GIMP :: Multiple Blends In A Picture?
Apr 22, 2012
I am trying to blend two pictures using layer masks and the gradient tool. I have seen a tutorial from photoshop which enables you to place one picture on the top of the other and using the gradient tool blend and expose the background from all corners of the picture, in fact any part of the picture. However when I try to do multiple blends in GIMP, the first blend works OK but when I go to do the second one, the first one is deleted. The photoshop example showed a ladies face with forest scene and waterfall as a background. In that example with the face in the foreground, it was possible to blend from a number of places from all sides and each time a blend was done, it would remain there even after more blends were done. Does GIMP have the same capability for doing this as photoshop?
View 3 Replies
ADVERTISEMENT
Apr 22, 2011
I'm new to using Linux based software and do not know how to stitch multi photos together to form a panoramic picture?
View 4 Replies
View Related
Feb 6, 2012
Is there a relatively simple, automated tool in gimp to apply one picture's environment lighting properties to another picture?
So for example if i cut out an object from one picture that has pretty warm lighting environment, and put it in a cold light background it will look pretty out of place obviously, and this is what I would like to resolve.
View 3 Replies
View Related
Jan 7, 2013
or how to position a picture in a specific location within a background picture.
View 3 Replies
View Related
Feb 12, 2013
What I want to do, is take the path tool, make a pattern around a picture (which is rectangle) placing it on a picture of a board like this...and then pull the picture horizontally, and vertically, to make it circular, to fit the perimeter of the board. If I understand it correctly, when you use the path tool...it allows you to make an image round (from rectangular) is that true?
View 1 Replies
View Related
Oct 27, 2012
I can find tutorials and plugins and such to convert a picture into a cartoon picture... but is there a plug in or way to go from cartoon to RL (real life image photo)???
View 1 Replies
View Related
Mar 13, 2013
I'm making background image for myself, and i know how i want it to be, but i cannot do it with my skills.
I have this "base" image that is 1920x1080 and i have to place there several (10-12) photos.
i want those photos to be different sizes and rotations and i also want them to have white border and some shadow.
I want those photos to be like in this image that i found from Google: What is the best and fastest way to do this in a gimp.
View 1 Replies
View Related
Jul 1, 2013
Whenever I export a vector containing blend groups from CDR x5 to AI , the corresponding AI file does not contain the blend group, rather a simple group of 50 objects that have to be deleted and the blending redone in illustrator.
View 9 Replies
View Related
Jul 19, 2011
is there a way to make a blend on an irregular object, for instance an object made with custom curves using the bezier tool. I can get it to blend with a circle or square. Here is an example, this is my website. URL..... I did the top graphic one object at a time.
View 4 Replies
View Related
Jun 12, 2008
look at the area that contains the globe. Behind it there is a blurred swirl of colours.
how this colour-blur/blend effect is achieved? I've tried blurring but it looks really poor.
View 9 Replies
View Related
Oct 29, 2012
How do I get rid of this twist in my blend? I've tried to rotate the rectangles to eliminate the twist, but it doesn't seem to fix the issue.
View 2 Replies
View Related
Aug 20, 2013
Why are my blends in Illustrator CS4 not saving or printing correctly???
SPECS:
Adobe CS4
MAC 10.5.8
I got a outlined Text blend with a drop shadow. And another text with a drop shadow on top. Not too complex at all. Heres some screenshots of the problem.
(1) Adobe Illustrator Screenshot
(1) Screenshot of my saved TIff file. I saved as a PDF as well and still no luck.
View 2 Replies
View Related
Dec 6, 2006
When I am adding blends or fillets to a 3D model, sometimes after picking a few edges I will inadvertently select a wrong edge. Can I deselect the edge and resume selecting edges for the fillets or do I have to start over from the beginning?
View 5 Replies
View Related
Sep 6, 2011
I would like to mix an orange and black color so that half is each and it blends into each but how do i do this?
View 4 Replies
View Related
Apr 9, 2013
I'm making a layout of 2 inch squares, 20 wide and 5 tall, to make color swatches for matching a target color. I'm then taking a starting value and using the edit colors>blend vertically, and blend horizontally to blend the color in the direction I think it needs. But every three or so blends i make it crashes the program, and even when I save my progress it crashes half the time. its a simple file just 2 inch square with color files.
I'm using CS6 on a osx10.6.8 ALL other jobs I've been working on have been fine.
View 1 Replies
View Related
Feb 21, 2013
I started to use Illustrator since CS2 and done heaps of shapes using the 3d feature.ever since cs5 and beyond, ive encountered a problem when ever I import or copy paiste from illustrator into Photoshop my 3d shape tends to have missing blend steps. I'm setting it to 256 blend steps to get a smooth transition but when i import my Ai into ps or copy paiste it notice that it leaves some small gaps in between the blends. Now does this happen to any other users?
On the left is illustrator using 3d and on the right is the copy paisted/imported Ai file,ive put a red shape behind the yellow ace of spade to make it clear that the red is noticeable.
View 12 Replies
View Related
Nov 3, 2013
I've been trying to extract the logic behind Xara's handling of multi-stage blends, but am having trouble.
Here's an example. I have these objects:
and create a blend between the left two
now, to continue with a multi-stage blend, I connect the bottom control point of the second object with the bottom control point of the third
All well and good. However, if I had tried to connect the top point of the second object with the top point of the third, like this (screenshot taken just before I release the mouse button)
Xara decides to blend from the first object to the third.
Eventually, by trial and error, I can get my multi-stage blends working, but it's inscrutable why it works logically sometimes, and why not.
View 5 Replies
View Related
Jun 13, 2013
When I use the blend tool for a smooth blend, the blends comes out jagged and horrible, as if it is doing a step blend rather than a smooth blend. I have used the tool before by either using the shortcut (Alt+Ctrl+B) or using it via the Object>Blend pathway and it worked out fine, but now Illustrator doesn't want to create a smooth blend.
What I'm trying to say is; is there an option that is causing this to happen that I may have accidently turned on, or has my copy of Illustrator gone into stupidity mode and I need to reinstall it?
I've attached pictures of what I mean with the settings I'm using and outputs. I hope your collective minds can smack this one in the face. I'm sure I'm doing something ridiculously simple to cause this.
I'm using CS5 Illustrator and my relevant PC hardware is listed below. - Intel i5-2500 3.30Ghz
- nVidia GeForce GTX 560
View 9 Replies
View Related
Oct 3, 2005
My camera is often used to take pictures in different events for my college. I am required to email those pictures to a person. But before I send them I must resize them all to 580 by 435. The way i currently do it right now is i go to "Image Size" and resize each individual picture from there. I was wondering if theres a way to just be able to resize all of the pictures in a folder to a specific size without having to do it one by one. it would make my life alot easier since its usually about 20 pictures at a time.
View 4 Replies
View Related
Jul 1, 2004
How can I print 1 picture on multiple pages. In Coreldraw 11, they have a printing option called "Mosaic printing".
View 2 Replies
View Related
Feb 4, 2008
I have 4 pictures of the Disney World Park logos (castle, MGM, Epcot, and animal Kingdom). What I want to try and do is merge all the photos into one photo that I can then print on T shirts for our family trip (18 people). I want each picture to be visible, but sort of merge into the other, like a collage I guess.
View 1 Replies
View Related
Mar 5, 2006
I need to cut up a single picture of many multiple headshots, into individual pictures. Cropping each headshot out would take a mellinium. Is there a way to make a grid of cuts and have photoshop then make an individual picture out of each of the small cut up squares (heads).
View 2 Replies
View Related
Mar 9, 2009
what I'd like to do is to select the edge of a picture, and then extend the colors that are present in gradient fashion, based on the colors of the pixels at the edge.
For instance, here's a picture of the grand canyon:
How would I extend the left side with gradients that would match the colors of the pixels on the left edge, and all gradiate to black? (I'd blur or something later so that the transition from the picture to the gradient start appeared smoother)
View 1 Replies
View Related
Dec 13, 2004
How can I automatically add different pictures in a single canvas using Picture package? i.e. I have about 48 pictures and I want to place 4 different pictures to each [10 X 8 - "4(4X5)"] canvas so that I can send all 48 pictures for printing at a digital studio. When I try, multiple copies of single picture appear on each canvas. I tried 'contact sheet' but not satisfied with the result as I could not change the length and width of the pictures.
View 2 Replies
View Related
May 29, 2013
1. Elements 11 Organizer often creates multiple copies of the same picture. How can I stop this?
2. Many pictures has a small questionmark in the upper left corner, stating that the file is missing, even though I can see the picture (a bit blurred, but still). What's wrong?
View 2 Replies
View Related
Nov 29, 2012
how can i print the same picture multible times on one page
View 1 Replies
View Related
May 17, 2013
I'd like to resite the picture I attached. My problem is that I want to do it without quality-loss. This way I probably have to increase the PPI. How to resize this way.
View 4 Replies
View Related
Nov 14, 2012
I need to know how to invert a picture. Not flip or reverse and not invert colors..
Exam 1: dog facing me...dog looking away from me.Exam 2: ship coming at me at a 45deg angle...(invert)... ship going awayat a 45deg angle.
Col. BlackJackBlackJack's Legion
View 2 Replies
View Related
Jul 17, 2013
How do I make a 4 x 6 picture? I went to resize and converted to inches. i then put in 4 x 6, but it kept popping back to 4 x 4.
I have never used this program before, and I thought it looked easy, but I am evidently not doing something right.
The picture itself looks like a rectangular picture before I pulled it up in Gimp.
View 14 Replies
View Related
Jun 10, 2011
I am trying to insert a picture of an individual behind a fence standing in front of a house. Is it possible to do this with Gimp? I have uploaded the two pictures. I want to put the handyman behind the white picket fence, walking up the driveway. Is that possible? I just downloaded a sample of this from Bigstock. I have not purchased it yet until I know this will work. Attached File(s) Bigstock_5673542 - Compressed.jpg (24.81K)
Number of downloads: 8 Craigslist Advertising Photo - Cropped.jpg (410.59K)
Number of downloads: 10
View 2 Replies
View Related
Sep 25, 2012
Any way to add signature to the bottom of my posts? I had a look in preferences but can't find way to do it.
I'm also trying to make an animated section to it that has a kinda electrical charge effect, or the flare that runs along a line of lit gunpowder, to the outer edge of the centre section - the bars that hold the name section and the name itself. I've tried a few basic animation techniques but not been able to close to effect I want.
View 8 Replies
View Related
