GIMP :: Using Tile To Make Array Then Displays Incorrectly In Weebly
Aug 31, 2012
I've been using Tile to create an array from a jpeg image to use as a background for a website I'm building using Weebly. The original images display fine in Weebly, and when I use Tile to create the array the resulting image looks flawless in GIMP and in the picture viewer on my desktop. However, when the image is uploaded to Weebly it displays as though the original layer has been duplicated in GIMP and tiled manually and badly, i.e. leaving white space along edges, incorrect alignment of tiles.
View 2 Replies
ADVERTISEMENT
Oct 29, 2011
Works as it should in Direct3d but Nitrous displays specular weaker than it should. It shows up correctly when you render though.
View 1 Replies
View Related
Jun 10, 2010
Last week I installed a new True Type Font in Windows, so that our drawing title blocks comply to our company standards. I noticed that when checked in into the Vault, the title block containing the new font doesn't display correctly. It shows the new font, but it's distorted; it's bigger, and the letters are too close to eachother. When printing from the Vault, this doesn't change, it's exactly what Vault shows. (See attachments). Also when publishing from within Inventor (File --> Export --> Export to DWF) the font gets distorted.
Posted this message in the Vault-forum, but according to Autodesk it's an Inventor related issue.
Our non-Cad-people are complaining about this, because it's non-compliant to our standards... How can I correct this matter?
Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
View 6 Replies
View Related
Oct 28, 2013
After upgrading from 2013 to 2014 we have a few drawings that had profiles created in 2013 and now when we open the drawing in 2014 the profile view disappears and so we regen and then we get a fatal error. I ran an audit and there are no errors, I re-sycronized the surfaces, i also ran an audit on all the xreferences.
View 1 Replies
View Related
Oct 18, 2013
We are having an issue with profile grid shooting off to the left of 0+00 rather than starting at 0+00 and stopping at the end of the profile. There is nothing in the settings that I can find that is telling the grid to extend close to 2000' to the left. Three of the four profiles are doing this. One of them displays correctly, but there are no differences that we can find in the settings.
View 7 Replies
View Related
Jul 8, 2013
When I bring an xref drawing (floor plan) into a plot sheet drawing the xref does not display properly. Walls at doors are not removed and have jambs and door in what appears to be 'reflected screened' view. Switching to 'reflected' view, walls not removed, jambs and doors, and windows still showing.
I may have inadvertently changed some of the settings in the display manager, is there any way to restore the defaults here without reloading the program?
View 3 Replies
View Related
Dec 31, 2013
Using part builder, I created a new pipe part for an odd-sized CMP arch pipe. In plan view, the pipe looks good. At first glance, I thought the pipe was drawn correctly in a profile view, but I realized that the pipe was displayed with the invert located at the wrong place in the profile view. I thought this was because the insertion point of the new pipe part that I had made was placed at the incorrect location in part builder.
So, I swapped out the incorrect pipe size for another one that I knew was correct, and then deleted the incorrect pipe from the pipe parts list, and went back to part builder, and placed the insertion point at the invert of the pipe; then saved the edited pipe part, ran partcatalogregen, added the "corrected" pipe part to the pipe parts list and swapped in the new corrected pipe size to the pipe network. However, the pipe still displays incorrrectly on the profile view.
The pipe data is correct in the pipe properties: the invert is stated to be located at elevation 20. The overall height of the pipe , 38" (3.1667') is correctly displayed on the profile view. But the actual location of the pipe invert is not shown at the correct location, elevation 20, on the profile view.
View 4 Replies
View Related
Jun 9, 2008
remember in mario paint how you could make stamps using pixels?
well i'm trying to make a tile pattern outta pixelated photos of paintings.
i tried resolution changes but then the image size obviously gets too small to work with.
View 1 Replies
View Related
Oct 16, 2012
I have a problem with fonts from 2.8 version . Some fonts are displayed incorrectly, ie. than otherwise would be.
View 2 Replies
View Related
Jan 10, 2014
Where is Tile Cache Size
View 4 Replies
View Related
Mar 11, 2013
I just noticed that a large amount of RAM has been allocated for "Tile Cache Size" under GIMP preferences. What is tile cache size, and how much is generally needed?
View 1 Replies
View Related
Dec 6, 2012
I have a 512x512 pattern I need to fill a 2560x2560 area that should go 5x5...
Do I have to paste it manually, or is there a way to get the pattern fill to actually tile properly? It's not.
Using V2.8.2
View 3 Replies
View Related
Apr 21, 2013
I am using GIMP 2.8.4, on a netbook running Windows 7 SE, with 1G RAM, and a 1.6GHz CPU.
Ever since I started to use GIMP 2.8.4, I get this "unable to read tile data from disk" prompt, and a tile in the picture is missing, frequently.
I attached a screen shot of the prompt.
Is this because of my hard-disk? or a known bug in GIMP 2.8?
View 2 Replies
View Related
Nov 30, 2012
I'm trying to make a repeat pattern tile (using CS5 on Windows 7), but when I crop the pattern, the expanded paths underneath become visible as on the flowers.This is what I did after creating the artwork:
Used the rectangle tool to make a box with fill/stroke directly on top of the artboard.. Select all > Expand (selecting stroke only, not fill) Deselect the cropping box and grouped the remaining objects. Reselected the cropping box and grouped all objects Pathfinder > Crop I'm guessing it may have something to do with the fact I used a gradient on the flowers but how to resolve it.
View 6 Replies
View Related
Mar 5, 2013
I have been using Gimp for a lot of "tile based" images, which feature layers composed of several "tiles" pasted into those layers. However, I just recently started creating transparent tiles, and pasting them.
One of the strangest things I have run into here is that I don't seem to be able to move my selection ( Floating Layer? ) if the opacity on the source pixels is 0.25 or less. Specifically, I do not get the usual "drag box" when I hover over the transparent pixels. Instead, I get the "anchor box" ( which seems to crop the pasted area before anchoring ). I tried this on a composite image with some more transparent pixels ( 0.25 ) and some more opaque pixels ( 0.26 ), and the "drag box" appears only over the more opaque pixels.
Why this might be happening? It could be that this is just context-sensitive cursor behavior which varies on transparency, and if so, is there another way to move the pasted selection?
View 3 Replies
View Related
Oct 13, 2011
when I wanna make an array, i've to make all my choices on the command-line. How can I make appear the array-window, which I used to have in previous autocad versions? is there any variable I have to change? I'm using Autocad 2012 now.
View 4 Replies
View Related
Oct 19, 2011
How to make an array in a spiral?
Without first arraying down, then polar, then deleting the extras?
View 2 Replies
View Related
Mar 29, 2013
i managed to test G2.8.4 without uninstalling my current 2.6.And therefore, i have some questions, and the first one is about the strange behaviour of the image drawing when panning the picture.Instead of long boring words, lemme post a picture of the picture window after panning the image: The image is brought as attachement...
After a short time ( from less than 1 sec to 2-3 sec) this appearance disappears and the image is properly drawn.
for info: win7 on AMD dual core with 4Gb RAM and a Geforce GT 210 with 512Mb VRAM. drivers are up to date
View 9 Replies
View Related
Jan 21, 2012
how to make spiral array? I am to model ballscrew and would like to put ball in. To do so I would need something like spiral array.
View 8 Replies
View Related
Jul 15, 2004
Do is IV able to make a array out rotate items?
View 9 Replies
View Related
Apr 5, 2011
This is an oven design in 3D. But I would do it brick by brick, if feasible. Below the picture. Some considerations: I tried to do using Autocad 2012 using the Polar Array new feature, but I can not close the oven on top.
[URL].......
View 9 Replies
View Related
Jan 11, 2014
I have an image that has elements pasted in from PNG files, and those elements have some shades of green. I want printed output in gray scale only, so I did Image -> Mode->Grayscale. The image on screen went gray as I wanted. When I print it, however, I get an image in which *some* of the colored parts still are colored!
View 1 Replies
View Related
Jul 19, 2011
I am creating a set of parametric stairs. All of my constraints are in place for my 2 main work points. I am now trying to make an associative path array to depict the stair treads. Path array works great initially, however when I change my variables for stair height, my stair treads tilt with my work line in such a way that they're no longer parallel to the floor.
The angle of the stairs must be variable as it will change from one set of stairs to another. All that said, I am wondering if there is some variable or command that will make the treads retain their ucs orientation regardless of the angle of my path line. I've tried every option while creating the array with no luck.
View 4 Replies
View Related
Sep 30, 2011
How does one get the array window in 2012 to open with the array command like it does in 2007
View 2 Replies
View Related
Sep 19, 2012
I'm trying to use the PATH array feature on 2013 to array stairs, and I can't get the array to be 100% accurate. It seems like CAD rounds the decimal to the nearest 3/4" which could be causing the problem.
I set my run to 10.5" and rise to 7.25", array along the angle of the stringer, and there's always a small overlap on the stairs. The "distance between" should be 1'-209/256" and CAD rounds it to 1'-3/4" which is where I believe the error is. Is there any way to fix this or array this correctly? Otherwise...back to the COPY method I suppose.
View 4 Replies
View Related
Mar 20, 2013
I'm using save for web from Photoshop to save a png 24 (so, with transparency). When using png files with transparent backgrounds the colors end up showing a bounding boxes of each element. So if I have a solid black zero, and a red TM om the same image it looks fine everywhere except 3dsMax. In Max it shows as a big black box, and a little red box. The alpha channel reads just fine though.
I am quite annoyed that I have to go back and save all my maps as jpgs with one of them being an alpha map if I want to see them properly in the viewport. I can use the images because it only messes up the outside of the color, but it's difficult to map the placement of certain images. Surely a few people here use Photoshop to create png files for import into Max right?
View 6 Replies
View Related
Dec 18, 2012
Just installed acr7.3 and cs6. I have previously saved jpgs but wanted to play with POSSIBLE settings in the new ACR. Ok so I make some changes and only say DONE.. I do not open and resave. Going back to Bridge.. the preview now shows me the 'new' acr tweaked version and that jpg will NOT open in CS6 again without going through bridge to apply the tweaks I made.
Problem is, the jpg itself is still saved the OLD way and I want that version back. How do I get the bridge to show the saved jpg that I have, once I play with it in acr??
View 4 Replies
View Related
Nov 8, 2012
I recently updated my operating system to MAC OS 10.8 and as a result, Photoshop 5.5 no longer prints colors accurately. I corresponded with the tech department at Adobe for more than a week and we determined that my user settings did not migrate properly when I upgraded, resulting in skewed colors when printing from Photoshop. In running tests, we made a new "root" user and Photoshop printed correctly when using that user. How to fix my user settings/profiles so that my paper and printer profiles operate correctly in MAC OS 10.8 when printing from Photoshop?
View 4 Replies
View Related
Aug 26, 2013
Yesterday, I sent a drawing that I scaled as 1/2" = 1'-0" in an Adobe PDF, and was told by the receiver that the drawing scale was off by 3-4% when they measured it. Hoping that is was the printer's problem, I sent a drawing from another file to FEDEX, and went and scaled that one myself. Sure enough, it's off. It doesn't matter whether it is windowed or brought in a paper space viewport.
View 9 Replies
View Related
Feb 5, 2009
I recently bought CS4 and have noticed that everything displays differently in Photoshop than anywhere else. I can not get a pure white. Pure white looks yellow, like french vanilla ice cream.
I have tried everything I can think of to rectify this situation. I have tried changing color profiles, etc. but I obviously don't know what I'm doing, because none of the changes have any effect.
I really need to get this fixed. I have been a Photoshop user for 15 years, and throughout all the versions I've used prior to this one, everything displays properly. I am BUGGED by this, big time. Such expensive software should work right.
I am using a 22" Samsung LCD monitor, if that makes any difference.
I can send screen shots to anyone...
View 1 Replies
View Related
Jan 6, 2014
I have two PSD files that won't render correctly in Illustrator. If I open the PSD files in Photoshop, everything looks OK, and if I print it, the file looks good. But when I place it in Illustrator, part of the picture is missing, and if I print it, it doesn't show up on the page. These are the only two files I've had trouble with and they both originated from the same company. Is there something wrong with the photo, perhaps?
View 4 Replies
View Related
