I happily used Gimp 2.4 and 2.6 for quite some time on my laptop.Now I have downloaded and installed Gimp 2.8 it won't open any files for me - when I try to open a file it returns an error message "no disc in the drive" about a disc drive I don't believe I have.I tried uninstalling and reinstalling (two weeks later) and the same bug recurred.
View 1 RepliesI am using GIMP 2.8.4, on a netbook running Windows 7 SE, with 1G RAM, and a 1.6GHz CPU.
Ever since I started to use GIMP 2.8.4, I get this "unable to read tile data from disk" prompt, and a tile in the picture is missing, frequently.
I attached a screen shot of the prompt.
Is this because of my hard-disk? or a known bug in GIMP 2.8?
Running a recently installed (5-6 days ago) 2.8.4 version of gimp. When I go to open a photo for editing, the program opens an error message window that says:
There is no disk in the drive. Please insert a disk into the drive \Device\Harddisk3\DR3
I have the option to cancel, try again or continue. All three options give me an "error sound" and the message window flashes at me. Only after I've forced gimp to close by right clicking the tab on the bottom tool bar...can I get the error window to go away. But it also has to be forced by the same method and not by using cancel or even the "X" in the upper right corner. I've used an older version of Gimp (on a different machine) for the last year; not to mention I used this version for a couple of days before this message started popping up. I work from/save all my photos to a flash drive, so I'm not exactly sure why the program keeps looking for disk.
I've been using Gimp 2.6 for some months now and beginning to get to grips with it. I load photos into Picasa and then process jpegs with Gimp. Upgraded to 2.8.0 a few days ago and hit a problem.
Using the new 2.8 system to to 'export' out to a jpeg file, when I go back to Picasa and make any change at all, which then needs a 'save' I get a Windows error message: "Unable to save all files due to a disk error. The disk may be full or read only".Files not Gimp 2.8 processed are fine.
2.6 no problem - 2.8 problem. I don't think it will be Gimp bug, but there is an associated change which has 'upset' my computer.
Windows 7, had everything working fine. Added SSD and installed system from scratch on SSD. Old drive is now my second drive.
Trying to put the scratch disk on the second (old) drive to reduce wear on the SSD. But every time I do, I get the disk error message and it erases all my settings (so annoying!)
I figure it's a permissions thing since I've had to deal with that already to some degree, but I don't know how to fix it since I don't know where adobe is trying to save the scratch file.
so i recently restored my computer back to factory settings .. so my computer doesnt even have any new downloaded app .. i download photoshop cs6 now im getting scratch disk errors ..which i dont see possible if my computer doesnt have anything on it (besides what it came with) my hard drive has 276 gb i only used 33 . i made an external hard drive and that has 8 gb ... also its moving very slow .. also its telling me i cant make an new canvas size 1920 x 1020 with an resloution of 300 .. im using windows 7 Toshiba
View 3 Replies View RelatedWe are in AutoCAD Civil 3D 2012. When we try to change something in a layers we created and it is telling us the layer is read only. The other day I shut the program down and reopened it and it started working. Today the same thing happened. What has caused this one layer to be read only?
View 0 Replies View RelatedThis document has been damaged by a disk error. The most likely causes of this error are: a defective disk drive, a defective disk drive cable, or incorrect peripheral cable termination. Some of the pixels in this document may be invalid.
View 5 Replies View RelatedSystem specs:
MacPro3,1
2 x 2.8 GHz Quad-Core Intel Xeon
OS 10.6.8
18 GB RAM
NVIDIA GeForce 8800GT graphics card
Photoshop 12.1 x 64
So I just purchased and installed my first copy of an Adobe Suite and now I can't print. Back story: I had CS4 on my machine from my last job and it printed fine. When I lost my job, I went the legit route and installed the demo for CS 6 until I was able to aquire my own copy. CS 6 also printed fine.
I found a version on eBay of CS 5.5 and was eager to install. Yes, it is a full legit version with original disc and packaging; the seller even went so far as to have the liscence transfered over to me. I used the "AdobeCreativeSuiteCleanerTool" to remove all previous versions before doing a clean install of CS 5.5. Everything else in the suite seems to be running normally except printing.
I've looked on the forums and tried several of their suggestions to no avail:
1) I tried changing the "Color Handling" in the print options box.
2) I tired running it in 32 bit mode.
3) I tried fixing permissions.
4) I trashed my preferences and tried the Shift-Option-Command trick
5) I updated the Adobe software (no updates for Photoshop)
6) I reinstalled my printer drivers.
I just printed last night from CS 6 and now no luck today.
if i add a external drive to my macbook air will it stop the scratch disk message from coming up each time i try to use photoshop cs6?
View 3 Replies View RelatedLately when I try to crop an image in Photoshop CS2 (9.0.1) I get the message that the function could not be completed because the scratch disk was full.
I only have a "C" drive and I have over 15 gig free. I have optimized the hard drive and that didn't do anything . Can someone help me with this problem?
What does it mean when I try to open a file in photoshop and get a scratch disk error. And how do I stop it from keep hapening again. I try to solve it by purging out stuff.
View 3 Replies View Relatedi cant find the folder of the
scratch disk files...
I have had Photoshop CS5 installed on my system for over a year, and it worked fine all this time under Snow Leopard. Now that I've upgraded to Lion, Photoshop will not open due to these messages:
-Could not open a scratch file because the disk is unavailable.
-Could not initialize Photoshop because the disk is unavailable.
The scratch disk in question is an 80gb partition of a 1tb internal hard drive. If I delete the preferences file (by holding down cmd-shift-opt when starting PS) then it starts up just fine. If I go into preferences and reset it to use the scratch disk, then next time I try to reopen the program I get the same 2 error messages and I have to ditch the preferences again.
There is nothing wrong with the disks, I verified them. And anyway, I've been using that scratch disk with Photoshop for the last year with no issues. It was only after I switched to Lion that this started happening.I need to be able to take advantage of the performance increase that a scratch disk offers.
Recently I have been receieving the following error message when Photoshop CS6 x64 srtarts up on my Windows 7 machine. Ps resides on my SSD.
I don't always get the message but when I press X, Cancel, Try Again, or Continue the message repeats until finally Ps starts. I'm not sure what drive DeviceHarddisk3Dr3 is supposed to mean.
photoshop cs6 was working fine a few weeks ago. After not using it for about 2 weeks, I try opening a RAW file and I get this error every time. JPGs open and work fine. I have extensively searched on the internet for solutions and have tried everything such as: disk checking, deframgenting, playing around with photoshop preferences, deleting temp files, resetting preferences, clearing disk space. I have assigned two hard drives for photoshop, one with 16 GB free and the other with 8 GB free.
View 8 Replies View RelatedPhotoshop CS4 will not open, when I try and open it I get "An unexpected and unrecoverable problem has occurred because of a disk error. Photoshop will now exit." Bridge is working fine?
View 14 Replies View RelatedI am now getting a unspecified error when I try to create a disc. It tells me to:send the file C:documents and settingsxxxlocal settings empvstudio_14.0.1.3_20101220_083832.DMP to tech support. Trouble is there is no technical support unless I have a paid subscription. I cannot read the file because windows xp will not recognize it. I see nowhere on here that I can attach the named file.
View 14 Replies View RelatedI'm getting this error when opening two specific PSD files in Photoshop CS3 on Windows XP Pro:
"This document has been damaged by a disk error..."
I've been testing hard drives and memory, as well as looking at other files, and as of now I think it's not a systematic problem; rather, I suspect that these two files were damaged when migrating from my old computer.
I have two questions for anyone out there who has troubleshot this issue before:
1. One of the files has a violent green stripe 50-100 pixels wide in Photoshop, but when opened in Gimp it looks fine except for two individual pixels that are pure green. The other has a blue stripe across it in Photoshop, but looks fine in Gimp. (I am comparing specifically the background, without any layers.) Why would the Photoshop and Gimp views of the same image differ so widely?
2. Does anyone know of a script that can check all files for this error? Sitting there opening all of my thousands of PSDs one at a time seems like a royal pain, and something that could be automated by someone who knows how...
I am trying to save a rgb tif file (file size is 31mb) with a single layer that was applied since opening, the only way I am being allowed to save it is if i flatten the image, which i do not want to do. When I try to save it I get "Could not save "leeo083.TIF" because of disk error.
I am on a Dual 2 GHz G5 with 3 gigs of ram OS 10.3.5 There is 40 gigs of open space on the harddrive. Photoshop CS the file is located on the desktop and I am attempting to save it in the same folder.
I have tried save, save as and get the same error.
Lately I get this error when trying to save a JPEG or TIFF.
As far as I know, other formats save just fine.
Anyone know whats going on?
I get this message when trying to save files in Photoshop CS2. This happens about 90% of the time when I try to save or save as. I have to save to the desktop or another folder for it to work.
Message I get: "Could not save "Name.tif" because of a disk error."
I have Lightroom 3.3 on a Windows 7 x64 machine. It's started to throw a disk critically low warning every few days for the drive that has my LR catalog on it. The drive has 390GB free .
View 15 Replies View Relatedi have downloaded the trial version to test ps.when i click save it exits Photoshop..and after about 15 minutes a error comes up and it says "memory could not read"
View 5 Replies View Relatedi had CS3 running fine for as long as i can remember.. (on winxp pro sp3 32bit)
then all of a sudden today when i try to start it.. it opens and the splash screen comes up, then when it gets to 'initializing palettes' i get an error that says etc etc memory cannot be read...
i uninstalled, ran the cleaner, deleted all cs3 folders in docs&settings.. reinstalled.. same problem ...
IM having a problem with my xara file... it gives me a read error occurred.. i tried to solved it but i failed, although i can see it in preview and no change in file size..
View 9 Replies View RelatedEverytime I try to save a file in PS it tells me I can't because the disk is full.I have to save it to the desktop and then cut/paste it into the folder I want.So annoying and time consuming! been doing this for months. How can I correct this?
View 12 Replies View RelatedThe crashes always occur while editing a photo in the Camera Raw editor in Bridge (most of the time they are JPG files, yes you can edit JPGS in the Adobe Camera Raw editor) and then hit the "Open Image" button that will open the image in Photoshop. Often Bridge, Photoshop and InDesign all are "not responding" and have to be force quit.
Always when I'm editing a photo in Photoshop that is on a server I get the " Could not create a preview because of a disk error message" which I have to hit the OK button to clear. I just tested this several times and I never get the disk error message when editing an image from my hard drive. I suspect there is a network communication problem.
MacBook Pro 15" Early 2011
2.2 GHz Intel Core i7
8GB 1333 Mhz DDR3 RAM
AMD Radeon HD 6750M 1024 MB
OS 10.8.2 (12c60)
Photoshop CS6 at opening...What am I supposed to do with this??
View 1 Replies View RelatedI am trying to burn a non-HD project onto a Blu-Ray Disk and every time after the video/audio stage I get the "unspecified error" message. I have now wasted 6 Blu-ray disks trying to solve this problem. I have reloaded the software and uploaded the patch. I have checked and all my drivers are up to date.
Files are not corrupted as I have checked. I have even tried this on a 16 second video and it fails. I can burn it to DVD but the quality is poor. I have tried reducing the speed to the lowest setting at 4X. It is writing to the BD-R as mentioned but the content is not recognized. If I write it to a Blu-ray file it appears to work.
I draw, or even add text to an object this always pops-up:
Disk Error- 108 occurred while reading or writing to a scratch disk. this error is unrecoverable.
What can I do about this? This has NEVER hapenned before.
I'm on a Compaq Presario PC, OS: Windows XP Home Edition.
I am using Photoshop CS2.