Somehow I have changed settings and when I try to use any of the tools on an image it does nothing. ie- using eraser, healing brush, clone stamp - nothing happens. I reset the tools, checked that layers is not locked, etc. I know it must be something dumb - I just can't find any reference in the book or on the knowledgebase.
View 2 RepliesMy cloning stamp is suddenly doing things differently, but I didn't knowingly make any changes, so I'd like to reset the program to its original settings but I don't know how.
View 2 Replies View Relatedi click on the brush and change its color and or size then, when I go to paint it goes back to previous settings. (after that I can change its setting and it will work, but I always have to make a mark with the settings I don't want before I can change it to desired settings)
View 1 Replies View RelatedI recently switched from Civil 3D 2012 to 2013 student version because when I initially installed the program I probably messed up some of the settings that I shouldn't have for my entire application. After reinstalling it, I noticed that the program seems to run just fine but the settings for the original file I'm trying to work with remain, such as label settings, linescales, etc.
I want my drawing to match the settings of new drawings when it comes to labels, scales, and anything else I might have changed. Is there a way to apply these settings to my original file? If not, is there a way to at least make sure the label styles can be reset? I don't want any changes to the settings I made to be present in my file.
I have been working on a file in photoshop cs5 that had come from lightroom 5.3. This was then saved (automatically becomes tiff file in Lightroom). I then wanted to make some more adjustments to it in lightroom (using local adjustment clarity). I then tried to copy the settings of the adjustment brush from the tiff to the original raw file. This is where it gets very strange. The adjustments are copied but they are rotated ccw by 90 degrees! I can replicate this every time.
View 22 Replies View RelatedWhen you select the option to apply any changes & overwrite your original photo does the program attempt to try to a default setting to keep the picture approximately the same size as it was before? (assuming that you haven't cropped it) If it doesn't default to a size automatically can is there an option to do so?
View 4 Replies View RelatedPhotoshop CS5 v12.1.
Mac OS 10.6.
I'm printing to an Epson R1800 printer.
Print. Choose Color Management. Choose Document. Choose "Photoshop manages color". Choose the correct printer profile that matches the paper I'm using. Choose Relative Colorimetric.
THEN, I click Print Settings...under the 4th drop downu I choose "Print setting..." again. Under "Basic" "color" and "Color settings" are grayed out as are some of the "Media Type" options.
Is this normal? The problem is my black and white prints are printing really badly. They have color tones. I've cleaned the nozzles on my Epson printer, done everything the print utility suggests. All the test prints look fine.
how I can to reset all the settings back to default settings...
View 3 Replies View Relatedi recieved a prom pic from my daughter and i was going to print it and frame it, but 2 things happend.
The first one was that when i tried to print it it said it was tooooooo big 40inx60in so i resized it to 8.5x11 and it got very blurry, after about an hour i figured out how to get it sharp again (by accident) and forgot how i did it DOH!!! It was some kind of compairson with 4 of the same photo and resizeing the file from 9.5M to about 400kb and actualy adding some blur.
The next problem is when i printed it, it was so washed out it looked like an old 70's poloroid but on screen it looks great. Now I've read the color settings section but i think i might have set some settings wrong [U]and i don't think i fully understand what i'm reading . I know there are settings to either let photoshop take care of the printing or let the printer.Personaly i think i would like to let photoshop do it that way any email's or photo's i shoot will have a common baseline. The printer i'm using is an hp psc 2410 and the camera is a minolta dimage7i, is this a good camera / printer. I'm in adobe rgb(1998) mode and i think i saw somwhere in the printer software to choose between adobe rgb or the hp printer.Do these have to match.
Put simply how can i print it the way i see it on screen
I know ....long winded but i try to give all the info i can
software: adobe photoshop cs2
Card: nvidia geforce ti 4600
crt: compaq mv 940 17in regular screen 1024x768
Printer HP psc 2410
Camera: Minolta Dimage 7i
I’m a long time Photoshop user but recently picked up LR4 to try to fine tune my workflow. I’ve noticed that after importing new files (RAW, I haven’t tried with jpg) into my library as I scroll through them (1-up, not in grid) the preview comes up and then after a second or so the WB changes to a much colder image.
Does LR4 initially preview at specific settings and then change to the individual image settings? Even if so, the final images seem very cool and I feel like I have to up the temp more than I should have to. My previous workflow was to sort in Bridge and then use ACR to import to Photoshop. I feel like I did much less tweaking of my WB this way. I feel like I’m starting from square one with LR4.
Can Photoshop CS6 Camera Raw picture settings be synced with Lightroom 5 picture settings?
View 2 Replies View RelatedI'm having some problems with drawing paths in Illustrator. Everytime I draw a new path, this new path shows up in the standard settings. The 'brush defenition' turns back to 'basic' and the 'variable width profile' back to 'uniform'. It would save me a lot of time if I could change those standard settings into what I prefer.
View 5 Replies View RelatedWhen the 'up' arrow appears in a thumbnail and comes up with the message:
The metadata for one or more of these photos has been changed by another application. Should Lightroom import settings from disk or overwrite disk settings with those from the catalog?
What exactly does that mean? This seems to happen every time I export an image to PS (CS5) and return to LR. What exactly has changed? What settings are being imported if I choose 'import settings from disk'.
I've got a bitmap image and I forgot to save the psd...
Anyway, on the bitmap is a certain colour which I got by changing the opacity of the original layer which had this colour.
Now, I want to get the original colour - before the opacity change. Is there a way I can calculate this? I really need the precise colour.
I have a signature on a piece of paper which has been done with blue pen. It has been scanned at resolution of 600x600 dpi. I want my signature to look like original one after printing. Is it possible? There is a plenty of tutorials how to do that with normal black pen or how to do transparency etc. I need signature which looks like originals blue pen.
View 8 Replies View RelatedUsing Photoshop CS6, I opened a raw file in Camera Raw and made some adjustments. Then closed the file without opening it in Photoshop. I opened the same file in Camera Raw again and it remembered all of my adjustments. I want to reset the raw file back to its original before I made any adjustments. Is there a way to do that without having to go through each setting and changing them one by one?
View 5 Replies View RelatedIn the past I have almost always used Nikon's Capture NX2 as my RAW editor. In that, it's immediately obvious how to get back to the original NEF camera image, or even choose to go back to different stages in the editing history.
There seems no obvious way to do this in ACR. For example I made a mistake in a RAW edit, but when I reopened the RAW image again from Bridge I got the edited version with the unwanted error., I would like ACR to do what Nikon Capture can do.
I have also just found that, when trying to assign a keyword to this file in Bridge, I got got an "...error writing metadata" message. All the other NEF files in that folder (none of which have yet been edited in ACR) accepted the keywords with no problems.
Since writing the above, I have found that this "error writing metadata" is a common issue for which there seems no solution - it extends back to earlier versions of Bridge (I have CS6 64-bit with vety latest updates).
I need the word "JUVENILE" replaced with "MAGNOLIA", and "CHILD" replaced with "GHOST" also "WILL SMITHS GHOST WRITER" completely deleted. I need the replacement text to look exactly the same as the original.
View 8 Replies View RelatedHow do I open or place a new layer BELOW the ORIGINAL. I have tried dragging and that doesn't work. I have tried control/click when I create a layer and that doesn't work.
View 8 Replies View Relatedi want it back to the default setting or original setting.
View 1 Replies View RelatedI'm trying to save a gif. but if I save optimized, it makes the colours go weird. I just want to save the original but photoshop isn't giving me that option!
View 8 Replies View RelatedHow to get this effect from an original photo? Using photoshop only..
[IMG]C:Documents and Settings
usselchDesktopNew Folder[/IMG]
I open an image in ACR, make adjustments to it.
I open the image in Photoshop, and make a Duplicate.
I close the first image (Not the Copy), and select "NO" for "Do you wish to save changes"
I go back into bridge, and view the RAW file, and though I selected "NO" for changes, the image retains the changes/adjustments made in ACR.
Is there any simple way to return the RAW file to the original state as it appeared prior to ACR adjustments?
The only way I've found to do it is to keep separate files of the original RAW files on another drive.
I am using Photoshop CS2 and have windows XP.
I want to create images that simulate original artwork such as oil paintings so that the images show brush strokes, layers of paint and paint blobs?
I intend to print the images onto canvas to simulate original artwork.
This is a huge problem for me, and it's getting incredibly annoying.
This issue is when I import an image (drag and drop, or other ways as well) into Photoshop and the image appears in a really small size. I need to be extremely percise in all of my projects by the pixel, I can't have it going a single pixel larger or smaller. But when I drag it in, it shows up much smaller and I have to drag the boundries to make it larger. I basically just want to drag a 64x96 image in, and have it actually show up as 64x96, not incredibly smaller.
I don't know the size of a portion on the canvas, because I can't just guess, so it's impossible to actually stretch it to its original size and actually be accurate.
In CS3 I would duplicate an image in order to soft-proof before printing. By going from full to partial screen I could then identify both original and duplicates and could pull them into adjacent positions. In CS6 that doesn't work How do I separate my two images and place them next to each other?
View 2 Replies View RelatedI have a folder structure with 30+ image galleries and the client uploaded original files form their DSLR - causing them to display slowly on their website.
I have an action that changes the images to fit in a 800x800 size, "Save for the Web" over the original image.
This works just fine and if I run it on one directory I'm ok - but I would like to run it on all 30+ directories with a batch command.
I see that I can tell the batch to run on all subs, bit the issue is that it is saving the file in the directory specified int he action.
I know I can override the destination, but that only allows me to select one directory?
I need the images to stay in their original directories?
One more note - I know I can use the Image Processor script, but this is goign to use the Save As command vs the Save for the Web - the differance in file size is significent. ie. in my example file the Save As image at a Quality of 5 is 36K and the Save for the Web at a quality of 45 is 14k - with over 3,000 images to process and store this is a huge differance.
I was given a pdf by a customer. It's not quite laied out well for print so I need to move around some items. Unfortunitly not all the items are moveable in Arobat X pro. So I figured I would make the edits in PS5. Everything works well except the color after I have edited the page in PS is darker and muddier. I have no access to the orignal raw file so I have to edit the PDF. Is there a way to make sure the edited pdf matches the original? I tried opening the selected page of the pdf in both RGB and CMYK mode. I am using acrobat x pro and Photoshop Cs5 on mac oc 10.6.8.
View 1 Replies View RelatedUsing Photoshop CS5.5 I am at a loss to find the means to discard all edits in Camera Raw and revert back to the original photo.
View 4 Replies View RelatedI have been working on a painting for a few days, and after I was done with the underpainting, I saved the file as another one with a different name, and continued work on that file.
I had finished it, saved, and left photoshop open for a few hours. Later today I came back to it to make some final adjustments and while I was drawing, it suddenly and apparently for no reason reverted to the state it was when I first saved it (that is, like the original file).
I know there's probably no way to recover the file how it was before this thing happened, but what might have happenedSomething weird though, is that I opened the original file, the first one, and it had bits of the work that was supposed to be saved on the newer file.
Some of my files I open in CS6 open really tiny.....like 0.044% or the original size. Is ther a setting I can change to have then open larger.....
View 3 Replies View Related