CorelDRAW X6 :: Printing More Than One Object Changes Colors
Sep 10, 2013
A single black filled square prints perfectly. When I place a color filled box beside it in the document and print, the black prints greyish.
As a workaround I am publishing to pdf and then printing is fine. Other programs (paint) prints correctly.
I have a fiery controller on a Canon Imagerunner Advance.
All my print jobs were working perfectly sunday night. Monday morning they were not. I re-installed Corel - no effect.
View 3 Replies
ADVERTISEMENT
Oct 9, 2012
I was making a bussines card, colors in corel looks perfect, exported to pdf file colors stays the same, but when i try to print all colors are off. Deep purple turns pink and black fading objects tuns into lines. Furthermore, when I use 'collect for output' pdf preset 'prepress' colors are off to and when I try to use 'current proof settings' corel just shuts down.
colors in corel
colors in pdf after 'colect for output'
and when I print it, colors are way more off, you can't even see the red, because all purple turns pink.
View 6 Replies
View Related
Oct 13, 2011
How do I ensure that I'm printing accurate colors? As color is so subjective how do I confirm that I have it correctly?
View 6 Replies
View Related
Jan 17, 2012
How do I separate colors in the object that is power-clipped?
View 8 Replies
View Related
Jul 29, 2011
I am using CorelDraw X4.
If I place a filled circular object with an attached drop shaddow on top a colored background, it appears as I expect on my monitor. If I print it, the print preview still looks correct, but the actual print shows a white rectangle below the circle and above the shaddow. It blocks part of the shaddow.
As viewed on monitor -
As printed -
View 14 Replies
View Related
Apr 18, 2013
in Corel X6, some spot colors, either pantone,custom or others, after re-opening files, these colors appearas NO NAME, and the object assigned to them appear withno fills?It never happens with RGB or CMYK colors.
View 1 Replies
View Related
Aug 16, 2011
How do you color the outline of a closed object in different colors in Draw . I have a green triangle which is part of a witches hat....... I have colored the outline in the same green as the fill but I would like to keep the bottom line (curved) black to define it against the hat brim. Is there a way to keep this line black when I make the others green......otherwise I have to draw it in again.
View 5 Replies
View Related
May 7, 2013
having trouble transferring image to cut studio for opaque transfer paper to be cut on Roland after. Do I need to convert the file to bitmap then open the CutStudio? When I do, it does not appear. If I leave it as vector it does, but I cannot get the option to outline object or use the print/cut setttings. I seem to be missing some steps.
View 1 Replies
View Related
Jan 14, 2012
not being able to change colors of an object while using the Interactive Fill Tool? That is, change an existing color or add/delect a color to the gradient. I have to delect and reselect the object to change colors. I have to do this each and every time want to make a color change. Without this functionality I am not sure what the point of the tool is.
View 14 Replies
View Related
Apr 3, 2012
CDX5: Whatever color I select for fill or outline is now set as the default color for fills and outlines without expressly setting it as such. Until now when I left or right click a color with nothing selected it allowed me to set it as a default fill or outline color for graphics, artistic text, or paragraph text. It does not do that now.
Is this a "feature" that's been added that I somehow enabled? In any event, how do I turn it off?
View 2 Replies
View Related
Aug 24, 2005
I'm doing a graphic for a box package in Illustrator. The background color is the #333333, with big words in grey using #666666. When I brought the image to a print shop to test it, the colors turned out kinda greyish green. The print file is in CMYK. Any ideas why this happened? and how do I fix it?
View 2 Replies
View Related
Nov 8, 2012
I recently updated my operating system to MAC OS 10.8 and as a result, Photoshop 5.5 no longer prints colors accurately. I corresponded with the tech department at Adobe for more than a week and we determined that my user settings did not migrate properly when I upgraded, resulting in skewed colors when printing from Photoshop. In running tests, we made a new "root" user and Photoshop printed correctly when using that user. How to fix my user settings/profiles so that my paper and printer profiles operate correctly in MAC OS 10.8 when printing from Photoshop?
View 4 Replies
View Related
Feb 5, 2013
I only do photo quality prints to Epson matte a few times a year so I run test prints with various settings to get what I want. My granddaughters wanted some prints from a web site framed and my wife wanted prints of an emailed photo of their old mountain cabin. I had to do some color manipulation of the cabin, but the web site images had been expertly processed and all I had to do was print properly.
I experimented with the cabin image print settings. Epson changed the names of all their papers, so the Epson print profiles in the print dialog didn't match the name on the matte paper box. I deciphered that, but I wasn't happy with the result so I tried two of the other Epson profiles and hated it. There's quite a long list of profiles available, some specific, and some just conventional color spaces like sRGB, aRGB. For the heck of it I tried Pro Photo RGB as a printer to paper profile. The print of the cabinimage with an embedded aRGB profile was everything I could want. I did the web site sRGB images the samwe way and they were really nice.
The puzzle is this: What does using Pro Photo RGB as an instruction to the printer cocerning what it is printing to thru Photoshop even mean? The printer has never heard of the colors possible in Pro Photo, and the source image is in sRGB ( verified by Photoshop). I can conceive that an RAW image should be rendered as aRGB for inkjet and that the inkjet has some blues that are outside the aRGB, but I can't understand telling an inkjet to use Pro Photo to print sRGB.
View 23 Replies
View Related
Dec 17, 2008
After changing picture to black and white or any other color change the picture will print some of the original colors especially greens and tans. This occurs when changing a jpg file or using layers. It did not happen in CS2 using the same Epson printer and the same printer settings.
I am using Vista OS.
View 1 Replies
View Related
Apr 27, 2013
I have CS6 and a Savin printer. I have recently run into issues of it turning my projects a funky shade. I took the file to the office store and it printed fine for them. My printer is printing other jobs great but the trouble just appears with PShop.
View 1 Replies
View Related
Jul 24, 2013
I have been printing with an epson [artisan 50] for a long time, always great colors on my pc.
just switched to a mac and latest version of ps cs6 and my prints are not color correct [very muted colors on the print] It is definitely not the printer [prints perfect from otherc applications]
I have tried many of the settings / color management options, but none seem to do the job. Right now I have it set on 'photoshop manages color' and then for printer profile my printer type with correct paper.
I don't know what to do- share their knowledge on color management/printing
View 1 Replies
View Related
Aug 20, 2013
I have been using Photoshop for years, and as far as color management, everything has always been pretty true to what i see on my monitor. Recently however, pictures look good in Photoshop, but when i upload them to the internet, or print them the colors are muted and have a gray cast to them. I have tried using different color proof settings based on the labs I use to print, but it always ends up the same.
I have used both sRGB and AdobeRGB on my camera, both have the same result. I don't know what changed, if I changed a setting inadvertently.
View 12 Replies
View Related
Dec 26, 2013
I recently upgraded my computer, and use the same AutoCADLT 2012 software I used on the old system. However, now when I print drawings or make pdfs, they are in color instead of black and white. And the pdfs in color now copy in such a way that some of the layers appear faded, are very light, and are difficult to read. How do I get the prints and pdfs back to black and white, with no color?
View 2 Replies
View Related
Jan 11, 2013
I have a problem when I print documents regardless of the printer I use.
If the document is on the network, colors are printing in black.
But if I copy this document locally on my computer, colors are printing normally.
Note : I'm using AutoCAD 2012 LT
View 7 Replies
View Related
Jun 27, 2012
I'm relatively new to Illustrator (I'm a fine artist not a graphics professional) and having some difficulty with preparing pdf files for screen printing positives.I passed some of my photos through Vector Magic anf got a 3 color vector pdf.I converted the colors to global spot cmyk.What I need to do is get each color onto a separate layer. I don't have a postscript printer and would like to have everything prepared before I take artwork to a print shop to get screen positives printed.For some reason when I go Select > Same > Fill color (and either cut to a new layer or select inverse and delete on a duplicated layer) I'm not getting everything showing up. It looks like the document needs to be flattened or something, though I have tried that with no effect.
View 4 Replies
View Related
May 1, 2004
I bought a new computer and got Photoshop Elements 2.0 with it. Great program. My problem is a friend said that Photoshop 6.0 is better. I asked to try this program . I loaded his program on my machine and started to print. All of a sudden my prints appear to be pinkish color and no normal colors. I looked on the web for an answer. Could this program be illegal and something is changing my colors?
View 9 Replies
View Related
Feb 3, 2012
How can I print in black and white while using true colors? I've tried the monochrome ctb, monochrome stb, looking for solutions in these forums, etc. The std 255 colors are not a problem. It is only when I use a true color. When I tried the monochrome stb setting, the fill color on my multileaders did not change.
Also, in paperspace, with viewports that had solid objects in them, I used to be able to print and have hidden lines removed without them showing up that way in the viewport. (used 2008 at the time and have jumped from that to 2012)
I seem to remember that the was a variable command that controlled this but I can't remember it.
View 2 Replies
View Related
Nov 12, 2013
I run an online wedding invitation design business. I first create the digital files of the invitations in Adobe Illustrator CS5, then secondly I email the PDF file to my customers, and finally the customers are responsible for printing the invitations themselves. Some people print from a home computer, some have a local print shop print them (professional OR places like Staples and Office Max), and some upload the design to an online print service.
I use Adobe Illustrator CS5 and cmyk colors to create my file.
2 times this year I have run across a problem that I don't know how to fix. The customer says that when they print the PDF at home AND at a local print shop (Staples or otherwise), the colors are not right. Specifically, my Peach color was printing Brown for her, and my light Pink color was printing Tan for her.
The first file I sent her was a PDF that I created from Illustrator. I also imported the .ai file into my Photoshop Elements 5.0, and then saved it as a JPG and PSD. Those two printed the same results for her. She printed from home and from Staples. Both printed wrong.
I have made 250+ sales in the last 12 months, and this is only the second time it has happened.
View 15 Replies
View Related
Nov 2, 2011
I just bought a Canon Pixma ip4920 printer, and I use Paint Shop Pro X4 - the problem i'm having is that what I see on scrren and what I get when printing a picture are totally different. My computer is a Dell Inspiron laptop. How to calibrating the colors to match?
View 8 Replies
View Related
Aug 17, 2012
I would like to acheive this:
Is it possible to have some kind of calc mode or another technique that would allow me to have an object that I could move around without having to "magic wound->recolor" each time?
View 3 Replies
View Related
Dec 14, 2013
Resizing objects is a mess in CorelDRAW X6 when objects are outlined with Scale With Object enabled to retain proportions after resizing.
None of the tools dealing with outlines (e.g. Contour or even Outline itself) continue to work properly after resizing the object.
I strongly suggest to recalculate outline property values after resizing if Scale With Object is checked. Don't just do it hidden somewhere internally in the object model by applying a temporary scaling factor. Instead actually recalculate the actual property values if Scale With Object is checked.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
View 9 Replies
View Related
Sep 17, 2011
have to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object
View 2 Replies
View Related
Dec 9, 2012
Is there a way to exclude single attributes from being defined in a object style? As example: i want to define an outline that does not change width of the objects, but everything else.
There is a small tick box right of every attribute with help text "None this object attribute is not defined by a custom style" but i can not mark it. My feeling is, that i need to switch on this tick box to get the result i need, but i can not. When i click on it, it just gives me a greyed out "Revert". When i try to make child styles, there is a way to break the connection to parent style with these tick boxes, but no luck.
Is it a bug? I tried it with X6, X6.1 and X6.2
View 1 Replies
View Related
Jun 10, 2011
For example, on a vehicle the rubber tires, the wheels, the body are all different colors/materials. What's the easiest way to accomplish this?
View 1 Replies
View Related
Apr 3, 2012
4621.CorelDRAW Clone Bug.mp4
Trim the master object and the cloned object gets deleted.The master object cannot be directly trimmed, so I grouped it with another object, which seems to enable the shaping tools. check if this behavior exists in X5 also.
I have inserted a clip about the problem. Maybe other users and the Corel staff will check it out.
View 2 Replies
View Related
May 6, 2009
I have a group of several objects – text box; rule line and some colored rectangles that act as jigs for someone to develop a layout. I do not want the jigs to print. Is there a way to suppress printing for just certain objects or make certain colors non-printing? Note: Non-printing layers will not work because the grouped objects puts everything on the same layer and I need the text and rule lines to print.
View 3 Replies
View Related
