This is a very strange thing that is happening. Half the text on my file is not printing, it's like it's invisible. The strange thing is I received two files from the same person the first one was fine. It odd the first five lines are printing but not the rest of the text. I can re-type the text but I was wondering why it's happening.
View 9 RepliesMy office has two desktop printers, both HP. Our Officejet 7000 wide format prints great. On the HP Officejet 7500, we are often seeing text printing errors. It will not print the text from vertical dimension strings, and cuts off some M-text at an imaginary vertical line in the middle of the text box. PDF's of the same drawing look fine. Is this a printer driver issue? Is there anything I can do within AutoCAD?
View 3 Replies View RelatedI created a card with a colored panel and a white background. I then typed my name along the junction of the panel and background and as I typed the top half of the letters were the panel color and the bottom half of the letters was white.
View 13 Replies View RelatedBrand new GIMP user. I have been able to layer my pictures to create the effect I want. My problem is PRINTING. I can print but it is only printing half of the picture. Trying to print 4x6. If I flip the setup on my printer to landscape it only shows the bottom of the picture and it is not centered, the right size, and is on the top middle of my 4x6 photo paper. If I leave at portrait, it only hows the right side of the picture and, again, is the worng size and on the left side of the photo paper. Obviously I am missing something very basic?
View 1 Replies View RelatedI am making an image to be screen printed. In the background theres a moon in a very dark sky. The moon is going to be white, with a greenish gradient glow (circle shaped) around it, fading into darkness in the rest of the sky. I have the gradient ready but I can't figure out what to do about making it a half tone so I can screen print it.
I suppose the specifics of my image aren't crucial. What I need to know is how to make a coloured half tone where it's essentially two colours on two separate layers that blend into each other. Should it be two half tone layers? Or is it better to have ONE of the two colours a half tone, while the other sits below and together they create the illusion of blending?
When I send a photo to the printer, only part of the photo is printed.
View 2 Replies View RelatedI have gone from X13 to X15. With x15 all my text prints grey. This happens with both printers I use. If using x15 and saving as v13 I can open x13 and the job will print correctly. I am working in Windows 7. I think the problem is with a new printer option that does not come up with x13 but is there in x15 and I don't know what to change.
View 2 Replies View RelatedAll my efforts to make PDF files has failed. I get empty PDF files, and I have tried almost all variations of settings.
View 14 Replies View RelatedJust moving from Draw 12 to X5 - nice improvements.I've had this problem in 12 and also in X5. Could be a print driver issue.
Simply, when I try to print text with an outline the entire page gets filled with the outline color. Outline on objects print fine.I'm printing on my Xerox DC242 with the pcl driver.
I need to produce a text logo with the first half of the canvas background black with white text, and the second half white with black text. Do I split the background or join two individual canvases together ............ or something else?
View 3 Replies View Relatedtext_problem.cdr
When opening the attached file and printing it to efi/fiery rip (or adobe pdf), some characters are on top of each other. Word spacing is also to large. Printing the same file with X5 without problem. File is originally created in X5. Tried with the new "update text" feature as well, same issue.
issues using True Type Fonts when printing some text through CorelDraw x6. Basically I do screen printing, and I have issues printing TTF's... The text when it prints out chops letters/adds spacing where its not needed, and towards the end of the sheet of vellum - starts to print the first letter of word on the left over again...
I haven't had issues printing off of my HP printer, but that broke so I invested in a BROTHER HL-2230 monochrome laser printer.
Okay so I'm having issues with the text tabbing in X6 ,the tabs are set and double checked before it goes out for printing but when its printed some tabs just jump back to the edge. This also happens when the text box is updated(moved or re-sized). We have been having multiple problems with x6 now for a while , we have done the start with factory settings, which has only resolved previous issues temporarily as after a while the problem would reoccur. X5 never had these problems.
View 5 Replies View RelatedI have multipage (16 pages) document with linked frames of paragraph text. Every page consists of 2 linked frames of paragraph text and second one is linked to the first one of the next page. When printed, it prints only first two pages as a whole. And the 3-rd and all the others prints only first frame of the page and two rows of the second frame of the page.
Is this my printer (Canon LBP3010) or the CorelDRAW ?
BTW: Paste 16 pages from WORD to Corel X6 takes infinity and crashes. In Corel 9 it takes about a minute for 80 pages!
Status bar.JPG
Is there a way to have the status bar show up whenever a file is printing or saving. So far the only way it shows up is if you click on the little icon at the bottom right of the window.
Untitled-1 copy.jpg
When the modify dimensions box is open, the 'roundoff' menu gives me 1/16", 1/8" etc, even when DECIMAL is selected as the unit format.
This wasn't happening earlier, not sure what's going on. [in fact in a solved problem from earlier, a colleague found a drawing that had units set to millimeters, had its insertion scale set to inches! Different computer, so not related].
I want the selected object to be halved and duplicated and i would like to define a shortcut for x and y.
View 4 Replies View RelatedI am trying to edit a JPEG. It is one layer. My mode is Normal with 100% opacity, 100% fill. The layer is not locked.
I can use several tools including move, magic wand, paint bucket, crop. However, I cannot use the eraser, paintbrush, healing tool, clone stamp (which is the one I desperately need to use) or many others.
I know it is easy to tile objects using the Transformation - positioning and then click on the "relative position" and choose the direction.
But if I want to only shift it half the width to create something that may looks like bricks tiles.
One way to do it is to look up the width and height of the object, bringing up the calculator and divide it with 2 and then enter the result into the positioning manually.
I have a design that I would like to cut in half so that I can cut half of it at at time on my vinyl cutter. I can't think of way to do it in Corel.
View 5 Replies View RelatedI´m trying to extract text from a Corel file to a TXT file in another editor and then merge it back in.Extracting the text seems to be working just fine but when I´m trying to merge it back in I get the error message "Wrong file format or could not open".
View 2 Replies View RelatedI've just installed an HP5000N printer on a Windows 7 Network. I'm printing from CORELDRAW X3. (Same problem exists when using X5) I'm using the HP UNIVERSAL print driver. (I have both PCL & Postscript versions installed.)
I'm trying to use the ADVANCED Settings - which require POSTSCRIPT - with no success from either driver. I can SEE the dialog for changing LINE SCREEN, it allows me to change line screen (i.e. 35 lpi) and Screen angle (i.e. 45 degrees) - but when I PRINT - it give me the default printer screen of 100+ lpi.
I have also run the windows wizard and let WINDOWS search for a driver. It selected the HP5000 PCL 6 driver. This driver does NOT support the TABLOID (11x17) nor does it solve the no postscript functionality.
Getting an HP5000N to print different line screens from X3, or X5 running on W7 platform?
We first get a digital proof form printers as .pdf. Sometiems they save them with PDF compatible on. This makes my job harder because will get ilustrator asking for all the links when opening the .pdf.
What we do is open the .pdf form the printere, adn paste this on topof our orignal .ai file. This is to proof what theyt changed. Adding in theri product numbers, adn updating the UPCS is about all we want to see. What we look for is shifting type, or missing elelements.
Mas OS 10.8.4, AI CS5
I am desperately looking for the function in Coreldraw that allows me to cut one object based on the intersection of another object. Essentially I am looking for the "Trim" function that exists in Autocad.
Example... draw a circle...then draw a line that crosses the center of the circle. I want to be able to remove the bottom half of the circle below the intersection line.
draw and long narrow ellipse...then draw a circle on top of the ellipse I want to remove the ends of the ellipse outside circle..In autocad this takes exactly 3 keystrokes and less than 2 seconds...I have tried everything in Coreldraw and cannot find away to make this happen...
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
Copy and paste error — Text pastes at half-size.
When I copy and paste text already in my photoshop document, the text retains the styling but the text size is exactly half of what it should be.
I'm using the most recent version of CS6.
I entered a long sentence in Text Command and only 1st half is being shown. If I click T and select all it shows all the words, but normal select mode only half is being displayed.
Is it masked ?
Its like the other half of the text is invinsible.
I have been printing half tones for quite some years now with no troubles, all of a sudden my post script printer wont print half tones, I must have changed an option somewhere, and dont know what I did whether I have changed something in corel or on the printer itself but I dont think it is the printer .
View 2 Replies View Relatedcan i make halftones from a cdr file to make printing offset plates?
View 3 Replies View RelatedThis query is with regard to a Wire-removal/Touchup process in dealing with16Bit(half float) EXR files. Here is the process we adopted.
- Opened a 16Bit (Half float) Exr file in Photoshop, which showed it as 32Bit file
- Since the footage has lot of fire/blast elements among which we need to erase a "WIRE", we need to use "Healing Brush" which doesn't work on 32Bit files. When we tried to 'Convert' 32 Bit file to 16Bit file directly, we get a 'Washed Out' problem, since the shot is over exposed due to Fire/Blast elements in it. So here is a pipeline we used.
---- Added "Exposure" (Image > Adjustment > Exposure)
---- Set the "Exposure" to -5 (since it is a over-exposed frame, value -5 depends on exposure values of shots)
---- File > Export > Render Video (OpenExr output)
---- Open the above render file in photoshop
---- Convert to 16bit (Image > mode > 16bit)
---- Use any 16 bit tool for cloning (Eg. Healing tool)
---- Added "Exposure" (Image > Adjustment > Exposure)
---- Set the "Exposure" to +5 (Reversing)
---- Convert to 32bit (Image > Mode > 32Bit)
---- File > Export > Render Video (OpenExr output)
After rendering out, we checked the "original footage" with the "output exr" and apart from the Touch-up (wire removal) portion, all other details remain the same. Since this is a high-end hollywood project, (professionals) confirm whether this process is safe.
During the process we found a bug that this process only works, when we render whole footage, meaning if we try single frame, then there seems to be a slight color difference only in the overexposed area.
When we opened the client input EXR file, under Nuke it shows as "16 Bit (Half float)" but the same when opened under photoshop it shows as 32 Bit file.
Is there a way to screen a jpeg file in Autocad 2008 to be half toned to a lighter weight?
when i print a drawing with a jpg attached it comes out very dark and make sit impossible to see the work i have done on top of it. i have moved my work to be ON TOP of the image but the jpeg over rides my work. Is this possible?