If I draw a 10*10 rectangle, then rotate it by 45 degrees, Shape.SizeWidth returns 14.14.How do I get the original 10 in VBA?
CorelDraw shows 14.14 in the property bar, but shows 10 in Object Coordinates - that is the one I'm searching for.
I need the same for an ellipse.
This morning line width in the Object Properties flyout were in points. This afternoon they are in mm. Where I can change it back to Points.
I've had this happen before and I understand it is probably something I'm doing but it is frustrating that these options are not obvious.
Question #2 - Is there some way to reset all possible settings/options/configurations back to the original defaults? I'd like to go back to the way things were when I first installed X3.
Why Corel Draw does not preserve original JPG size defined ie. in Photoshop.
Instead I think Corel Draw looks at the DPI and then maybe opens it as native monitor dpi I don't know but I spend ages to make JPG to size in PS to them make layout in CorelDraw and it was all wasted because I need to resize them back in CorelDraw.Graphic Designer, Web designer and playing with Video and Audio mixing and editing as well ;-).Working for Large Format Printing company Carrick Signs.
[ Bug ] Exporting to .GIF does not keep its original sizeThe checkbox 'Maintain Size' checked.
Result: importing that .GIF is 5 time size bigger.
I have PDF map created with latest PDF Creator. Originally it was made with GIS software Geo Media Professional (v6). Document looks good while previewing with Reader. When importing to Photoshop CS5 - looks good to (but raster). But when I'm trying to import it to CorelDrawX5 strange things happens:
Import takes a lot of time After hitting [Enter] file (group name.pdf) origin is about 5000mm;6400mm (width 45720mm, height 45720mm) - so it is definitely far from any page and much much bigger than original - in this case original was 2500mm width and 1067mm height landscape prepared to print on HP DesignJet 800PS 42'' roll hitting F4 - max range warning appears. I was trying to move group somewhere in visible work area using X,Y - strange results - negative position appears after hitting Enter
In CorelDRAW X4 I didn't get such "feature". There is no additional font embedded in document (ARIAL, HELVETICA).
help_gdg_1.cdr
I need to make the gradient fill look just like the original. I already created the vector (attached)
(Next to the blue arrow it is actually a green gradient.)
Recently upgraded from X3 to X6. Just discovered there is no place on the property bar to change the size by entering a percent of original size. It was located next to the actual size in inches.
I did Ctrl-J and tried to find it in the customization, but came up empty. Surely this feature still exists?
I am adjusting colours on photos with Photo Paint X6. When I try to save with original settings the OK button in the "Export to JPEG" dialog box is grayed out. There are no error messages or hints on the screen as to what to do to proceed with the save JPEG with orginal settings.
View 7 Replies View RelatedI'm using Corel Draw 12 and on some of my computers, if I resize or flip an image the original image remains on screen as well as the resized or flipped version. On other computers it doesn't happen.
View 2 Replies View RelatedI am an freelance designer. I want original files of some designs which are posted in gallery. Is it possible to get the original files.
View 4 Replies View RelatedWhen you select the option to apply any changes & overwrite your original photo does the program attempt to try to a default setting to keep the picture approximately the same size as it was before? (assuming that you haven't cropped it) If it doesn't default to a size automatically can is there an option to do so?
View 4 Replies View RelatedI had posted in another thread about wanting to clean up a signature and make it look more font like. I tried that and it seemed to be pretty difficult due to the amount of random in a hand written signature.
So I think I'd like to approach this from the other direction. I have a font I like but I don't want it to look like the font (way too common). Is there a way to alter the font (not the entire font set or even to create a new font but just for a one word Logo)?
I'd ideally like to connect two of the letters and also modify the shapes of the letters just a bit.
I just finished a logo design in corel draw x5.The design was made on a a4 dimensions.I copy the elements to paste them into a much smaller canvas but the image when minimized is pixelated not vectored as the original.
How can I paste the image and the image is as the original (vectored)?
I've got a bitmap image and I forgot to save the psd...
Anyway, on the bitmap is a certain colour which I got by changing the opacity of the original layer which had this colour.
Now, I want to get the original colour - before the opacity change. Is there a way I can calculate this? I really need the precise colour.
How to get the original ppi of a raster art?
View 1 Replies View RelatedWhile trying to import 1 photo I ended up importing my whole folder of raw photos. I want to keep my original as raw photos and then save the photos I edit in lightroom 4 as JPG and TIF's. Can I save my photos that were imported back to the original file as raw.
View 3 Replies View RelatedLightroom 5.2
Windows 7 Pro
In Lightroom 5.2, where did my original RAW photo go? All my original photos are in the RAW file format.I sent the photo to Portrait Professional using "Edit a copy with LR adjustments," but didn't like the way it looked there and I discarded that.
I may have sent this photo to Photoshop CS6 in the past, I don't recall doing so, but it's possible. If I did, I didn't do much, if any, editing on it. Anyway, now in the LR filmstrip, I have a tif copy and a psd copy. The original RAW seems to be gone. It's not in the Recycle bin.
I have a signature on a piece of paper which has been done with blue pen. It has been scanned at resolution of 600x600 dpi. I want my signature to look like original one after printing. Is it possible? There is a plenty of tutorials how to do that with normal black pen or how to do transparency etc. I need signature which looks like originals blue pen.
View 8 Replies View RelatedUsing Photoshop CS6, I opened a raw file in Camera Raw and made some adjustments. Then closed the file without opening it in Photoshop. I opened the same file in Camera Raw again and it remembered all of my adjustments. I want to reset the raw file back to its original before I made any adjustments. Is there a way to do that without having to go through each setting and changing them one by one?
View 5 Replies View RelatedIn the past I have almost always used Nikon's Capture NX2 as my RAW editor. In that, it's immediately obvious how to get back to the original NEF camera image, or even choose to go back to different stages in the editing history.
There seems no obvious way to do this in ACR. For example I made a mistake in a RAW edit, but when I reopened the RAW image again from Bridge I got the edited version with the unwanted error., I would like ACR to do what Nikon Capture can do.
I have also just found that, when trying to assign a keyword to this file in Bridge, I got got an "...error writing metadata" message. All the other NEF files in that folder (none of which have yet been edited in ACR) accepted the keywords with no problems.
Since writing the above, I have found that this "error writing metadata" is a common issue for which there seems no solution - it extends back to earlier versions of Bridge (I have CS6 64-bit with vety latest updates).
I need the word "JUVENILE" replaced with "MAGNOLIA", and "CHILD" replaced with "GHOST" also "WILL SMITHS GHOST WRITER" completely deleted. I need the replacement text to look exactly the same as the original.
View 8 Replies View RelatedI seem to have lost the original files associated with the Sample Library. The location exists but the individual files are missing. I have the disks for VS Pro X5 Ultimate and I reloaded the program but this did not restore the files relating to the Sample Library. How to recover these files?
View 8 Replies View RelatedI have changed the color of some of the xref file layer in my drawing manually from the layer manager. Is there any way of getting the original color back without detaching and reattaching the xref's in a quick way?
View 3 Replies View RelatedHow do I open or place a new layer BELOW the ORIGINAL. I have tried dragging and that doesn't work. I have tried control/click when I create a layer and that doesn't work.
View 8 Replies View RelatedSomehow I have changed settings and when I try to use any of the tools on an image it does nothing. ie- using eraser, healing brush, clone stamp - nothing happens. I reset the tools, checked that layers is not locked, etc. I know it must be something dumb - I just can't find any reference in the book or on the knowledgebase.
View 2 Replies View Relatedi want it back to the default setting or original setting.
View 1 Replies View RelatedI'm trying to save a gif. but if I save optimized, it makes the colours go weird. I just want to save the original but photoshop isn't giving me that option!
View 8 Replies View RelatedHow to get this effect from an original photo? Using photoshop only..
[IMG]C:Documents and Settings
usselchDesktopNew Folder[/IMG]
I open an image in ACR, make adjustments to it.
I open the image in Photoshop, and make a Duplicate.
I close the first image (Not the Copy), and select "NO" for "Do you wish to save changes"
I go back into bridge, and view the RAW file, and though I selected "NO" for changes, the image retains the changes/adjustments made in ACR.
Is there any simple way to return the RAW file to the original state as it appeared prior to ACR adjustments?
The only way I've found to do it is to keep separate files of the original RAW files on another drive.
I am using Photoshop CS2 and have windows XP.
I want to create images that simulate original artwork such as oil paintings so that the images show brush strokes, layers of paint and paint blobs?
I intend to print the images onto canvas to simulate original artwork.
I'm new in Paint.net. I have used a little bit photoshop. I need to create photos like this URL....So I need to create new background and edit people also so they match with the background. I think i need to remove the original background first, but what do i have to do after that?
View 2 Replies View Related