GIMP :: How To Restore The Default Dock
Oct 14, 2012
I can't figure out how to restore the default dock (may not be the correct terminology). This has the tools up top, and then, depending on what tool is selected, some settings on the bottom.
I've been in the windows tab trying to locate the dock and can't. Hitting "tab" on the keyboard opens another singular dock. I would like the original multifunction one that comes on install.
I even tried uninstalling and reinstalling, but it remembered my dock settings.
View 1 Replies
ADVERTISEMENT
Sep 19, 2012
I just loaded Gimp 2.8 from 'ppa:otto-kesselgulasch/gimp' with the idea of using the 'all-in-one' new arrangement. I am using Mint 13 Maya and the new gimp interface is not yet in the repository.
That said, having opened the 'new' gimp I see the docks arrangement is a bit different. Whereas there used to be two docks one on either side of the drawing area, now the right hand dock is split screen.
The problem is that just for say the colour wheel it uses loads of screen space. I know I can toggle between 'all-in-one' and multi-mode but they both have a split screen for the docks on the right.
I don't see any obvious way to move the colour wheel dock back to where it has been under the toolbox and brushes docks.
Maybe this is a fixed arrangement in 2.8, if so I will have to go back to my Mint 13 native version.
View 5 Replies
View Related
Dec 30, 2011
How to dock some tabs (tool options, layers, colors...) in the toolbox? or dock the toolbox in a multitab tool window with tool options, layers, colors.. ? would be nice to have only TWO windows: one for the image (without pollution), one "service" window !
This was possible in 2.6, but not (for me) in 2.7.4.
View 3 Replies
View Related
Jan 22, 2013
I saw it once & it appeared (by accident) on the left side tool box. All of the properties of the text - i.e. size etc was shown on the tool box. How do I make that happen again ? I am brand new to Gimp.
View 3 Replies
View Related
Sep 13, 2012
Sometimes Iwould close by mistake a tool dock by clicking alt-F4 a little toofast, while the dock has the focus, but I thought it was the image(and I wanted to close this image). Then the dock configuration (whichtools were set there, which tabs,size and position of the dock andtabs, etc.) is lost. So of course, I can always recreate the dock,reposition/resize it, set the right tools inside. But that's boring.
would therebe an option right now to prevent the tool docks from closing by theusual window-close event (so you could close them by the dock menuexplicitely, but not by quick shortcut for instance)?
View 6 Replies
View Related
Apr 6, 2011
I'm using Gimp 2.6.8 on Windows and, somehow, the Tool Options separated into a new window a week or so ago. I tried docking it back to the Toolbox, but nothing is working.
I googled and found that this is normally fixed by dragging Tool Options onto the Toolbox, but there is nowhere for me to do that. Is there some trick or maybe this is just a bug or something? Nothing seems to work and the separate Tool Options window is incredibly annoying.
View 4 Replies
View Related
Jul 2, 2013
I'm new here but an occasional Gimp user since v2.6. I have recently installed the latest version on my new tablet and I was configuring the layout of the docks and realised that there's no way to save different layouts so I could try alternative dock positions to find what suits best to my workflow, or maybe have different ones for depending on what I'm working on.
The only way I could think to achieve this could be to exchange Gimps preferences file, but where is that stored? BTW it would be a nice feature to add in future releases.
View 1 Replies
View Related
Sep 15, 2013
I'm a consistent yet still newbie user who uses GIMP in lieu of other photo editing programs. how to get my Toolbox and Tool Options to seam back together? I somehow pulled them apart, and when I click on 'Lock Tab to Dock' it does nothing, they're still separate.
View 1 Replies
View Related
Jan 6, 2014
When working in my GIMP 2.8 the default left dock had various tools at the top and Font tools at the bottom.
Somehow I changed the bottom to Airbrush tools. I tried resetting tool defaults. No luck I still have only the airbrush tools at the bottom of the left dock.
View 2 Replies
View Related
Jan 21, 2011
My layers dock has gone missing. According to the list in my 'Windows' tab, it claims to be open. I have looked all over the screen. I have switched on and off again etc. I have even deliberately thrown other docks off the screen to see if they come back to normal screen area if I close and reopen Gimp- and they do. so it isn't lost off screen.
I have unistalled and re-insalled and it has not come back.
1. Go to Windows>recently closed docks - Mine says 'empty'
2. File>create docks - I don't have this option- mine choices are 'new', 'create', 'open', 'open as layers', ''open location', 'open recent'... then a few which pertain to having an image open that you're working on... then 'quit'.
3. I went to Youtube and the tutorials on how to make your Gimp like Photoshop and how to get back closed windows also haven't worked.
I'm on Gimp 2.6.
View 4 Replies
View Related
Jan 27, 2013
Why will dock tool option not dock back to toolbox? I am using 2.8.
View 4 Replies
View Related
Jun 7, 2012
I can't get the Tool Options dialogue box to re-dock to the toolbar. I've looked at a few other threads, but they haven't worked. I'll attach screencaps if I need to.
View 6 Replies
View Related
Oct 19, 2013
I have a problem docking the windows. The tool options window somehow detached itself and I just can't figure out how to dock it again.
There are a couple of very light colored lines which are used for docking. I don't see any lines on the "Tool Options" window or any other window for that matter.
Ubuntu 13.10
GIMP 2.8
View 1 Replies
View Related
Apr 6, 2012
I'm new to Paint.NET and i just made a picture and adjusted the canvas size. I want to know how to restore default canvas size settings.
View 1 Replies
View Related
Nov 12, 2013
why doesn't gimp remember windows toolbar dock setup at the start on the left hand side and the right side?
View 2 Replies
View Related
Jun 12, 2013
I have some foreign drawings the block definition of "_ArchTick" has been changed to get a thicker tick in drawing's dimension. When I have new dimestyle and copy paste into the foreign drawings, it always use the drawing's block setting of "_ArchTick".
How I can paste a new dimstyle and bring in the block of "_ArchTick" to overwrite the one in current drawing?
View 5 Replies
View Related
Oct 21, 2012
How do I go about restoring, repairing or fixing the default materials and appearances that come installed with Inventor Pro 2013? I have a stand-alone single seat installation. SP 1.1 has been installed.
I tried to create a custom library of materials and appearances by making a copy of InventorMaterialLibrary.adsklib and renaming it. I then added new materials. Depending on project, I get nag messages regarding template styles in conflict with the library styles. I'm also getting message warning me that the InventorMaterialLibrary can't get loaded.
It is my intent to create a custom materials and appearances library that mimics the as installed InventorMaterialLibrary plus some additional materials and appearances. The custom library and appearances need to be available to all NEW projects and MAY be added to existing projects without getting the nag message about style conflicts.
I'm also seeing a behavior where the default appearance changes from standard light gray to the first appearance listed in the Autodesk Appearance Library, the 1.5 inch blue tile. I suspect that's the reason I'm getting the nag message. How do I fix this? How do I prevent this from happening in the future?
1) Restoring default as installed material and appearance libraries
2) Creating a custom materials and appearance library to contains ALL items found in the InventorMaterialLibrary plus new materials and appearances
3) Preventing nag style conflict messages
4) Preventing the default appearance of light gray to change to the 1.5 inch blue tile
The machine I'm currently using needs to be ready to go in the morning.
Product Design Suite Ultimate 2012, 2013 & 2014
View 1 Replies
View Related
Sep 19, 2013
I have just switched from PS CS5 to CC. Under CS5, the default for opening multiple images put them in separate windows. Under CC, the default appears to be to put them in separate tabs and one must select separate windows from the Window Arrange sub menu. How can I restore the CS5 default. I prefer to always open multiple images in separate windows.
View 2 Replies
View Related
Jul 5, 2012
I have AutoCad Lt 09 and have just installed Windows 7. Upon installing my AutoCad Lt, my customized toolbars all have clouds with question marks. In the CUI window, the Line button image is nonexistent, in the All Commands menu images don't exist for many of the commands, and many of the untouched menu buttons in default toolbars also have clouds with question marks.
View 3 Replies
View Related
Oct 13, 2012
I'm trying to restore a photo of my mother's sister that was taken on the day of her high school graduation. It's a group photo but here's the piece showing my aunt's face:
This whole photo had a lot of water (and probably mold) damage but the big problem with this section was that it was stuck to the glass. I managed to soak it off but it tore there, and of course that's exactly the part where my aunt's face was. Fortunately I also have a newspaper clipping showing the same photo:
so I do have a reference to go by. Here's what I'm mainly having trouble with:
1) the figure's left eye (on the right side of the face) - I tried the Clone and Heal tools but it just didn't look good so next I tried copying and pasting the other eye, flipping it horizontally, and rotating it a bit to try to get the angle right (I had to hold a ruler to the screen for that; does GIMP have a way to draw a slanted guide line that could be deleted later?). It's not bad, but it's not great either. That was when I remembered the newspaper clipping. I was going to copy from that, and amazingly they are almost exactly the same size (I measured the height of the face in each one) but being a printed piece it of course has dots and it looks awful when copied and pasted.
2) the skin tones - actually this is a problem with the whole photo; the skin tones range from almost white to very gray (actually all the grays range that way ; it's something I've been working on). But my aunt's face is the worst because it's not consistent, probably because of the tear. I've tried doing a free selection around the face and neck and experimenting with some of the color corrections - Auto Normalize and Equalize, Levels, Curves, Brightness/Contrast - but so far it hasn't worked much.
I can include more pieces, or even the entire photo. I just didn't want to take up any more space; I knew this would be a long post. Just let me know.
I am using 2.6.11 in Windows XP Pro SP3.
View 1 Replies
View Related
Sep 7, 2011
I am trying to restore old pictures. Some have scratches on them that I did not noticed until scanned into the computer. There is a cloudy appearance over the subjects in the pictures that I have not been able to get rid of. Is there anything that can be done to the photo before scanning? Is there any feature in Gimp that I can use to make some correction? Clone tool is not useful as there is not a good source.
View 1 Replies
View Related
Jan 21, 2012
I want to restore some photos, and I was wondering what format is the best for manipulation of the photo. My scanning options are: JPEG, TIFF, Bitmap, PNG, PCX, or Flash pix. My Output Resolutions are between 200 to 4800. I still have 532 GB free on my hard drive.
View 8 Replies
View Related
Dec 11, 2012
When I first downloaded gimp it worked great. Now the side tool bars are gone and I don't know how to restore them. I've attached a picture of what it looks like when I open gimp so you can see it's only the main center window that opens.
View 3 Replies
View Related
Mar 8, 2012
Have about 25 old pics, shot back in early 60's that I ned to restore. Find it strange that there is not a tutoral for this in GIMP.
View 7 Replies
View Related
Oct 15, 2012
Is it possible to have Gimp remember your settings from one invocation to the next? I get kinda tired of changing the pencil width from 20 pixels to 1 pixel each time I start it.
View 2 Replies
View Related
Sep 23, 2013
Have many slides which have turned redish - how to restore?
View 6 Replies
View Related
Aug 27, 2012
catalogs, I got error message about getting current drivers for hard drive. My hard drive is Western Digital which is supported by Windows 7.
View 2 Replies
View Related
Oct 8, 2012
I have a new computer and want to move the databse catalog over. I backed up in PSE 9 to an external hard drive. I connected to HD to the new computer and tried a resotre catalog. I chose "New Location" since I was going from XP to Windows 7 and was unsure if there would be a conflict with file locations. I also chose "Restore Original Floder Strucure". Very quickly I recieve an error message "Could not restor file .xml". I have run Restore Catalog several times and each time a DIFFERENT FILE receives the error message. I then disabled Norton Anti Virus Auto-Protect. I then disabled several programs running in the background. Same problem. I then copied the Backup Catalog to the new computer and tried to Restore it from there. Same Problem. I have now run a Repair Catalog on the original file. PSE states there is no error. I want to purchas PSE 11, but wanted to install/restore the database with the same version 9 first.
View 11 Replies
View Related
May 2, 2012
I have a capstone lab project due tomorrow for my graphic arts class and I made a HUGE mistake!!! I created an image using 20 something layers and did SAVE AS as a .xcf image (with all layers open). Part of the project was to save in different formats: .xcf (with open layers), a .png, and a .jpeg (optimized). So, I did the first save and then flattened the image to SAVE AS a .png with a different file name.
Long story short, I was tired and had way too many images open at once. When I was closing all of the images I accidentally saved the changes (flatten image) to my original .xcf (with open layers)!!!! Now, my .xcf that is supposed to have open layers only has one layer...the finished project!! I tried going to the file properties to restore a previous version, but it says that no previous versions were found! I also downloaded a norton "unerase" utility, but maybe I am not scanning properly to locate the file!?!
View 3 Replies
View Related
May 22, 2013
so i thought i was smart and created some new brushes. added them no problem (or so i thought) but to my dismay i cannot find my default brushes; the only available ones are those i created. did my saving the new brushes somehow delete the core collection?
View 6 Replies
View Related
Jun 28, 2013
My printer company is insisting that I convert my image to a CMYK profile.
After a bit of googeling it seems that a good generic CMYK profile might be ISOcoated_v2_300_eci.icc
And I found a utility to to do the conversion (URL]. However this utility wants to know what the source colour profile is. So, what does the GIMP use? I.e. if I create a new .XCF and paste in some images and do a bit of painting etc, and then save it as a .JPG, what profile will it be in?
Is the answer none? But I still need something for this utility. Or is it sRGB? There seems to be several variations.
View 3 Replies
View Related
