I can't change the Gimp brush color at all, here's a picture below of what I'm trying to do:
[URL]........
I'm trying to change it to an auburnish color but the brush just stays black when I paint on the canvas. As you can see I did change the color though.
I am unable to change the settings for any brush because they are all grayed out. It's like this for my custom brushes, too.
View 1 Replies View RelatedEverytime i use a brush it stays white i cant change the color of it. I tried reseting brushes the color mode is set to RGB color and im still having trouble...
View 2 Replies View RelatedI need to do some shading work in Gimp, and for this it would be very nice to have a quick way to change my brush size. Luckily there's a note in the gimp docs on how to program the mouse wheel to do this:
[URL] .....
My laptop only has a touchpad with a little scroll area on the side, but I can't think of a good reason why this should be any different from a scroll wheel on a real mouse. Unfortunately, though, following the documentation doesn't work.
In fact, as far as I can tell, the input controllers dialog does nothing at all on my system--I've looked at the settings for the all of the 'active controllers,' and none of the current settings there match with the actual behavior of Gimp as far as I can tell. It also worries me that the controller names are so generic--they're listed as 'Main Keyboard' and 'Main Mouse Wheel' rather than mentioning a synaptics touchpad, and my tablet doesn't even seem to be listed.
I am using Gimp 2.6.11 on Ubuntu.
I have created my own graphics from scratch with GIMP, but the resolution to this issue is eluding me.
I imported a GIF map and want to add red labels. I have no problem adding the labels, but I cannot seem to get the text colored red. Before I create the text layer, the text tool shows the color is red, but it still creates it black. All of the suggestions I've seen (yes, I've read the fine manual) reference the same things, including dragging the color from the foreground color (which I've also changed to red). Nothing I've tried seems to work. I've even saved the image as an XCF, but I have the same problem.
How to use a photo behind cut out text and everything was going fine until I tried to add text and change the color. The text is invisible even though I changed the color to white and the box resized itself really small and I can't see anything even though I set it to 150 px.
Try to unchecking the 'dynamic text' button but I don't see this button anywhere in my text tab.
I have never been able to successfully use GIMP for anything because of this problem with adding text. I have had 2 versions, Windows and Linux. Right now I am using it with Pangolin.
I found out that you can't change line color in the line nova because a fix to prevent white on white or something like that. Is there another way to change the line color.
View 6 Replies View RelatedA couple days ago, I was making some images, and I looked up a tutorial on how to make a watermark [URL]....... I did everything it said, but I could not find the brush.
View 2 Replies View RelatedI am unable to set up parametric brushes that work correctly with a keyboard shortcut. At first when I assigned the keyboard shortcut to increase or decrease the parametric brush radius, as explained here Setting up GIMP for Artistic work, nothing happened when I pressed my new shortcut. Finally I, for reasons beyond me pressed the "reset size to brushes native size" button and it worked....sorta. It seems to work only within a limited range.
For instance. I reduce the radius all the way down to 1 then "magic size reset button" which sets size to 3, then I get a small brush. However when I increase size past 2 for the radius it doesn't increase further(the actual brush on the screen, the numbers change but that's it) until I press the size reset button. It's really frustrating because I can increase the radius using the keyboard from 2 to 9000 but I'm only getting a 2 pixel increase on the screen, unless I do the size reset then it jumps. I'm using Gimp 2.8.4 on windows 8 also set up to use a wacom tablet.
I am trying to locate the brush folder on my computer. I am unable to locate any type of folders for gimp. I download gimp straight from the website.
I am trying to make s water mark and use it as a brush that is the reasoning locating the brush folder.
not able to edit brush features in gimp 2.8; options are not editable...
ubuntu 12.04...
I have a star that I would like in a specific color, but am having issues changing it with the replace color and/or color replacement tool. The image is small, but I am trying to have all the pixels. The color I want to use is Pantone solid uncoated 655 U. This is the image I am trying to change.
View 4 Replies View RelatedWhen I move my mouse over the drawing area, the brush simply freezes at the corner next to the rulers, the regular cursor continues to move and I can click on the buttons, tools and menu, but my mouse is not functioning in the workspace, I can use my wacom tablet fine, but I still need my mouse to be functional for lassoo tools etc.
It is a very recent install, I may have some how buggered the mouse input when configuring my wacom.
I'm running Arch Linux, with KDE.
i just installed photoshop cc on my pc and i have being trying to use the brush tool. whenever i want to change the brush color the color doesn't change have tried so many techniques, it just doesn't work,
View 1 Replies View RelatedI make a new image with transparent contents and my brush will only draw in transparent NOT in the color I select.
View 3 Replies View RelatedI've a problem with changing the color of a brush in Illustrator. I've download a brush package for Illustrator, and found a nice brush for a logo.
All the brushes are in black, and when I want to change the brush color into a other color, the whole area of the brush will be a other color.
How can I change the color of the brush?
In an older version of gimp I was able to set the spacing of a brush (for smudging and such) and I currently have gimp 2.8 but I don't have the option to anymore. How to change the spacing of a brush now?
View 1 Replies View RelatedHow can I change the color of this image brush? I'm unable to change the Colorization options as I've seen done for other brushes in tutorials.
View 2 Replies View RelatedI recently upgraded to 2.8 and I like the interface changes a lot, but I have an issue with the brush slider's default scale of 0 to 1,000. For what I am doing, I would really prefer to set the scale more like 0-25. Is there a way to do this?
View 1 Replies View RelatedBecause brush size slider is really not easy control for tablet pen, Idecided to create some brushes (range from 1x1 to 9x9 ) for daily use.But I found gimp 2.8.4 does not change the brush size when I selectanother brush. How to make 2.8.4 not persist in prior size setting?
View 1 Replies View RelatedI'm using Paint.net since few years, and now I'm trying to coloring a brush with a precise color. I would like the brush to be in a blue color 3914AF (for example). I tried to use different fusion mode like "screen" on a third layer that I colored with this color...but it also let the color out of the brush itself. I thought of using the magic wandle before but to have a correct result...
HOW to change the color of any PNG brush directly in the picture in Paint.net.
Attached Thumbnails
That was one of my favorite effects in GIMP. Can do it just fine using Portable Gimp and 'use color from gradient'. But in GIMP 2.8.2 -- that's been taken away and we've been left with a confusing new Gradient system . Do NOT like it so far at all. Haven't figured out how to change the color of the sparks brush on it, let alone use it in any practical way.
Any way to be able to use this new version of the Gradient system and be able to change the color of the sparks brush?
I am using gimp in Lubuntu 12.04 (using gimp 2.8). The Wacom attached is a Splash.
When I select a brush/color besides the default, it automatically switches to the default/black when the pen gets close enough to be detected by the tablet.
I was trying painting with gimp and there is a shortcut in gimp to change the size of the brush/opacity my moving the stylus like you can on photoshop or sketchbook pro.
ALT+ctrl on a mac
This would be an incredible time-saver for us artists and not very complex. If not I will suggest this feature to the gimo developers.
How I choose a color for any new objects I want to create. I've opened the toolbox with ctrl-b, which appears on the left side of the window. If I want to , for example, draw a red rectangle, I use the rectangular selection tool, then the bucket fill, and I don't see how to change the foreground color to red.
I've read elsewhere in the forum that there should be two rectangles somewhere on the screen that show foreground and background color, but I don't see them anywhere.
I can't seem to change the color of the sun. Its stuck on a strange shade of brown. Also I created a new material. It was a shade of grey metallic paint. Except that it appears to have a red tint.
View 1 Replies View RelatedWhen in brush mode, clicking "ctrl" switchs to color picker until yourelease. Is this shortcut editable? What if I want this to be set onAlt instead, for instance?
I could not find any shortcut which looks like it would do this in thekeyboard shortcuts list. Is there one? How to change this shortcut?
I have used Gimp for years and today I simply cannot move layers. In the layers dialog I usually drag the layers into the desired order but for no reason the layers simply float back to their original position. I have tried;
- Clean install of gimp
- Opening various gimp files (xcf)
- Creating new xcf files
The layers are not;
- Locked
- Floating
I have attached a video of the problem, which can also be viewed at;
[URL].......
I have tried unsuccessfully to figure out how to color match in GIMP. I found a tutorial for photoshop, but for whatever reason I cannot translate it to GIMP. Tutorial is here:
[URL].......
I am designing wedding invites for my sister's wedding, and want to match the color of her preferred flower to the flower bunch I'm placing on her invite. This is the bunch I'm using:
This is the color I need to apply to the bunch I'm using:
I am running into trouble with the mosaic filter under distortion.
I am unable to change the offset of where the tiles start, and right now they get drawn in the middle of the image. That way, they get cut off mid way through when they reach the edge of the image.
I can't easily remedy this by cutting out the center, and moving the halved pieces together because they're different tiles and have different colors.
I think I can just move it over, and do another seperate mosaic on the missing region but I'd really like to be able to change that.
I am referencing a survey file in my site plan. Both were created using Civil 3D. I want to change the color of all of the reference files' layers to 250, so I selected them all in the layer properties manager and did so.
However, some layers are not changing colors. One layer is red in the reference file, but comes through on the site plan as magenta. Some Civil3D structures are also refusing to change colors.
I selected all of the objects in the reference file and made sure their colors were "by layer," but it did not completely fix the problem.