If I open a jpg with a 72.000 dpi image in Gimp, remove background and save as a transparent png, the next time I open the transparent png in Gimp the dpi is 72.009! and if the jpg has a dpi of 150 it becomes 150.012 dpi in the png when I next open in in Gimp!
why is Gimp slightly changing the dpi resolution in my png files?
I have a Tiff image ( size : 5.3 mb). Wanted to export into jpg with a lower resolution. I waited for the process 35 mins and then had to cancel it. and when i checked the preference inside GIMP it looked like the attached image file.
View 1 Replies View RelatedI'm trying to create a high resolution version of a low resolution texture used in a game. I've found a pattern that I think is acceptable, from a real image.Now the question is this: how can I colorize the large image to that it is as resemblant as possible to the original one? I've tryed a simple colorize, but the result is not so good...
Original texture:
[URL]
The image to be colorized:
[URL]
I have a screen capture video which is 1024x768. I want to edit it and export as .mp4 in its same resolution--1024x768. You would think this would be easy, but it's grayed out. I tried Settings, create a custom export format and it was grayed out there too. How do I export my 1024x768 video as 1024x768 .mp4?
View 4 Replies View RelatedI was designing a Business Card using Illustrator and after finish when I was trying to save the project like an .eps with High Resolution the program didn't work and gave me an error "Stopped working" , I tried again and the same happened..
View 1 Replies View RelatedWhat is the best resolution to export photos for Facebook/Blog/High Res?
View 1 Replies View RelatedI have started offering the option to buy high resolution pictures to cd. File Settings, Image Size, Output Sharpening - so many boxes and not sure which to check or leave unchecked A couple of the pictures I cropped to 4x6 but the others are all the original as I shot them.
View 3 Replies View RelatedIs there a way to export at a lower resolution or to change the resolution in some way so the resulting PDF isn't so large?
View 5 Replies View RelatedI export pngs almost exclusively from Xara. I have always opened them in PSP and changed the resolution to 118.50 (about 301dpi) so they are print ready.
I have to make over 21,000 arrows (sob) and having to open each and every one of them in PSP is not something I am looking forward to. There is a way to change the png export resolution to something more suited for printing.
I changed the resolution on a photo to 500 in the export screen. What do I reset it back to for the highest resolution. I changed to 500 to email a photo.
View 4 Replies View RelatedI create a new black document with rendering resolution set to 150dpi.
If I export the artwork as JPEG, and check "Maintain Size", I'll get the artwork in correct dimension and resolution. However, if I export as TIFF, the resolution by default is 72dpi, and if I increase the resolution to 150dpi, the dimension reduces accordingly, ending up with a smaller bitmap exported.
I am trying to export .MOV file for resolution 1280x1080 (HD) compression is DVCPRO (for broadcast) server is Harris. And i m making a project on the 1280x1080 8 bit, field 2, fps 25. and using the file which has size 1280x1080 at 50 P.
So when i export this as .MOV and choose compression DVC pro 1080. it gives me error message, "frame rate and bit dept is not same of the clip and compression u choose
Artwork is done at 5x7in, i want to export this as a PNG for print purposes however the more i increase the ppi the bigger the pixel size. I want to export it at a high resolution but keep the pixel size to 500x700.
Is this possible?
Currently to achieve the 500x700 pixel size i change the ppi to 104, if i switch off anti alias then its fine for straight lines and shapes, however if i have a line or shape at an angle it gives these shapes a jagged edge!
why my drawing on illustrator won't export at maximum resolution when a nearly identical drawing can.
View 2 Replies View RelatedHow do I scale without losing resolution? I'd like to make the image smaller without it becoming blurry
View 3 Replies View RelatedI understand there's a plugin that can increase the quality of a low resolution JPG, smoothing out the pixel effect. which one it is, if it exists?
View 3 Replies View RelatedSo I started a new xcf, but I forgot to change the resolution from 72, to 300.....
Is it too late? Is there anyway to change the resolution now?
Considering just copying and pasting all the layers into a new xcf.... it's mostly text boxes, will the old resolution affect this process?
I've received several scanned images from another party in .jpg format. The file sizes of some run about 100k and others about 300k.
When I looked at the image properties they were almost the same for each of them. All of them had a resolution of 96x96 and each having around 40,000 pixels (roughly 500X800 pixel images). The print sizes were all about 5.5x8.5 inches.
Why would .jpg images with similar pixel resolution and number have such different file sizes?
I drew up a logo design a while ago and when I finally printed it, I realized I know nothing about scaling my drawing to an actual real printed size. Is there a way to know the size in inches and/or a way to see it on the page (i.e. a print preview). Also, when I do print, it's majorly fuzzy for some reason.
View 1 Replies View RelatedI am trying to create a 30" 24" poster that contains (12) 3" x 4" photos. I have resized all of the photos from 2.5MB, but the completed poster is only 850kb. I do not think that if I were to print this out to 30" x 24" that it would be 'poster quality'.
when I have the file open I noticed that at the bottom left it has (53.8MB) in parenthesis. create the correct resolution that I need to make sure this poster looks like an actual poster?
I recently re-installed Gimp onto my MacBook Pro after doing a clean install I was hesitant because I did not want to install X11 again. So now that Gimp is Mac native I am happily working with it again. My problem is that every time I try to edit a high resolution photo that I have taken with my Canon Rebel T3i Gimp crashes.
My MacBook specs are:
2.7 GHz i7
16GB 1333 MHz DDR3
Intel HD Graphics 3000 512 MB
OS X 10.8.3 (12D78)
I am opening some 300 dpi photographs, but when I go to the "scale image" dialog box in Gimp, the image resolution is listed by default as 72dpi !!
But the pictures were shot in high-res, and when you look at the file properties or open the image in Photoshop, they all confirm that it is a 300 dpi picture. Only Gimp is presenting it as 72dpi. It happens that the photographs are bw, but the color mode is RGB, not grey scale.
How I can stop Gimp down sampling the images automatically if that's what is happening?
how to use layers, and how to get the colors under the black ink-lines. The results are so good, I am able to do professional-level work with this excellent coloring/image-manipulation program. Yes, I'm doing paid work with GIMP 2!
However! As I am still experimenting with several techniques [I found that scanning in at 600 on my scanner produces good-enough quality linework to color etc], I tried one cartoon frame at 1200 and although the resolution is excellent, the higher res has meant the program is slow in shutting down/flattening layers, etc. GIMP works fine in 600 resolution and I will stick to this in future.
Is there any way I can convert the resolution down from 1200 to 600 halfway through, which would save me from starting the color from scratch again? I may also have a problem e-mailing the finished pro cartoon artwork at 1200.......The image is in xcf format.
I've just started playing around with GIMP. I've made two images containing a text to start with. For DPL2.tiff, the resolution (both X and Y) is 72 pixels/in, for DPL4.tiff it is 1 pixel/in.
My question is, shouldn't there be a noticeable difference in quality of the images?
I need to change the ratio of a photo to 4:3 , and change the resolution to 1280. I don't want to loose any parts of the image.
View 2 Replies View RelatedI want to convert an image from it's current resolution of about 72 pixels per inch to 600 dpi. How is that done? This project is for a corporation seal which measures 1.5 inches per side. The stamp maker needs a .jpg at 600 dpi.
View 14 Replies View RelatedJust recently moved to Gimp. I like it but I am struggling. Millions of questions, but to start: How can I alter the resolution of and image without changing its physical size. I am trying to keep to a print size of 7x5", and reduce the resolution to 300pixel/inch. When I go to: 'set image print resolution' and change the X and Y resolution, the 'Print Size' changes with it. I have tried everything I can think of. I have make a new file at the correct resolution and pasted the image in, but the colors in the photos changed, so I dumped that idea.
View 1 Replies View Relatedit is possible to have a high resolution version ofgimp 2.8 logo?
View 3 Replies View RelatedI'm trying to use some pictures to design a calendar online and the pictures have to be high resolution to look right. I had no problem changing the resolution on paint shop pro until it decided it crash and never reopen. Now I'm trying to figure out how on earth to do that with gimp. On PSP I just went to image/resize and all I had to do was change the 72 to 300. I'm at loss on how to do it with any other paint or photo program.
View 1 Replies View RelatedIs there a way to change the resolution of a picture without it changing the size.
I cannot find a way to separate the two..
When saving as a .png file, there is an option to enable/disable "save resolution". What is this option for? I've tried Googling, but no luck due to many unrelated search results.
View 4 Replies View Related