CorelDRAW X5 :: Convert Files Back To X4?

Oct 23, 2012

I am thinking about going back to x4.  can i convert all my x5 files back to x4?  also, can i run x5 and x4 on the same computer?

View 2 Replies


ADVERTISEMENT

AutoCAD Express Tools :: How To Convert DWF Files Back To DWG Format

May 4, 2012

How to convert .DWF files back to the DWG format?

View 2 Replies View Related

CorelDRAW X3 :: Hard Drive Crashed / Need To Convert Exported File Back To CDR

May 3, 2011

My hard drive crashed so I lost a lot of my CDR work.  I was able to get some back in the form of JPG.  These were files that I drew in Corel and Exported as JPG. Is there anyway I can get them back into Vector without re drawing?  I figured there had to be a way since they were originally drawn in Corel.

View 2 Replies View Related

CorelDRAW Graphics Suite X3 :: Converting Files From CD6 Back To CD3

Oct 28, 2012

I had recently downloaded CorelDraw 6 upgrading from CorelDraw3. I'm guessing that the CD6 automatically converted all my files that were CD3 to CD6...Any who...I decided that I like corel draw 3 better and redownloaded it. Now I can't open my CD3 files now..Even though my files says CD3 I still can't open them.

What can I do?

View 2 Replies View Related

CorelDRAW Graphics Suite X5 :: Batch Convert DWG Files

Jul 28, 2011

I've received quite a few DWG files and I would like to batch convert them into PDFs so I can share them with the sales staff. Also, DRAW deals with PDFs much better than DWG and the added feature that the PDFs will have all outlines converted to black.

My workflow now is to open each DWG in DWG True view and plot it to PDF using there built-in engine. It works but I have to convert all outlines to black inside DRAW plus I have to do each file one at a time. I've downloaded a trial version of deskDOC DWG to PDF with less than stellar results .

View 5 Replies View Related

CorelDRAW Graphics Suite X3 :: Batch Convert Gallery CCX Files To CMX?

Feb 19, 2009

Some years ago purchased CorelGallery 1,300,000. The vector clipart came in a .CCX format.

However, the Gallery browser no longer loads into my Service Packed Windows XP. Also XP and Vista cannot display .CCX thumbnails in their respective Explorers.

Today I discovered if I change the file type from .CCX to .CMX. the thumnail displays.

My challenge is how to covert about 500,000 files from one to the other en masse.

View 11 Replies View Related

CorelDRAW X6 :: Can Convert Embedded Bitmaps From Within PDFs Into Vector Files

Jul 6, 2012

I create vector drawings in Microsoft Office Visio and I need to be able to convert raster images from PDFs into vector images compatible with Visio. I've tried tracing the bitmap with various options but the line quality produced when saved to a .svg file is not adequate for our needs. Images from a PDF that are not embedded work perfectly by saving to a .svg file, but the bitmap comes in as one unusable entity. Simply put, can X6 convert embedded bitmaps from within PDFs into vector files? 

View 6 Replies View Related

CorelDRAW Graphics Suite X5 :: Can Import / Accept / Convert INDD In Design Files

Jun 14, 2012

Can Corel X5 import/accept/convert INDD (In Design Files? Can Version X6?

View 6 Replies View Related

Photoshop :: How To Convert VBScript Back To JPEG

Mar 14, 2005

I have Windows XP, last night i moved all JPEG Images in my computer and when i opened it back up I noticed that my JPEG images are no JPEGS!!! I can't open my picture any more??? I check their properties and they are now VBSCRIPT files?? I want them back to JPEGS so I can view them.

View 4 Replies View Related

Illustrator :: Convert Pattern Back Into Original Art

Feb 21, 2014

Is there a way to convert a pattern back to it's original form?  I know that you can edit a pattern, once it has been created, but what about reverting back to the starting point?
 
I have a student who created a rather complex drawing and then converted it to a pattern, the design does not work well, because it is too elaborate, he has three different art pieces. A record, a jukebox and a piano. These are all great illustrations on their own, but do not make a good pattern.  Is there a way to undo the pattern?

View 4 Replies View Related

Photoshop :: Convert 3D Spherical Object Back To 2D Asset?

Sep 22, 2012

I have a full spherical panorama image in a psb format that I converted into a 3D spherical map in order to cleanup, clone a little and add nadir art. All good there but can't figure out how you get the 3D object back into the full flattened psb format rather than just exporting/saving the view the 3D camera is looking at?

View 1 Replies View Related

Illustrator :: Why Does Adding FX To Either Object Or Text Outline Convert Them Back To Pixels

May 12, 2012

Why does adding a FX (Distort - Ocean Ripple) to text (converted to outlines) or a basic shape, change it back to pixels and blocky? Why doesn't it stay as smooth bezier curves? Is this a possible bug?

View 3 Replies View Related

AutoCAD 2013 :: Convert Drawing Using Asian Bigfont SHX Font Back To English

Aug 15, 2013

Is there any way to convert a drawing using the Asian Bigfont.shx font back to English? The font can be changed, but the characters remain un-readable. Mostly ? and letters and symbols but no words. It seems like it needs to be translated, and not just converted, but it is not displayed in any form that could be translated.

View 3 Replies View Related

AutoCAD Inventor :: Convert Weldment Assembly Back To Regular Assembly Template

Jun 6, 2012

I am using INV 2012 and I wan to to know a trick how to convert the weldment assembly back to regular assembly template.

View 1 Replies View Related

AutoCAD 2010 :: Convert Block Back To Title Block Or Border

Feb 15, 2012

We have a title block and border which is used in MS.  If this is referenced using AMTITLE then it acts as expected.  We issue these to some external people to create our drawings but they have been using CTRL-C and V to place them in a new drawing.  ACAD does now not see them as a Title block or border but as blocks.  We have a process to bring DWG's into SAP and this will check for a title block and border. 

The issue is we need to fix these drawings and currently this means removing the borders and title blocks and placing new ones then adding all the attributes again.  Is there a way to convert the blocks back to how they should be?
 
AutoCADM 2011 SP2
XP 32-Bit SP3

View 4 Replies View Related

Photoshop :: Convert Full Resolution Files To Web Based Files

Jun 6, 2012

I am working on a museum project. I have been asked to convert full resolution files to web based files using "Save for Web and Devices". The problem is in the file naming. Museums typically use accession #s for each work. Example   1999.63.102  So the digital file would be named 1999.63.102.jpg (or tif).

When I attempt to save the file using "Save for Web and Devices" the resulting name is converted to 1999.jpg  I believe the . (periods) to be the culprit. There are hundreds to do so renaming is not an option. This does not occur when I use "Save as".

View 19 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Convert DGN Files To DWG Files?

Feb 8, 2013

I want to convert my DGN files to DWG files.

So I write this code in LISP:
 
(defun C:Batch_DGN2DWG (/path dgnfile SDI_Mode) (setq path "C:\DGN\" ;;Default path for DGN files location. DGNIMPORTMODE 0 ;;Imports the DGN file in a new drawing file. SDI_Mode SDI ;;Save Current SDI MODE SDI 1 ;;SET Single Drawing Mode for AutoCAD. );;setq (foreach dgnfile (vl-directory-files path "*.DGN" 1) (progn (command "-dgnimport" (strcat path dgnfile) "" "" "" "y" (strcat path dgnfile ".DWG")) (delay 100) );;progn );;foreach (setq SDI SDI_Mode) ;;restrore SDI Mode to previous value.)

but I can't finish it!

I attached some DGN files for test purpose.

View 9 Replies View Related

Illustrator :: Convert Expanded Appearance Rounded Rectangle Back To Sharp Cornered Rectangle

Mar 12, 2013

Any quick tips to convert an expanded appearance rounded rectacngle back to a sharp cornered rectangle?

View 6 Replies View Related

Illustrator :: Convert Text Path Back Into Line Path In CS 5?

Jan 9, 2013

I've tried every permutation of copy and paste; I renamed the path to path. It looks like a path when I add stroke, but it does not behave like one.  I can't cut it or join it to any other path. It remembers it's text path status. I'm running OS X 10.7.5.

View 11 Replies View Related

Illustrator :: Convert Text Path Back To Regular Path?

Mar 20, 2014

I accidentally converted a path to a text path. I searched the forum for how to convert it back to a regular path. The answer I found said to select the path and hit Command+C+F. This gives me another text path! I now have at least 6 copies of the path in my files but they are ALL text paths and none are visible with a stroke.

View 5 Replies View Related

CorelDRAW X4 :: How To Get Color Docker Back

Oct 8, 2011

The vertical color docker that had all of the fill colors on the right side of my screen got closed down and I can't figure out how to get it back.

View 4 Replies View Related

CorelDRAW X4 :: Menu Bar Vanished / How To Get It Back

Jun 8, 2011

the menu bar is gone and I can't figure out how to get it back. 

View 1 Replies View Related

Lightroom :: How To Get Back Deleted Files

Apr 11, 2013

So last week I shot a wedding. I just imported pictures from my computer and have been working on them. Tonight I sit down to edit and was going to delete another catalog not thinking and deleted all of my pictures including my wedding folders. Those had thousands of files most of which I had already edited. They went to my Recycle Bin so I do still have them but now they are not edited. Is there ANY way of getting what I had edited back?

View 6 Replies View Related

CorelDRAW X5 :: Master Layer To Back Of All Layers?

Jul 1, 2010

It seems to me in X3 I could create a master layer and put it infront or behind all other layers. Now it seems that I can't do that.

How to make a master layer in x5 and move it behind all other layers in all pages at once?

If your answer includes going to the object manager and moving it on all the pages, don't bother. I'm not doing it for 400 pages.

Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6

View 14 Replies View Related

CorelDRAW X4 :: How To Get Default Color Palette Back

Nov 9, 2011

After a little while the color palette suddenly became glaringly fluorescent and no amount of rebooting could get my original color palette back. After that I opened the Palette Editor under Tools and fiddled around the Sort button settings there. This changed the order I was seeing the colors in my palette which stayed as fluorescent as ever and the original sequence would not come back no matter what I did. I read up a bit and played around with the Color Management settings-in vain. As a last resort I have uninstalled and installed the program again-to no avail! What should I do? I tried the F8 start as well-that didn't work either.

View 3 Replies View Related

CorelDRAW X5 :: Pen Tool Straight To Curve And Back Again

Mar 18, 2011

I cannot work out how to consistently go from drawing a straight line to drawing a curve and then back again to a straight line....

The first two steps are fine, but when I go to the third step of trying to draw a straight line after a curve I am having problems, it does not seem to be consistent - I click on the last node which then displays the line next to the pen but if I try to click for a straight line - it makes a curve!

If I use the Alt key and click the node, this also sometimes works but not always and I can't for the life of me work out a way to get it to work in the same way all the time.

View 14 Replies View Related

VideoStudio :: Get Project Files Back To X2 State?

Aug 13, 2012

crashes in VSX2 (and all previous versions for that matter). At Corel's suggestion I installed the trial version of X5. In the meantime, I had my X2 working a lot better.

But I thought I'd take a look at X5 and see how it looked, since I'd gone to all the trouble of installing it. In order to try it out, I opened some of my projects and played with them a bit. I didn't mean to save them, but apparently I must have because now I can no longer open them in X2. Windows explorer thinks they are X2 project files, but when I try to open them in X2 nothing comes up. Then I try to open them in X5, and sure enough there they are. Project properties confirms they are now X5 project files. I tried to do a save as, but the only options are X5, X4 and X3. No choice for X2.

This is a problem because I haven't decided if I want to buy X5 or not. If I do, fine, but I don't want to be forced into it just so I can work on my old projects. Is there any way to convert them back to a format that X2 will open?

View 4 Replies View Related

AutoCAD Inventor :: Back Up Files For Library?

Mar 21, 2012

I back-up a 23 GB library to two external hard drives about once a week. I always wipe out the previous back up set and copy and paste fresh each time and let it run.

Ive also been thinking of adding an online backup (carbonite etc) as another failsafe.

How do automatic back-ups work in the realm of parametrically linked files such as Inventor. Im a little worried about that concept.

View 4 Replies View Related

AutoCad :: How To Get Missing SHX Files Dialogue Back

Mar 26, 2012

When I open a .dwg file, 'Missing SHX Files' dialogue pops out. I checked the box 'Always perform my current choice', and clicked 'Ignore the missing SHX files...'. Then .dwg opened, but all text information were not displayed. I closed the .dwg, and reopen again, but this 'Missing SHX Files' does not pop out again.

How to get this 'Missing SHX Files' dialogue back?

See the attachment.

Untitled.png

View 4 Replies View Related

Photoshop Elements :: Converting DNG Files Back To JPG?

Feb 15, 2014

I have used the Camera Raw editor for the first time.  The .jpg subject file was saved as a .dng file.  I don't know how to change that back into .jpg.

View 1 Replies View Related

Photoshop Elements :: Cannot Get Back To Autosave Files

Jan 2, 2013

setting up elements I cannot get back to the autosave files.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved