I just got a new computer at work and am working with Corel X5. I upgraded from X2 to X5, so all of my files are X2 files. When I open a fairly large file on my new Dell with more ram etc. I have major problems with the program responding to commands. I really did not have many problems in Corel X2 on a 7 year old Dell computer. Problems are:
1. Takes forever to open the file.
2. When it finally opens it take anywhere for 30 seconds to two or more minutes to respond to a command i.e. move an object, deleting an object, editing text and so on so I am waiting for each command I make.
We are still on Windows XP Professional in our office – could that have anything to do with the problem. Corel is the only problem I am having problems with. Dell Optiplex 790
I have AutoCAD LT 2011 running on Windows 7 64. I'm using it since long time.
Two weeks ago I started having this problem: as soon as I select any command from the File menu that should open a dialog (Open... Save As... Import...) the program freezes and I see (not responding) in the upper left title bar.
No way to go on. The only solution is to close the program.
Reinstallation from scratch included. System recovery to factory image included. No solution.
CorelDraw X6 quits responding when trying to import Acad drawing (vectors). To try to get around this I opened the DWG with CorelDraw X6 instead of importing. Then saved as a CDR and then tried to import the CDR. CorelDraw X6 quit responding again.
Note* Tested with CorelDraw 5 and it worked without problems.
Working in photopaint . . . all goes well until I try to save or close the file. Then it stops responding. When I try to close CorelDraw, it says that I cannot close it while I have the photo open in Photopaint. However, Photopaint is no longer running. This is new problem since I installed Patch 3.
I'm running Windows 7 64bit on a relatively high end PC: 2.65 gigahertz Intel Core i7 920, 6 GB ram, NVIDIA GeForce GTX 295 [Display adapter] (2x) in SLI, etc...
So when I attempt to open eps file, it simply hangs, and eventually says NOT RESPONDING. As I type this I've been attempting to open a file for over 30 minutes. I've tried rebooting to no avail.
The problem I'm having with X5 is that whenever I try to save something, or open a file...I get the (not responding) message at the top of the page. Some times it will clear itself out and open or save the file, a sometimes it will just close the program.
This happens primarily in Draw....cause that's what I use the most...but has happened in Photo-Paint as well to me. 8gb of memory...so that's not the problem, and when I check for updates...it's the most current update/SP as well. It's always slow to open as well. Only about 400 fonts installed too.
So, I've had CorelDraw X4 for maybe two years now. Everything has always worked fine.
Now, I can't get it to open new documents, and when it says it's "processing" to open old documents.. It doesn't really make any progress, and nothing every opens.
I am to find a way to put the object origin icon on the commands bar, it relocate, move and align objects easily. I can find it in the transformation docker but the icon will be easier for me to use.
If there is a way to create a new command under the customization tab. The reason I ask is that I use the line color 100% black, 30% Black (It is in the commands already) and red. I want to create a new outline command for the color red so that I can use a shortcut key.
I'm wanting to cut a shape out of a rectangle from a macro. I need to do this on hundreds of files. I tried to do the following while recording a macro:
Select all shapes Run Arrange->Shaping->Back Minus Front
However, this just results in this comment being recorded: "Recording of this command is not supported: ShapingCommand"
How to call the shaping commands from VBA? I've dug through offline and online documentation and have come up with nothing.
Most of my Command Line Commands have stopped working !!! I noticed when I wanted to mirror/flip an object, I could not get those Command Line commands to "expand". When I tried other Command Line commands under "Image", "Effects", etc, most of these would not work either.
I have CS6 and LR4.3 installed (for a while). I am not not able to Edit In LR4.3 4 photos that I wish to make into a panorama. CS6 will start to the first window and then locks (Not Responding). I have uninstalled and reinstalled CS6 and delete the preferences, all to no avail.
My photoshop cs2 program has been running very well for the past year or two. I have started saving files back and forth between cs3( at school) and cs2 (at home) for a school project. All the sudden, as I was painting a background to place in my project (magic wand>move tool) my cursor becomes an hourglass, all panels become blank, and at the top is says Photoshop (Not responding). This has happened 4 times now and I have lost my work each time.
I installed, registered, activated etc. Photoshop CS3 on my laptop today and when I went to start it up, it went to about the point where it said 'staring plug-ins...' and then I got the Program Not Responding message and it shut down, before I even got to open a file or even get to that page. I only had the blue blox with text and the grey background, then it shut down.
I can't open any files in photoshop CS3 I've tried from file-open and also from the source folder rightclick open with. No joy, even File New... brings up the new file options window but when I click ok nothing opens.
I've just installed max 2012 on a brand new workstation. Everything seemed to work fine until I've noticed that every time I close max or try to reset/open a new scene the program becomes unresponsive!!?! If I try to end the process, the program shuts down but the 3dsmax.exe process remains active in the task manager even 10 minutes. If I want to start a new session of max, I first need to end the Wscommcntrl3.exe process... I have installed all the latest SP and hotfixes and I'm using only V-ray and a couple of scripts. The problem doesn't occur on a freshly opened scene. It manifests itself after I've been working on the scene for some time or after I render something. This is becoming quite frustrating and time consuming. Why can't I end the 3dsmax process from the task manager? I can work on a single scene for hours and render it without any problem.
I can get AI to start up however when i try to open a file from my HD, AI stops responding. Ive tried to open with the 32bit version too but same thing happens. Im on Windows8, 3rd gen i3, 6 ram, intel HD4000 internal graphics card.
less than an hour after running the latest Adobe updates, Cocktail, Repair Permissions, reboot 10.7.5 dragging an 8bit background layer from a small .jpg to a simple 16bit 70MB layered file i got this for about four minutes waiting for it to generate a crash report, but it cleared in the meantime
as i've had no previous issues like this, i hope it is not something new..i also seem to have a problem with Color Settings changing, but that is before 13.0.2 (General Purpose 2 was set when i looked after this hang)
I'm running AutoCad 2012 in Windows 7 64bit. Notebook is an Asus N53SV, i7 2GHz with 6gb RAM and NVidia Gt540 2gb. The problem is, when i try to Extrude objects, the screen turns into black for a second and a warning says GPU is not responding. Also the notebook has another GPU of Intel within the CPU.
I have been running Photoshop CS2 on my computer for about a month now, the full version, activated and registered. For some reason whenever I open a file, Photoshop stops responding; all it does is make a sound ("dun") sound whenever I click on the Photoshop window. The only button that works is the minimize button; I have to use Windows Task Manager to close the program.
Does anyone have any ideas what's going on and how I can fix this?
I am trying to install Photoshop CS3. I am using Vista Home Premium. It appears the installation starts, but stalls and I end up with a "not responding" message.
I have CS2 with Windows. It has been working perfectly but just recently some of the keys will not respond eg F7 for the layers.Also when trying to put Text on an image the text shows as a line ---------- but shows what is written in the layers comp.
Very annoying as I cannot gauge properly what I want to do.I'm not sure if it is something I have maybe altered in the set up unbeknowingly.
I have just reinstalled Adobe Photoshop CS2. It appears to install okay. When you start it up it appears to start okay, the splash screen appears and goes through the start up, that disappears and the normal working page appears, but as soon as I click on any menu,tool etc. it goes blank with the top left corner of the working page showing Adobe Photoshop (not responding). I also tried a "repair" from the unistaller, but no joy.
For info:
I am working on a Dell Dimension 9150 I am running XP pro sp3. AV is AVG and firewall is Comodo. I have never been able to get PShop working on this computer, so I don't think it is a PShop problem. I have stacks of disk space, and 2Gb RAM.
I replaced an older HP Pavilion (Windows XP OS) with a new Pavilion with 64-bit Vista Home Premium. Photoshop CS3 seems to install okay, but when I launch the application I get a blank screen with a "not responding" message. I've tried re-installing, updating, etc., but still get the same results. Bridge opens up just fine.Since I read that CS4 has native 64-bit support, I thought I might have better luck with that. But I'd like to be sure before I open the upgrade software package.Any thoughts, or similar experience? Also, I would probably uninstall PS3 again before installing the update since CS3 doesn't launch anyway. I don't need CS3 to be on the computer, do I, as long as I have the serial number?Thanks for any help and/or suggestions. I'm looking forward to being able to use Photoshop again, especially on the new computer (8 gb memory, ATI Radeon HD 3200 Graphics, AMD Phenom X4 9650 Quad Core Processor).
The problem I have with my software is when it has finish loading and I open a new document, the cursor or arrow appears as the hand tool and no matter what other tool I try to choose it never changes. If choose to uses brushes it still remains as a hand tool. Whats up with that. I tried restoring to default settings and clearing history nothing happens.
PC I am using Revit Architecture on is Windows 7 Professional Intel Core i7 3.4ghz Ram 16gb 64-bit OS
When rendering a job the program stops responding. The task manager shows the cpu working hard but the memory is not being used at all. Windows reports failure to recover program and the application exits.
I'm pulling my hair out about trying to figure out why my 3ds max design won't work (student version). The program will open, the welcome screen will come up, but within seconds of having a new file open, the program stops responding. This happens 100% of the time and generally within 10 seconds of being open. The program will not let me do anything before it freezes.
I have installed all three service packs. I have an i7 processor, runs off a solid state hard drive (a brand new one), 12 GB RAM, the graphics card is a few years old but should be fine.
Last month, I've been trying GIMP. It works fine, 2.8 one. But, yesterday, I just wanted to open it, actually the startup loads well, but somehow, stopped while attempt to loading fonts, so, I force to close it with task manager. And opening it again. My gimp startup doesn't load earlier, and suddenly loading fonts once the startup opened up. A little moment, my Gimp was not responding, and make the whole WINDOWS NOT RESPONDING. The only way I can, is just shutting it down, forced it, by plugging off the power source
little note, I'm running Gimp 2.8 inside of 32 bit windows 7.
