CorelDRAW X5 :: How To Draw A Wiggly Line
Apr 20, 2012I would like to turn a straight line into a wiggly line to represent an unconformity.
On a website I found a reference to a distortion tool but could not find it. I am currently using X5.
I would like to turn a straight line into a wiggly line to represent an unconformity.
On a website I found a reference to a distortion tool but could not find it. I am currently using X5.
How can I (or is it not possible) to have a line start in front but end up behind. Example, a thick line (that will look like a tube when done, i hope lol) starts out in the front.... travels off the side of the object then goes behind it.
essentially starts as the topmost(front) object, but ends as the bottom most (back) object.
I used polyline to trace a tree trunk. I wanted it to be just a series of line segments which I was going to export to AutoCAD and then to Sketchup. However, each segment I drew said it was a curve. When I exported to AutoCAD it came in as a spline. If I convert that to lines, where I had maybe 10 lines there are now 100.
I also tried to 2 point line tool. I started each new line from the end of the previous. It gave me the same result.
Is there a way for me to end up with just the 10 line segments? No spline. No curve. Just 10 straight lines.
I have an object that I need to print . It is a cartoon man and a cartoon flag with text next to it . I have printed the whole thing without a cut and it worked fine .
But now I need to print it with the images cut out. I believe I will be able to put a contour around the font easily however the problem is putting it around the flag with man in front of it . right now it makes contours on the inside of the image. Its hard to explain ..... the flag is supposed to be white with blue and red in it . and when I printed it on a big sheet with no contour it was fine .. but now that I need to do it on its own the contour goes inside the flag because there is no rectangle shape around the flag .(no outline around flag) How do I put the rectangle around the flag as well as put a smooth contour around handyman?
I am trying to draw a needle and thread showing a curved line as the thread with parallel lines so I can show where the thread crosses over itself. This is used as a stitching diagram.
View 3 Replies View RelatedI have a problem with a recently downloaded version of Inventor. When I start a new drawing all I get is a blank blue screen instead of one with a grid display. If I start a line I can see the cursor change to draw the line but a line does not appear. I don't know if it something with how I installed the program or just system settings.
View 2 Replies View RelatedHow can I draw a straight line without that protractor shaped dotted line following my cursor making it lag and also not snap correctly to the next line? Also, I have noticed that I can't set my user interface to auto cad classic settings. There seems to be no option for it in workspace settings.
View 3 Replies View Relatedin autocad we use offset commend to draw a parallel line to another line what we should we use in Chief Architect x2
View 1 Replies View RelatedHow to draw a line that STARTS at a perpendicular angle to another line ???
View 4 Replies View RelatedI must have pushed one or the other button but I don't know which one!
I use CS5 and have now a small arrow on my line segment tool (as shown in the picutres):
Ever since that when i click shift, it just allows me to draw vertical lines, rather than vertical or horizontal.
I don’t know if there is some way to draw, or somehow to say to AutoCad that it let me to input measurements from line but not from main base pint.
For example in Revit I can make angular dimension between lines and then apply any angle that I want, maybe AutoCad has such tool?
I was drawing a lot of lines with the pointer that stuck at the end of the line and after that it stuck at the beginning of the other line (i hope you understand what i mean). I don't know what i pressed but now this function is not active and is very difficult to draw the lines.
View 3 Replies View Relatedwhen I (try to ) use Pencil and Brush tools, (cross-hatching), some lines get erased/replaced by the lines drawn close to them. It must have something to do with the preferences, but I am not sure what to change/adjust.
View 2 Replies View Related1. if i draw a line using the line tool.. can i curve it to say 40 degrees like i can with the text function?
2. So ya that one was easy.. hows bout when i want to cut something out ACCURATELY, the pen function, right? (according to a friend)when i make all those little boxes and select the area i want to cut, all that gets copied are the outer lines, which i presume is what ive just drawn.. how do i cut the area inside this?
3. and finally maybe a slightly less easy one- In Paint, when you cut out an object and paste it, you can select for the white of the image to become transparent so you can paste over what you have already.. is thee a feature in PS for this?
My .bmp file is in some funny state wherein selecting the drawing tool will not draw. Either with foreground or background color. It just does nothing. There are no error messages, so Gimp thinks I am doing what I want to do, but nothing at all is actually happening.
View 5 Replies View RelatedHow do you draw a straight line?
View 3 Replies View RelatedIf i wanted to draw a straight line with a color, much in the way you would traditionally with the edge of a rule, with the paintbrush or pencil tool, how would i do this? The pen tool creates paths. i do not want this. i just want to draw or paint a straight line.
View 4 Replies View RelatedI am trying to draw a yard plan in PS 7 but am not sure how to do it. I am using the rectangle tool in "Paths" mode and even though it will draw a rectangle I cannot see it in the layer. Its all grey and when I hide other layers and just leave the rectangle layer open I cannot see it.
How can I do this? Also how am I able to adjust the line thickness?
How do you draw a single line in Photoshop?
View 1 Replies View RelatedAt the top of the clock, how do you draw the curved lines, which say radius of 4.
[URL]........
In model space I draw a line with a particular linetype, say a fence row, and I adjust the linetype scale so that it reads like I want it, but then when I go to paper space, it's just a plain line no matter what I set the linetype scaling to?
View 9 Replies View RelatedI'd like to draw a line with a certain pressure, but I have no tablet."Bow Tie" is almost the right pressure profile, but it's too thin in the middle. Can I adjust those pressure profiles, create own profiles or anything?
View 5 Replies View RelatedIs there a way to draw sinusoidal line in max?
View 5 Replies View RelatedRevit 2012 installed on the student computers. The computers are only a year old. However, they do have integrated video. The computers are capable of running Inventor 2012 with not problems at all. The problem that I have having is that when I try to draw a wall on Revit, a message pops up that says "An error has occurred while drawing the contents of this window. This window shall be closed." It only happens when I draw a wall in LINE form. If I use the rectangle tool to draw all 4 walls at the same time, it doesnt crash.
View 4 Replies View Relatedhow do we draw a tangent line in autocad
View 1 Replies View RelatedI decided to draw a long box, 2 pixels wide and fill it with the desired color. That was all fair and well until I tried reducing my image and then the nice looking spider web line that I drew turned into a horrible black and white block line that looks crap.
So, I decided to try and get rid of it, and here I am 45 minutes later still trying to get rid of it. I don't what layer it is on, there are many layers, whenever i find the layer it is and delete it it then turns up in another layer in a different color. I've tried copying and pasting over layers, it just keeps coming back, I don't know what is going on anymore, it wont go away....
How to draw a simple freaking straight line in GIMP by clicking on a point and then clicking on another point?
I have created a layer for the dashed lines, but they continue to be solid lines.
View 9 Replies View RelatedI want to load a text file, the file is in X,Y format. I want to draw the line on this file without have to enter the x,y coord one by one.
View 2 Replies View RelatedHow to draw a line with given angle at the end? What is the command?
View 4 Replies View RelatedHow do I draw a straight line in GIMP? I'm guessing all those tutorials are aimed at windows users. But I use Debian. Also tried ctrl, alt etc.
I have to wonder what kind of reasoning went into deciding not to have a line tool. It seems so simple to implement compared to all that advanced stuff. The only decent way to make a line currently that I can see is to make a square by filling a selection, shrinking, deleting, then delete all the sides of the square that i don't want. But this is so inefficient to do every time I need a line.
when i draw a line with 4 units in autocad the line seems as small as a point but in the example i watched it was long enough so how can change line length shown and in the another example i watched after clicking the line command and specifying first point the user was typing a length in the command line as 4'7-1/2 and clicking enter.after this the line's direction and length was automatically forming.but when i doing the same it doesnt work.how can i do both of these.
View 9 Replies View Related