CorelDRAW X6 :: Draw EPS Filter?
May 23, 2012
Just started playing around with X6. If I export something with spot colors to an EPS file and reimport it, the spot colors are converted to greyscale. Also happens if I open in Photoshop. RGB or CMYK works okay. I've also noticed that while EPS is an available export format, it does not appear on the import file type list even though it is set up through customization>global>filters so I am having to import it through All File Formats.
View 10 Replies
ADVERTISEMENT
Feb 14, 2008
Is there a way to draw a helix in X3? It is not evident to me and a search does not turn it up. Alternatively, I could draw a helix in MatLab (or such) and import it, but what file format would make it manipulable in X3?
View 14 Replies
View Related
Oct 14, 2013
How can I (or is it not possible) to have a line start in front but end up behind. Example, a thick line (that will look like a tube when done, i hope lol) starts out in the front.... travels off the side of the object then goes behind it.
essentially starts as the topmost(front) object, but ends as the bottom most (back) object.
View 3 Replies
View Related
Apr 20, 2012
I would like to turn a straight line into a wiggly line to represent an unconformity.
On a website I found a reference to a distortion tool but could not find it. I am currently using X5.
View 2 Replies
View Related
Mar 4, 2012
I'm having trouble drawing an egg shape. I drew the oval, then converted to curves. I moved the bottom node up and that made the shape squatty, but I want to move the side nodes out symmetrically. Is there a way to do this? Is there a simpler way to make an egg shape?
View 8 Replies
View Related
Feb 14, 2013
I need to draw a mouse in CorelDraw. Do you have a design ready?
View 1 Replies
View Related
Mar 16, 2011
Using CorelDraw X5 how do I draw a cogwheel?
View 6 Replies
View Related
Mar 25, 2013
I just wrote about the crash on scroll. Now when I try to open the file draw goes through the motions of opening it and end up with an untitled document. The entire file has been destroyed. I've had this kind of trouble before but not since I upgraded from Windows XP to Windows 7. It makes Draw almost impossible to use since any action even saving might trigger a crash and with the crash comes the possibility that the file is lost. Does this behaviour was specifically addressed and fixed with any of the service packs? I'm still using the original build.
View 10 Replies
View Related
Oct 4, 2011
I want to do is draw or make a simple heart shape and I can't figure it out.
View 4 Replies
View Related
Jul 30, 2013
i'm using corel draw x4 on windows 8. I use the Math-Type Editor in order to create complex formulas with indices, potencies, greek letters and fraction bars.
Unfortunately Corel Draw can't depict some of the symbols for example the small theta "ϑ" or the multiplication sign. Instead of writing them it creates a blank or question marks.
Is there a way to create those symbols in the Math-Type Editor?
View 4 Replies
View Related
Jan 20, 2013
I am trying to do a fancy rectangle box 183mm width and 91mm high, in the centre is a clock face 93mm in diameter, and i want to have a nice curve effect as i have tried t to show in the about terrible sketch, making them look like shoulders.
View 14 Replies
View Related
Feb 26, 2012
I used polyline to trace a tree trunk. I wanted it to be just a series of line segments which I was going to export to AutoCAD and then to Sketchup. However, each segment I drew said it was a curve. When I exported to AutoCAD it came in as a spline. If I convert that to lines, where I had maybe 10 lines there are now 100.
I also tried to 2 point line tool. I started each new line from the end of the previous. It gave me the same result.
Is there a way for me to end up with just the 10 line segments? No spline. No curve. Just 10 straight lines.
View 12 Replies
View Related
Feb 23, 2011
I need to draw a 3D (style) football. The white segments are hexagons and the black are pentagons as in the attached picture. Of course, these won't match up correctly whilst lying flat as a football is round. How do I create the illusion of this? And the shading etc?
View 14 Replies
View Related
Nov 3, 2013
I'm using Dropbox to synchronize my files with another computer and do backups. Over the last three months I haven't been doing anything with my CorelDraw files but recently tried opening a file and found there was a problem. When attempting to open a file, I get this error:
Either filename is not importable using the selected filter, or this format is not supported.
I thought it was related to Dropbox so I created a brand new file, saved it and was able to open it. Dropbox sync'd the file and Dropbox gave an update message that Dropbox has updated the file to the most recent version. Afterward, I wasn't able to open the file with CorelDraw anymore.
I'm using CorelDraw X5 and saving the file in X5 format. Is there anything I can do to recover my files?
View 7 Replies
View Related
Apr 11, 2013
I have realised that I did not check the TTF filter on install
Do I have to re-install the whole program again or is there an easier way of just adding it in afterwards. FYI: the TTF optionis not in my Global Filtr Settings list to ad or remove.
View 5 Replies
View Related
Oct 18, 2013
In X5 Draw I am working on a job and the run time error comes up and shuts X5 down. And then when i restart and try to access that same file (saved throughout job) I get this error that the file is not importable by selected filter, or the format is not supported.
View 2 Replies
View Related
Mar 10, 2012
I just installed cdr x5 on a tablet pc (asus slate B121) and I like it very much. But I begin to get frustrated by the Poliline tool.
Since this tool needs you to double click to end a curve I always get curves with added nodes to the ends (it's impossible to do a double-click with a pen without moving the pen between the two clicks.
The only workaround that I found is to move away the pen from the screen far enough so that you can press the space bar to end the curve without extra nodes. But this is really extra gymnastic for your arm... and quite annoying while you try to get the job done in few minutes.
So, is there a way to use the poliline tool without "putting down" the "unclicked" node while pressing the spacebar? Something similar to the freehand tool, but with the ability to draw curve-straight lines consecutively.
View 1 Replies
View Related
Mar 6, 2011
when i draw a circle in corel draw, i set the height and width dimension to equal, so it should become a circle, but it end up in the monitor screen an oval shape, also i notice the y axis and x axis in the corel draw is not equal. so i check my artcut y and x axis, is also same as corel draw. But when i cut out the shape, it cut out a circle shape. isit due to monitor or other setting.
View 12 Replies
View Related
Jun 6, 2011
I have an object that I need to print . It is a cartoon man and a cartoon flag with text next to it . I have printed the whole thing without a cut and it worked fine .
But now I need to print it with the images cut out. I believe I will be able to put a contour around the font easily however the problem is putting it around the flag with man in front of it . right now it makes contours on the inside of the image. Its hard to explain ..... the flag is supposed to be white with blue and red in it . and when I printed it on a big sheet with no contour it was fine .. but now that I need to do it on its own the contour goes inside the flag because there is no rectangle shape around the flag .(no outline around flag) How do I put the rectangle around the flag as well as put a smooth contour around handyman?
View 1 Replies
View Related
Dec 21, 2009
I am trying to create a logo with an open sided globe. I need to draw a shape like a crescent moon.
Stacked two circles on top of each other with the edge showing, but can't make the part that isn't supposed to be seen transparent.
Not a graphic designer but have used CorelDraw since v.3. (I am using X4)
View 6 Replies
View Related
Oct 10, 2013
I need to make a design which would have something like a page turn in the right bottom corner. It should look like this:
How to make this? Obviously I can't draw it manually. Is there a way to download this in a vector form? Or is the drawing the only way?
View 4 Replies
View Related
Mar 20, 2011
when making no changes to an AI CS5 file, it still asks if I want to save the changes.
steps:
-open Draw- open an AI file- make no changes- when closing Draw, it asks --> do you want to save the changes?also, when you open "fileName. ai" Draw doesn't remember the file's name
I mentioned this in passing in another thread, and apparently this works with CS2 AI files. I'm using CS5 AI files... I don't know about the other versions. obviously, the name should be shown in the titlebar
and... when the file name is really really long / complicated it's handy if Draw remembers it so I can easily make a Draw CDR copy without having to type in the exact name again. Also, I shouldn't have to type in the name when I want to export as jpg (or whatever format).
View 5 Replies
View Related
Jun 9, 2010
I'm getting error "Either is not importable using the selected filter, or this format is not supported" while trying to open a Corel Draw file I received from someone in X3.I read through the posts and can understand only that this could be a Corel Version problem. Based in this I've two questions.
Q1) How to get around this error and successfully open that .cdr file in X3?
Q2) How to determine which version of CorelDraw was used to create this file?
View 7 Replies
View Related
May 7, 2013
I'm laying out cribbage board designs for export to .dxf. I've drawn the board holes as circles but for the dxf file what I really need is a Single Point at the center of each circle.
So, is it possible to make single points in CorelDraw X4? If so, is there a way I can put a single point in the center of 300 holes at once?
View 12 Replies
View Related
Jul 2, 2012
I have the list of x,y coordinates for the CIE colour spectrum. How do I import the list so as to draw the spectrum curve?? The curve is the horseshoe shaped curve shown in the figure below [not the straight lines which are colours boundaries] that contains all the spectrum colours. Seems to me I should be able to import the list somehow and CorelDraw would then produce the line.
View 10 Replies
View Related
Nov 30, 2012
When I go to open the displace filter it just crashes .
View 2 Replies
View Related
Feb 18, 2012
Every time I use the ellipse tool to draw a shape, a portion of the ellipse is missing. The missing portion is always on the lower right hand side of the ellipse. I am using CorelDraw Graphics Suite X4. I have attached a graphic showing what I mean.
View 3 Replies
View Related
Jun 22, 2011
I am trying to draw a needle and thread showing a curved line as the thread with parallel lines so I can show where the thread crosses over itself. This is used as a stitching diagram.
View 3 Replies
View Related
Aug 25, 2011
having trouble importing pdf files into corel, it keeps telling me there is an internal filter error.
View 2 Replies
View Related
Aug 25, 2013
I tried to use the lens flare filter in Photoshop CS6.While the lighting effect is interesting, it introduces ugly artifacts like blue or orange blobs (which are supposed to be the reflection of the diaphragm, but do not look anywhere close to that, but instead are just cheesy looking blobs of color).
In the "movie prime" setting blue lines are added which have nothing to do with lens flar.On top of it, the preview is about the size of a stamp. Any way to use the filter without getting these artifacts, or is it - what I assume - just a useless toy filter, that has probably been dragged on for years and years because it's always been there? What do you use to create a lens flare effect? Are you just building it from scratch with brush work?
View 5 Replies
View Related
May 11, 2013
camera raw filter does not show up on the filter drop list on CC. I am trying to determine why this is the case. So far everything else seems to work.
View 2 Replies
View Related
