GIMP :: Unable To Change Offset Of Where The Tiles Start
Mar 19, 2013
I am running into trouble with the mosaic filter under distortion.
I am unable to change the offset of where the tiles start, and right now they get drawn in the middle of the image. That way, they get cut off mid way through when they reach the edge of the image.
I can't easily remedy this by cutting out the center, and moving the halved pieces together because they're different tiles and have different colors.
I think I can just move it over, and do another seperate mosaic on the missing region but I'd really like to be able to change that.
View 1 Replies
ADVERTISEMENT
Aug 24, 2012
I get file-tiff-save.exe & file-tiff-load.exe Application Error when opening Gimp 2.8.2 in windows 7 64-bit.The error: The application was unable to start correctly (0xc000007b).
View 5 Replies
View Related
Apr 28, 2013
I got this error
Unable to start application (0xc000007b).
I already tried several fixes like:
1. reinstall all redist(x64 & x86).
2. reinstall .Net 4.0
3. Use CCleaner for Registry error.
4. chckdsk for error and fix.still error so I've gone through this.
5. I uninstall Autocad 2014 completely, uninstall it manually one by one,deleted left over folder of autodesk or similar software to it, deleted its registry keys.just like the instruction on how to remove autocad completely in autodesk, I just followed it all. [after Reboot]
6 I Re-install it and still the problem persist.
View 9 Replies
View Related
Mar 20, 2014
primere pro will not start... appliction unable to start correctly 0xc000007b
View 1 Replies
View Related
Jan 14, 2012
I use Photoshop CS5 on i Mac 3.06GHz IC2D with Lion 10.7.2. When I start Photoshop a Popup says : Could not load the Bigger Tiles Modules because it does not work with this version of Photoshop. but how to disable this Popup at every start ?
View 13 Replies
View Related
Mar 11, 2013
How do you Offset the START CORNER of Cross Sections. I see where you can chose, Bottom Left, Top Left, etc...
I need to move the START CORNER Down and Left. See Attached.
View 5 Replies
View Related
Jun 10, 2012
I am unable to change the settings for any brush because they are all grayed out. It's like this for my custom brushes, too.
View 1 Replies
View Related
Nov 3, 2013
I have used Gimp for years and today I simply cannot move layers. In the layers dialog I usually drag the layers into the desired order but for no reason the layers simply float back to their original position. I have tried;
- Clean install of gimp
- Opening various gimp files (xcf)
- Creating new xcf files
The layers are not;
- Locked
- Floating
I have attached a video of the problem, which can also be viewed at;
[URL].......
View 3 Replies
View Related
Jun 26, 2013
I can't change the Gimp brush color at all, here's a picture below of what I'm trying to do:
[URL]........
I'm trying to change it to an auburnish color but the brush just stays black when I paint on the canvas. As you can see I did change the color though.
View 1 Replies
View Related
Jun 16, 2011
I have created my own graphics from scratch with GIMP, but the resolution to this issue is eluding me.
I imported a GIF map and want to add red labels. I have no problem adding the labels, but I cannot seem to get the text colored red. Before I create the text layer, the text tool shows the color is red, but it still creates it black. All of the suggestions I've seen (yes, I've read the fine manual) reference the same things, including dragging the color from the foreground color (which I've also changed to red). Nothing I've tried seems to work. I've even saved the image as an XCF, but I have the same problem.
View 3 Replies
View Related
Jan 11, 2014
How to use a photo behind cut out text and everything was going fine until I tried to add text and change the color. The text is invisible even though I changed the color to white and the box resized itself really small and I can't see anything even though I set it to 150 px.
Try to unchecking the 'dynamic text' button but I don't see this button anywhere in my text tab.
I have never been able to successfully use GIMP for anything because of this problem with adding text. I have had 2 versions, Windows and Linux. Right now I am using it with Pangolin.
View 1 Replies
View Related
Jun 4, 2011
I need to do some shading work in Gimp, and for this it would be very nice to have a quick way to change my brush size. Luckily there's a note in the gimp docs on how to program the mouse wheel to do this:
[URL] .....
My laptop only has a touchpad with a little scroll area on the side, but I can't think of a good reason why this should be any different from a scroll wheel on a real mouse. Unfortunately, though, following the documentation doesn't work.
In fact, as far as I can tell, the input controllers dialog does nothing at all on my system--I've looked at the settings for the all of the 'active controllers,' and none of the current settings there match with the actual behavior of Gimp as far as I can tell. It also worries me that the controller names are so generic--they're listed as 'Main Keyboard' and 'Main Mouse Wheel' rather than mentioning a synaptics touchpad, and my tablet doesn't even seem to be listed.
I am using Gimp 2.6.11 on Ubuntu.
View 1 Replies
View Related
Jun 27, 2012
I am currently working with an elliptic profile that needs to be unfolded. The part consists of two sketches, with each sketch having two ellipses. The ellipses on each sketch then forms a cross-section where the thickness of it is supposed to be 8 mm (the first ellipse is offsett).
My plan is then to generate a mold for the inner and outer sides of this part by using the "Lofted flange" function and Rip, since I want the flat pattern of it. However, I've found that I can not select my offset ellipse when using Lofted flange, only the original one. I'm thinking that this might be caused due to the offset ellipse not actually being an ellipse but a spline (I read somewhere that there are two ways of offsetting an ellipse. One generates a mathematical ellipse and the other a spline). Creating an new ellipse and then saying that the a and b distance should be 8 mm less than the other ellipse will work, but that will not give me a constant wall thickness of 8 mm along the circumference of the elliptic cross-section.
View 9 Replies
View Related
Mar 20, 2009
I have just loaded CS4 after running CS3 but when trying to start it returns with the error message
"Photoshop.exe-Bad Image
Cwindowssystem32opengl32.dll
is either not designed to run on windows or contains an error"
I have updated all my graphics and m/board drivers and still get the same error
Ihave also removed and reinstall PSCS3
CS3 has been running ok up until yesterday when it also returned the same error
system
vista 32 with SP1
2.4 ghz quad core Q6600
4gb mem
nvidia 7300 graphics card
View 4 Replies
View Related
Mar 20, 2009
have just loaded CS4 after running CS3 but when trying to start it returns with the error message
"Photoshop.exe-Bad Image
C:windowssystem32opengl32.dll
is either not designed to run on windows or contains an error"
I have updated all my graphics and m/board drivers and still get the same error
I have also removed and reinstall PSCS3
CS3 has been running ok up until yesterday when it also returned the same error
system
vista 32 with SP1
2.4 ghz quad core Q6600
4gb mem
nvidia 7300 graphics card
View 8 Replies
View Related
Mar 8, 2013
when I start coreldraw x6 , there is notification "the application was unable to start." and NET.4 Installed, anti virus disable.win 7 64 bit.
View 2 Replies
View Related
Sep 11, 2013
I just installed the 3ds Max Design 2013 and it completed successfully. However, when I try to launch it, I get an error box saying 'the application was unable to start correctly(0xc000007b). click ok to close the application.'
View 1 Replies
View Related
Oct 23, 2012
I found out that you can't change line color in the line nova because a fix to prevent white on white or something like that. Is there another way to change the line color.
View 6 Replies
View Related
Jul 22, 2013
recently our Autocad LT 2013 has started giving out the "The application was unable to start correctly (0xc00007b)" error randomly on program launch. Thinking SP2 would fix it, i tried installing through autocad, but after it says transferring, nothing happens and everything closes and this box comes up. If I go and get the update package and install it manually, i get the same error. This machine is running windows 7 pro x64 and I have already tried a repair, and full uninstall/reinstall.
View 4 Replies
View Related
Mar 25, 2014
I get a message saying "Application unable to start (0xc000007b)
View 2 Replies
View Related
Jan 18, 2014
Unable to start audio playback. Please confirm your audio device is properly configured or change the driver selection in Preferences: Audio Hardware. On After effects CC
Im on a mac with mavricks OS and i have done what it says and changed it but it go's back to the setting that it was on the one that does not work.
View 1 Replies
View Related
Mar 6, 2013
I have installed After Effects CS6 in a Mac running 10.6.8(Snow Leopard) with 4 GB ram and have installed all the updates of After Effects. Whenever I try to get the audio output, i get an error: " After Effects Warning: Unable to start audio playback. confirm your audio hardware is properly configured or change the driver selection in Preferences: Audio Hardware "
I tried to reinstall the software and also I tried the Audio MIDI Setup configuration but it too is of no use.
View 13 Replies
View Related
Jul 6, 2011
Is it possible to get a offset from a selection? Something like the very useful offset tool in Google sketch up?
View 2 Replies
View Related
Jul 17, 2013
I have this issue when i start the Revit, what should i do...
The application was unable to start correctly (0xc000007b)
View 2 Replies
View Related
Sep 17, 2013
I was already upgrade my laptop to windows 8.1 preview 64-bit,I have this only one error when was start my cad application autodesk inventor pro 2014 student version.
View 4 Replies
View Related
Mar 24, 2013
Once open Photoshop and clink on Edit, this message shows up, and if choose "Check online for solution..." no new action happen, the program shut down, restating does not work. Before there were no troubles with program.
View 2 Replies
View Related
Jan 10, 2013
Yesterday i work normal on my PC and after the windows Updates from today my Corel doesn´t start.
@ frist I try ti uninstall all updates from Microsoft and restart my PC.
My System:
Win7 64 (a Complete new installation)
VMWare Mashine
4 Core
8 GB RAM
View 4 Replies
View Related
Mar 3, 2013
AutoCad LT2009 has been running on my windows 7 computer for 3 years but now I get the message "The application was unable to start correctly(0xc0150002). Click OK to close the application." I have Google surched the application error message and found one reference to a similar but different numbered message for AutoCad LT which suggested down loading Microsoft Visual C==2010 Redistributable package (x86) and (x64) but neither of them worked.
View 3 Replies
View Related
Jul 24, 2012
I can not get certain linetypes to start with the same dash length, see attached. The linetype will start with a longer dash then the stated length, depending on the length of the pline segment. Is there a way to fix this?
Here is the code for one of the linetypes highlighted:
*FENCELINEc,EX FENCE X---X---X---X---X---X---X--
A,.125,-.0625,.125,-.0625,.125,-.0625,.125,-.125,[FENCEx,FENCEx.shx,x=-.025,s=.1],-.0625
View 4 Replies
View Related
Jun 12, 2013
Application error msg :" The application was unable to start correctly (0xc000007b).
Running W7 64.
View 2 Replies
View Related
Jun 3, 2013
I am creating walls so im using mline with mstyle. the problem is when I create the mline for different walls. for example drawing mline for a wall that is 20 units and then moving to a wall that needs to be 30.
is there any way to change the mline style or offset in creation time?
View 3 Replies
View Related
