a certain tolerance) would change into blues of the same lightness and darkness as red. I was thinking that this would be useful for changing the colors of objects that have certain shading effects or shadows in them.
I am trying to change bowl color white green .
View 2 Replies View Relatedchange the colour of this font from red to white and also explain how you do it because i cant manage it
View 9 Replies View RelatedHow to change the background color to white? (Don't edit the text.)
View 9 Replies View RelatedI have color pictures in TIFF and I need to change them to black and white pictures in order to be published in a scientific journal. My question is which is the best way to do that?
Another thing that I have to do is make figures (which include pictures and graphs) I'm plainnig to prepare them in Illustrator and Photoshop, then I have to send those figures in a TIFF format with at least 300 dpi, any tip for that?
about black to white color changes and vice versa. I have a client that will often ask for this and i know its a pain in the butt but i have to do it. is there any layer styles i should be using or is it just a matter of levels, curves, brightness, untill you get it right.
View 4 Replies View RelatedI was wondering how do I change the white background color to another color? I do enjoy using Paint.Net very much, it does suit my needs, in fact it's better than the windows paint program, far better!
View 4 Replies View Related