I recently upgraded to 2.8 and I like the interface changes a lot, but I have an issue with the brush slider's default scale of 0 to 1,000. For what I am doing, I would really prefer to set the scale more like 0-25. Is there a way to do this?
View 1 RepliesI completely reinstalled GIMP 2.8 and put Andrew's Script (found here: URL....) into "C/USER/ADMIN/GIMP 2.8/SCRIPTS" (I'm stuck with Windows Vista Home Premium) running on an Acer laptop. Now the "Opacity" and "Brush Size" sliders have shown up where they're supposed to have been on the first install.
My middle mouse wheel used to control brush size - I recently reinstalled my updated Logitech mouse drivers and I'll bet if I go to "Setpoint" in my system tray, I'll be able to configure the mouse wheel from there. That's where I had to go in order to fix the tilt control in Google Earth after I updated the mouse drivers.
I just installed GIMP 2.8, with Andrew's GIMP Script FU and now I can't find the brush opacity slider anywhere (EDIT: Or the brush/eraser/pencil etc SIZE slider - there also appears to be no way to set my middle mouse wheel as the controller for the brush size). I've used GIMP for awhile and I know how to move around but I'm not very good with it.
in the tool options ... the brush size slider bar thing...
so ive been doing alot of pixel work... and i HATE how the brush size slider, if i click in the middle of the sizer bar slider thing... its like 500 pixels....
is there a way to adjust the range of this bar? in preferences or something?? i cant find it..
it is SOO annoying and would speed my workflow by like 200%
i want the slider to be like 1px - 50px .... not 1px to 1000px .... its insane... and then when i click up and down arrows it goes by .01
how to change the slider theme?It's really hard to press on it.Attached File(s)Â untitled.JPG (12.3K) Number of downloads: 5
View 1 Replies View RelatedThe sliders are nearly useless for me as I typically use pens and brushsizes of 1,5, 10 and 20. I need to change the size regularly and thesliders would be ideal yet my 'working' range is in a tiny little bit atthe end of the slider value.
It would be a huge gain for me to some how set the max slider value to avalue of my choice (say 50) rather than the current value of 1000
Is it possible? If not can I make a feature request (and if so how)
I'm using PS CS2. 'How to make a dotted line brush in Photoshop', it describes how to do this. It shows a brush palette that I can only assume is an older version (attachment 'Palette B.pdf'), because it is showing a spacing slider that mine doesn't (attachment 'Palette A.pdf').Â
View 1 Replies View RelatedI want to change a gray scale image to color how do i do it?
View 4 Replies View RelatedIn the local adjustment brush, the noise slider default position is 0.Does it reduce more noise if the slider is in positive position or negative position .
View 4 Replies View RelatedIn an older version of gimp I was able to set the spacing of a brush (for smudging and such) and I currently have gimp 2.8 but I don't have the option to anymore. How to change the spacing of a brush now?
View 1 Replies View RelatedI am unable to change the settings for any brush because they are all grayed out. It's like this for my custom brushes, too.
View 1 Replies View RelatedI can't change the Gimp brush color at all, here's a picture below of what I'm trying to do:
[URL]........
I'm trying to change it to an auburnish color but the brush just stays black when I paint on the canvas. As you can see I did change the color though.
Because brush size slider is really not easy control for tablet pen, Idecided to create some brushes (range from 1x1 to 9x9 ) for daily use.But I found gimp 2.8.4 does not change the brush size when I selectanother brush. How to make 2.8.4 not persist in prior size setting?
View 1 Replies View RelatedI am using gimp in Lubuntu 12.04 (using gimp 2.8). The Wacom attached is a Splash.
When I select a brush/color besides the default, it automatically switches to the default/black when the pen gets close enough to be detected by the tablet.
I was trying painting with gimp and there is a shortcut in gimp to change the size of the brush/opacity my moving the stylus like you can on photoshop or sketchbook pro.
ALT+ctrl on a mac
This would be an incredible time-saver for us artists and not very complex. If not I will suggest this feature to the gimo developers.
If I select a "New" document in CS5 I find that I am only able to paint or fill in in grey scale. This is new. In the Color options panel the grey scale slider is ticked and all other options are greyed out.
How do I remove the tick by the side of the grey scale slider and make the other options available for selection as normal. I note that if I open a previously opened document all options are available it just seems to be new blank documents.
I need to do some shading work in Gimp, and for this it would be very nice to have a quick way to change my brush size. Luckily there's a note in the gimp docs on how to program the mouse wheel to do this:
[URL] .....
My laptop only has a touchpad with a little scroll area on the side, but I can't think of a good reason why this should be any different from a scroll wheel on a real mouse. Unfortunately, though, following the documentation doesn't work.
In fact, as far as I can tell, the input controllers dialog does nothing at all on my system--I've looked at the settings for the all of the 'active controllers,' and none of the current settings there match with the actual behavior of Gimp as far as I can tell. It also worries me that the controller names are so generic--they're listed as 'Main Keyboard' and 'Main Mouse Wheel' rather than mentioning a synaptics touchpad, and my tablet doesn't even seem to be listed.
I am using Gimp 2.6.11 on Ubuntu.
want to a boder for each grid but the Grayscale slider prevails and all of the others sliders are off. I go to the color palette and click at the top right of the palette and a menu appears the with options like grayscale sliders, RGB Sliders, HSB slider, CMYK Sliders, Lab sliders, and HTML sliders the online one on is the Grayscale sliders after that all of them are off The layer menu is off completely, and some other features in the photoshop cs3, and when I go and save the file the GIF, JEGP and all other common formats are off, I can't save the file on those formats because psp, photoshop pdf and other that I am not interested on. I want gif, jegp etc. I have just realize that when I created a new documents I might put it in the grayscale mode only. What do you think about it guys I want to be able to apply boders and save it in gif, jepg and other common format
View 3 Replies View RelatedDoes this slider work like the radius slider in high-pass filter in PS?
View 9 Replies View RelatedI have been trying to convert images to appear lijke B&W pen&ink drawings. I followed some instructions found on You Tube - (1) Duplicate Layer (2) Colour Dodeg (3) Invert (4) Gussian Blur and (5) Reduce Saturation.... However, when a layer is in "Colour Dodge" and I slide the saturation to -100, it appears to contain colour. Even though the opacity of that layer is 100%, the layer below seems to show through. The only way I can get it to go B&W is by also changing the layer below to B&W (or no saturation).
View 11 Replies View RelatedI have a file that is 31gb, have attempted to render to Blu-Ray 4 times. It keeps stalling at 6% - no change in the slider bar for the last hour, currently at hour 06:39 and counting.
View 12 Replies View Related(I am using version 2.6.12). I noticed that when I move the Opacity Slider, nothing happens on the image. I tried that on Windows, Linux (I am using Gimp version 2.6.11 on OpenSUSE 11.4), and Mac. I read somewhere that I need to go to Image --> Modify and select RGB. But it is already selected.
View 1 Replies View RelatedI'm new to scripting and i want to make a facial controller panel. but the case is when i want to change the morpher value by slider inside maxscript "" i don't know how to do that ""
View 2 Replies View RelatedWhen editing some images in LR4 the sliders in Basic are:
   Â
    Exposure
    Recovery
    Fill Light
    BlacksÂ
    Brightness
    Contrast
Â
With other images the sliders are:
Â
    Exposure
    Contrast
     Highlights
    Shadows
    Whites
    Blacks
Â
how to I set the app to use the second set of sliders?
My curves layer sliders seem to have been reversed. I would like the curves layer to show the black point slider on the left and the white point slider on the right.
View 2 Replies View RelatedI'm trying to determine how to change the color of an object based upon a custom attribute slider. It would only need to change between 2 colors. I know this can be done by simply autokeying but using a slider would be more useful for my situation.
Is there a way to do this? I've been playing with wiring a simple cube's material but am not sure how to do this.
I have trouble figuring out dash lines. If i change global scale factor or current object scale in a spedific paper space,
the other page will be affected...
When I'm editing pix, and need a quick large solid brush for a couple seconds, (1-inch dia), I slide "scale", but it's nearly impossible to manually rest scale back to default without restarting Gimp...
Can there be a dot-button beside scale that auto-sets scale back to default..? and/or a timer on scale changes that resets scale back to default after ten-seconds..?
when I exercise the opacity slider for an active layer I can see the full range of opacity follow the setting. Somehow I've gotten this v2.6 on a Linux box into a mode where the visible opacity doesn't follow the slider full range. Instead it is all or nothing. At 50% or less opacity the layer is entirely transparent and at 50.1% or more it is entirely opaque.
View 2 Replies View RelatedThere are a few things I just don't get about brush settings. Sometimes it seems my brushes go all wonky.
Â
When I change the settings for 1 brush... say I add some jitter to a smooth brush - then suddenly the other brushes get the same jitter applied to them.
Â
How can I set the brushes so that each brush has a different setting that doesn't change when I change any other brush settings?
Â
p.s. I also don't get why Adobe has you lock a brush by UNlocking it? Seems to me it should be the other way around?
I'm having a problem with the Blob Brush tool where I can't change the basic brush to something else. Whenever I pick a brush I want and I try draw with the Blob Brush tool, the brush I picked reverts back to the basic brush. Here are screenshots:
Â
I pick a brush that I like first
But when I start drawing with the Blob Brush tool, it reverts back to the basic brush automatically
Am I doing something wrong or is the Blob Brush tool only capable of using the basic brush?
I'm using a tablet with gimp and I want to be able to set the brush size for the paint brush and also for the eraser, separately. What happens now is that I'll set the paintbrush size to 10px, paint for a little while, turn the pen over to erase and the eraser will now be at 10px. So I'll adjust the eraser size to something like 50px, erase, turn over, and now the paintbrush is at 50px. Grrrrrrr... I tried creating new brushes for both the paintbrush and the eraser, but there's no brush size option. This is my first time using gimp so I'm probably missing something.
View 4 Replies View Related