3ds Max :: Design 2014 Non Responding
Feb 11, 2014
I'm pulling my hair out about trying to figure out why my 3ds max design won't work (student version). The program will open, the welcome screen will come up, but within seconds of having a new file open, the program stops responding. This happens 100% of the time and generally within 10 seconds of being open. The program will not let me do anything before it freezes.
I have installed all three service packs. I have an i7 processor, runs off a solid state hard drive (a brand new one), 12 GB RAM, the graphics card is a few years old but should be fine.
View 8 Replies
ADVERTISEMENT
Jul 24, 2013
The program works fine until I try to edit the boundary of the topography. As soon as I click "edit boundary", the screen goes black for about an hour, then comes back with about 25% loaded. This cycle repeats until the loading is complete, so it takes me a few hours just to enter edit mode. The file is only 17, 280 KB, and Ive been running 240,000 KB files without an issue whatsoever.
View 3 Replies
View Related
Nov 27, 2013
when i want to use hatch in autocad 2014 LT, autocad stop working.
wheni chose my settings like pattern and scale everything is just fine.
after i select a field for hatching autocad stop responding.
this happend 9 out of 10 times...
im running service pack 1.
View 9 Replies
View Related
May 18, 2013
I have been trying to install and run a student version of AutoCAD 2013 on my computer and it keeps crashing/freezing at the first startup after installation, and never works after that. Installation is all fine and smooth. Starting the program however takes a few seconds to load the plugins then it hangs at the loading screen forever. I've tried turning off the loading screen but the program itself just crashes and appears to be "Not Responding" anyway. I've tried uninstalling all Autodesk products and only install AutoCAD 2013 but it's still not working.
As for my computer, it runs Autodesk Inventor 2014 very well. Specification-wise:
Windows 7 Professional 64-bit
Intel Xeon E31220 3.10GHz
RAM: 16GB
NVIDIA Quadro 600
View 5 Replies
View Related
Sep 30, 2013
in my autocad 2014 save as in 2007 & 2004 format system is not responding and not able to finish. but when i save in 2013 and 2010 format is ok. i install same copy of autocad in my laptop its working good.
my system config: operating system - w7 64bit
8gb ram and 1tb hard disk
View 8 Replies
View Related
Feb 5, 2014
Max Design 2014: Where in the world is the region render button? It's been ages since it was a default, but you could always get it by going to customize menu. Now there no longer seems to be a listing. Any simple region render button is still possible?
View 3 Replies
View Related
Feb 10, 2014
We have autodesk building design suite premium 2014 on the machines at our office and I can't civil view to run on any of the four computers. There is an error message that says: "no civil view country resource kit folders could be found in the following loaction...". I have seen something online that says to find the civilview2014.msi and run it manually. I have tried that and it says that it can't find autode~1.cab. I have searched the pc and cannot find that file anywhere.
I think the software was installed from a flash drive. Would downloading the software and reinstalling it do anything?
I have also installed all updates and service packs for this product.
View 1 Replies
View Related
May 14, 2013
There doesn't appear to be any preloaded content in my Style library - how to populate this library?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 2 Replies
View Related
Jun 25, 2013
The installation of IDSP has been an adventure. After a few rough starts Autodesk support team got us through the installation of 2 computers. Now I am attempting to install IDSP on my computer and have run into a number of errors that between this forum and Autodesk support I have worked through.
I start the install once again and looked like everything was installing ok.
That is until I get an message "Allied product is not found" and the install fails and removes all installations up to this point. The failure happened while installing the Civil 3D Language Pack.
Install log states:
2013/6/24:15:51:11 Administrator ______ Allied product is not found2013/6/24:15:51:35 Administrator ______ Install Autodesk AutoCAD® Civil 3D® 2014 Language Pack Failed Installation aborted, Result=1603
View 6 Replies
View Related
Sep 7, 2013
So I have this issue where opening the compact material editor a second time causes 3ds max design to totally crash. I cant figure out why it is doing that. I have tried reinstalling the software, even tried re-dowloading it and nothing works, have all the service packs and so on. Funny thing is that it works when using the slate editor. I can recreate the bug every time. Just open 3ds max design 2014 x64. Press material editor (assuming its in comact mode), close the editor and then open it again. Immediatly the program will crash to desktop, telling me that the progam has stopped responding.
View 1 Replies
View Related
Jun 24, 2013
We have just recently install Building Design Suite Standard 2014 and the tool palettes DO NOT work.
Clicking on the standard palettes that load with ACAD will not even work. We have also tried to make new ones and the will not MAKE (for lack of words).
Here is the Autocad warning it gives us:
Unable to execute the tool. Possible causes are:
-The tool is not registered properly. Please check your installation.
-the tool is from another application and is incompatible with the current application.
We are running a new copy and it IS registered.
View 6 Replies
View Related
Oct 9, 2013
I wanted to use the program to design a robot for our school vex competition. Vex has provided cad files for all the parts. So, how i can import the seperate parts into one design. I can only open each part individually but cant find a way to combine them so can assemble the robot in one design.
View 2 Replies
View Related
Apr 10, 2012
I just made a copy of assembly in Design Assistant.I opened the copied assembly in Design Assistant to make some changes.Parts are accessible but I have only "Clear" option possible. URL....
View 2 Replies
View Related
Mar 17, 2013
I have CS6 and LR4.3 installed (for a while). I am not not able to Edit In LR4.3 4 photos that I wish to make into a panorama. CS6 will start to the first window and then locks (Not Responding). I have uninstalled and reinstalled CS6 and delete the preferences, all to no avail.
View 5 Replies
View Related
Jun 26, 2009
My photoshop cs2 program has been running very well for the past year or two. I have started saving files back and forth between cs3( at school) and cs2 (at home) for a school project. All the sudden, as I was painting a background to place in my project (magic wand>move tool) my cursor becomes an hourglass, all panels become blank, and at the top is says Photoshop (Not responding). This has happened 4 times now and I have lost my work each time.
View 3 Replies
View Related
May 9, 2009
I installed, registered, activated etc. Photoshop CS3 on my laptop today and when I went to start it up, it went to about the point where it said 'staring plug-ins...' and then I got the Program Not Responding message and it shut down, before I even got to open a file or even get to that page. I only had the blue blox with text and the grey background, then it shut down.
View 1 Replies
View Related
Apr 12, 2009
I can't open any files in photoshop CS3 I've tried from file-open and also from the source folder rightclick open with. No joy, even File New... brings up the new file options window but when I click ok nothing opens.
View 5 Replies
View Related
Jul 1, 2012
I've just installed max 2012 on a brand new workstation. Everything seemed to work fine until I've noticed that every time I close max or try to reset/open a new scene the program becomes unresponsive!!?! If I try to end the process, the program shuts down but the 3dsmax.exe process remains active in the task manager even 10 minutes. If I want to start a new session of max, I first need to end the Wscommcntrl3.exe process... I have installed all the latest SP and hotfixes and I'm using only V-ray and a couple of scripts. The problem doesn't occur on a freshly opened scene. It manifests itself after I've been working on the scene for some time or after I render something. This is becoming quite frustrating and time consuming. Why can't I end the 3dsmax process from the task manager? I can work on a single scene for hours and render it without any problem.
View 6 Replies
View Related
Jan 17, 2013
I can get AI to start up however when i try to open a file from my HD, AI stops responding. Ive tried to open with the 32bit version too but same thing happens. Im on Windows8, 3rd gen i3, 6 ram, intel HD4000 internal graphics card.
View 2 Replies
View Related
Dec 12, 2012
less than an hour after running the latest Adobe updates, Cocktail, Repair Permissions, reboot 10.7.5 dragging an 8bit background layer from a small .jpg to a simple 16bit 70MB layered file i got this for about four minutes waiting for it to generate a crash report, but it cleared in the meantime
as i've had no previous issues like this, i hope it is not something new..i also seem to have a problem with Color Settings changing, but that is before 13.0.2 (General Purpose 2 was set when i looked after this hang)
View 6 Replies
View Related
Jul 19, 2012
I just got a new computer at work and am working with Corel X5. I upgraded from X2 to X5, so all of my files are X2 files. When I open a fairly large file on my new Dell with more ram etc. I have major problems with the program responding to commands. I really did not have many problems in Corel X2 on a 7 year old Dell computer. Problems are:
1. Takes forever to open the file.
2. When it finally opens it take anywhere for 30 seconds to two or more minutes to respond to a command i.e. move an object, deleting an object, editing text and so on so I am waiting for each command I make.
We are still on Windows XP Professional in our office – could that have anything to do with the problem. Corel is the only problem I am having problems with. Dell Optiplex 790
3.40 gigahertz Intel Core i7-2600.No memory cache64-bit ready Multi-core (4 total)Hyper-threaded (8 total)
NVIDIA Quadro 400 [Display adapter]
View 3 Replies
View Related
Apr 9, 2012
I'm running AutoCad 2012 in Windows 7 64bit. Notebook is an Asus N53SV, i7 2GHz with 6gb RAM and NVidia Gt540 2gb. The problem is, when i try to Extrude objects, the screen turns into black for a second and a warning says GPU is not responding. Also the notebook has another GPU of Intel within the CPU.
View 2 Replies
View Related
Aug 23, 2006
I have been running Photoshop CS2 on my computer for about a month now, the full version, activated and registered. For some reason whenever I open a file, Photoshop stops responding; all it does is make a sound ("dun") sound whenever I click on the Photoshop window. The only button that works is the minimize button; I have to use Windows Task Manager to close the program.
Does anyone have any ideas what's going on and how I can fix this?
View 2 Replies
View Related
Apr 18, 2009
I am trying to install Photoshop CS3. I am using Vista Home Premium. It appears the installation starts, but stalls and I end up with a "not responding" message.
View 4 Replies
View Related
Apr 23, 2009
I have CS2 with Windows. It has been working perfectly but just recently some of the keys will not respond eg F7 for the layers.Also when trying to put Text on an image the text shows as a line ---------- but shows what is written in the layers comp.
Very annoying as I cannot gauge properly what I want to do.I'm not sure if it is something I have maybe altered in the set up unbeknowingly.
View 1 Replies
View Related
Oct 19, 2008
I have just reinstalled Adobe Photoshop CS2. It appears to install okay. When you start it up it appears to start okay, the splash screen appears and goes through the start up, that disappears and the normal working page appears, but as soon as I click on any menu,tool etc. it goes blank with the top left corner of the working page showing Adobe Photoshop (not responding). I also tried a "repair" from the unistaller, but no joy.
For info:
I am working on a Dell Dimension 9150 I am running XP pro sp3. AV is AVG and firewall is Comodo. I have never been able to get PShop working on this computer, so I don't think it is a PShop problem. I have stacks of disk space, and 2Gb RAM.
View 1 Replies
View Related
Jun 6, 2009
I replaced an older HP Pavilion (Windows XP OS) with a new Pavilion with 64-bit Vista Home Premium. Photoshop CS3 seems to install okay, but when I launch the application I get a blank screen with a "not responding" message. I've tried re-installing, updating, etc., but still get the same results. Bridge opens up just fine.Since I read that CS4 has native 64-bit support, I thought I might have better luck with that. But I'd like to be sure before I open the upgrade software package.Any thoughts, or similar experience? Also, I would probably uninstall PS3 again before installing the update since CS3 doesn't launch anyway. I don't need CS3 to be on the computer, do I, as long as I have the serial number?Thanks for any help and/or suggestions. I'm looking forward to being able to use Photoshop again, especially on the new computer (8 gb memory, ATI Radeon HD 3200 Graphics, AMD Phenom X4 9650 Quad Core Processor).
View 2 Replies
View Related
Jul 22, 2008
The problem I have with my software is when it has finish loading and I open a new document, the cursor or arrow appears as the hand tool and no matter what other tool I try to choose it never changes. If choose to uses brushes it still remains as a hand tool. Whats up with that. I tried restoring to default settings and clearing history nothing happens.
View 4 Replies
View Related
Jul 12, 2011
PC I am using Revit Architecture on is
Windows 7 Professional
Intel Core i7 3.4ghz
Ram 16gb
64-bit OS
When rendering a job the program stops responding. The task manager shows the cpu working hard but the memory is not being used at all. Windows reports failure to recover program and the application exits.
View 4 Replies
View Related
Jan 23, 2013
Last month, I've been trying GIMP. It works fine, 2.8 one. But, yesterday, I just wanted to open it, actually the startup loads well, but somehow, stopped while attempt to loading fonts, so, I force to close it with task manager. And opening it again. My gimp startup doesn't load earlier, and suddenly loading fonts once the startup opened up. A little moment, my Gimp was not responding, and make the whole WINDOWS NOT RESPONDING. The only way I can, is just shutting it down, forced it, by plugging off the power source
little note, I'm running Gimp 2.8 inside of 32 bit windows 7.
View 14 Replies
View Related
Jun 7, 2012
I am a new user to Gimp and have gone out and watched many videos regarding how to use the different tools. I have recently been toying with the gradient tool on some text. Everything worked perfectly at first, but recently it seems to not be responding. Here are the steps that I take:
Open a new file with transparent background
Create a text box
Type in the text and adjust the font size and style
Go under layer, transparency, and select alpha to selection
Select gradient, select colors, select Dark Only mode
Drag my line from left to right across the text
When I used this exact technique last week it worked just fine, now, it either does nothing at all or will only respond only if I change mode from Dark Only to Normal.
View 1 Replies
View Related
