CorelDRAW Graphics Suite X6 :: Half Duplicate
Sep 7, 2013I want the selected object to be halved and duplicated and i would like to define a shortcut for x and y.
View 4 Replies
ADVERTISEMENT
CorelDRAW Graphics Suite X4 :: Cutting Design In Half
May 5, 2011I have a design that I would like to cut in half so that I can cut half of it at at time on my vinyl cutter. I can't think of way to do it in Corel.
View 5 Replies View RelatedCorelDRAW Graphics Suite X3 :: Getting Half Tones To Print From HP5000N On Windows 7
Feb 21, 2012I've just installed an HP5000N printer on a Windows 7 Network. I'm printing from CORELDRAW X3. (Same problem exists when using X5) I'm using the HP UNIVERSAL print driver. (I have both PCL & Postscript versions installed.)
I'm trying to use the ADVANCED Settings - which require POSTSCRIPT - with no success from either driver. I can SEE the dialog for changing LINE SCREEN, it allows me to change line screen (i.e. 35 lpi) and Screen angle (i.e. 45 degrees) - but when I PRINT - it give me the default printer screen of 100+ lpi.
I have also run the windows wizard and let WINDOWS search for a driver. It selected the HP5000 PCL 6 driver. This driver does NOT support the TABLOID (11x17) nor does it solve the no postscript functionality.
Getting an HP5000N to print different line screens from X3, or X5 running on W7 platform?
CorelDRAW Graphics Suite X6 :: Remove Bottom Half Of Circle Below Intersection Line
Aug 13, 2012I am desperately looking for the function in Coreldraw that allows me to cut one object based on the intersection of another object. Essentially I am looking for the "Trim" function that exists in Autocad.
Example... draw a circle...then draw a line that crosses the center of the circle. I want to be able to remove the bottom half of the circle below the intersection line.
draw and long narrow ellipse...then draw a circle on top of the ellipse I want to remove the ends of the ellipse outside circle..In autocad this takes exactly 3 keystrokes and less than 2 seconds...I have tried everything in Coreldraw and cannot find away to make this happen...
CorelDRAW Graphics Suite X5 :: Duplicate Offset
Jun 12, 2011I want all new documents to have a duplicate offset of 0,0 (so they appear right over top of the original). I can do this in a document... via Tools, options (or customization), document, general
set the x and y of the offset to 0
BUT, click on the "Document" tree branch and there are checkboxes to save the options for new files.
I enable "Save options as defaults..."
and click the "General options"
... and this should include the offset amounts...
click okay...
Then open a new document, draw a squiggle, hit Ctrl-D, but the offset is still .25 x .25.
I've tried clicking the Tools, "Save settings as Default" but that doesn't work either. I've also tried saving the workspace, but that doesn't work.
This feels like a bug, because both the save settings for a new file AND the tools, save settings as default should have saved these document settings (? right?)
CorelDRAW Graphics Suite X3 :: All Of A Sudden Post Script Printer Won't Print Half Tones
Jun 4, 2013I have been printing half tones for quite some years now with no troubles, all of a sudden my post script printer wont print half tones, I must have changed an option somewhere, and dont know what I did whether I have changed something in corel or on the printer itself but I dont think it is the printer .
View 2 Replies View RelatedCorelDRAW Graphics Suite X5 :: How To Duplicate Clicking On Screen
Mar 9, 2011I’d like to copy an object a distance that I specify on screen. I can see how to copy a specified number of inches, but that is very awkward. You have to measure the distance (horizontal and vertical) and then input the numbers, then click “apply”. Is there a simpler way to do it?
Or is there a way to paste at a specified location? If I do an Edit>Copy then Edit>Paste, it pastes the new object on top of the old one.
CorelDRAW Graphics Suite X4 :: Duplicate Pop Up Options Box Is Missing?
Jan 14, 2010I have just installed CorelDRAW x4 and when I first used the 'Duplicate' tool, a pop up box appeared. The second time I used it, the pop up box did not appear and I cannot find how to open it again.
View 7 Replies View RelatedCorelDRAW Graphics Suite X6 :: Set Duplicate Default Distance?
Jun 15, 2012When I hit CTRL+D, CorelDRAW duplicates the currently selected objects.
The first time I do this after installation, CD asks me for a default duplicate distance.
I now want to change this default offset values. How can I do this? I can't find any option to change the default values.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
CorelDRAW Graphics Suite X6 :: Duplicate Function Settings
May 24, 2013I've noticed that DRAW seems to forget whatever settings I choose for duplicate.
So, I found the following in the index:
"Copying objects quickly. You can use other methods to create copies of objects quickly, without using the Clipboard. You can use the plus sign (+) on the numeric keypad to place a copy of an object on top of the original object, or you can create copies instantly by pressing the Space bar or right-clicking while dragging an object."
The + sign thing is cool. Wish I had known. But the Space bar drag either doesn't work at all or puts down one copy at what is apparently a set distance from the original, and then a second copy wherever I release the mouse button. ? Win7, DRAW X6.
CorelDRAW Graphics Suite X6 :: Duplicate Files Appearing
Nov 27, 2012Duplicate files are being saved to our server with the suffix: "(user collision 0)".
View 1 Replies View RelatedCorelDRAW Graphics Suite X4 :: Duplicate Overlapping Lines On Puzzles?
Dec 6, 2012I know this question was posted back in 2010, but thought I would bring it back to the surface to see if anything new has developed.
I am running X4. I draw jig saw puzzles in CorelDRAW (several shapes that I andomly node-connect) and each piece overlaps adjoining pieces on all four sides and are connected at multiple corner nodes as well as arc nodes. When sending to the laser for cutting, each side of each piece gets cut twice due to the overlapping lines. I was hoping the RemoveUnderlyingDups and NodeClean macro from a 2010 post would take these overlapping lines and create individual horizontal and vertical line segments from the connected nodes so the laser would make one continuous cut rather than duplicating all the cuts.
However, after running the macros, even on a small portion of the puzzle, I didn't get any results. I combined then broke apart as mentioned and still no joy. The only way I have been able to create separate line segments is to cut apart at the nodes and delete individual line segments... on 1250 pieces, with four sides and all sides overlapping, that's 10,000 separate edits... needless to say, duplicate cutting by the laser is faster.
Ideally, being able to create continuous horizontal and vertical lines based on corner node connections, would be the best. At that point, I could cut a 1250 piece puzzle with just 50 continuous horizontal lines and 100 vertical lines.
CorelDRAW Graphics Suite X4 :: Duplicate 4 Pages And Then Edit District Numbers?
Jun 4, 2012Is it possible to duplicate pages at a time. For example, I have 4 pages that are divided into titles per district and I need to set up multiple districts ranging from 3 to 12 ( I have already run Districts 1 and 2) So instead of copy/paste each title and enter a new layer, can I duplicate the 4 pages and then edit the district numbers?
View 9 Replies View RelatedCorelDRAW Graphics Suite X3 :: Export Text Or Graphics As EPS Files - Vinyl Cutting?
Mar 18, 2012why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
CorelDRAW Graphics Suite X5 :: Dropping Lines Of Text Or Parts Of Graphics?
Dec 1, 2010We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedCorelDRAW Graphics Suite X4 :: Graphics And Text Disappear After Zoom In Or Out Quickly
Sep 5, 2009Often whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View RelatedCorelDRAW Graphics Suite X5 :: Can't Export Large Drawing With Raster Graphics
Jul 21, 2013i´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
CorelDRAW Graphics Suite X5 :: Import From Illustrator Maintaining Graphics Position And Canvas Size
Nov 9, 2011I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
CorelDRAW Graphics Suite X5 :: Entire Suite Freezes On Start Up?
Jul 23, 2011Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens.
A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.
I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates.
CorelDRAW Graphics Suite X5 :: Mixing Vector Graphics And Bitmaps
Mar 14, 2011I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies View RelatedCorelDRAW Graphics Suite X5 :: Exporting Web Graphics To Correct Size
Dec 1, 2011How on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
CorelDRAW Graphics Suite X5 :: Missing Text Or Graphics When Printing?
May 9, 2011X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
CorelDRAW Graphics Suite X6 :: Opening AI File That Have Linked Graphics
Jun 19, 2013I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
CorelDRAW Graphics Suite X4 :: Links To Graphics Are Broken When Using Help File
Oct 18, 2012I just used the help file for the first time in ages and noticed all the links to the graphics are broken hence no diagrams etc. I tried to search out where they are usually stored and it gives some weird Address under properties. It's a vba so suppose it's a database? How do I restore the links without having to do a re-install?
As to the pen: How do you stop the annoying over-the-top predictive curve that happens past the node in the next section after a long drag to form the first curve. i.e. you simply want to draw a straight line after dragging out a curved section previously and you get this unmanageable curve to deal with ?
CorelDRAW Graphics Suite X3 :: Blank Blocks Behind Text And Graphics?
Jan 2, 201302012013010.jpg
Blank Blocks behind text and graphics
CorelDRAW Graphics Suite X5 :: Error While Installation - No Graphics Shown
Dec 6, 2013After a "format c:" i´m trying to reinstall my corel x5. But after starting the install-progress i only can see this:
What does it mean? I can´t imagine where this comes from?!? How to handle this fault?
CorelDRAW Graphics Suite X5 :: Dual Graphics Cards
May 22, 2011I am building a new desktop and am thinking about using dual graphics cards for my work in Corel X5. Ive seen nothing in technical specs or min requirements that even alludes to the program being able to take advantage of an SLI configuration (evga gtx 465 superclocked with 1gb ddr5).
View 5 Replies View RelatedCorelDRAW Graphics Suite X5 :: Export PDF When Graphics Has EPS Files In It?
Jun 9, 2011Client supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.
View 3 Replies View RelatedCorelDRAW Graphics Suite X6 :: Print Merging Graphics
Nov 6, 2013I have a client that I laser engrave parts with a variety of graphics, about 35 different designs that fit on 10 different parts and all the designs are different sizes on the parts. I use a fixture that holds 40 parts, two rows of 20, for each type of part. I have a master file for each part that contains a page with each graphic laid out as in the fixture so that I can simply go to the page and select the graphic in the right position for the fixture and paste it into a "lasering" file. The lasering file is just as many pages as I need to run the order and is much smaller than the master file.
That works fine now and is actually pretty quick and easy to setup, but I just found out that they will be adding about 35-40 designs a month. That will make the master file huge and very cumbersome to manage, not to mention the order sheet (spreadsheet) will get huge in no time at all. I can envision it becoming a nightmare to manage and mistakes will be frequent due to the sheer size of the files.
What I would like to do is have a spreadsheet with the graphic and a quantity and merge that into the lasering file instead of doing it manually. I am very familiar with merging data but I don't know if it's possible to merge a graphic from a database or somehow import the graphic into corel.
CorelDRAW Graphics Suite X5 :: Unable To Uninstall Graphics
Jun 13, 2011When I checked my computer for any any unused programs I got see this coreldraw (r) graphics suite x5 installed. When I got to uninstall it showed and error message that some sort of setup.xml is missing. When I checked this programs folder I got to see that there are two corel folders [Corel and Corel (2) ] in my C: drive. After checking all the file locations of different corel applications I deleted the Corel (2) foder. After that also corel was not being uninstalled. I don't want to re-format my computer only for this
View 1 Replies View RelatedCorelDRAW Graphics Suite X5 :: Size Graphics For Web
May 10, 2012Im using draw x5 graphics software and want to know where to find useful for properly sizing web friendly graphics. I want to build a banner and an icon for my new site.
View 3 Replies View Related