I am Using x3(with all patches installed) This problem has persisted throughout all patches. Often times when I combine 2 objects, the clipping hole does not show through. The objects are combined, but they appear as one solid object. It only happens occasionaly. I have tried virtually everything to make it combine properly, but to no avail.
View 13 RepliesI have two layers. The lower layer is text. The upper layer is a pattern. I want to show the pattern on the text only, but do not want to show any of the text color (pattern is black, so is text). How can I accomlish this?
Currently I tried to apply the text layer as a clipping mask for the pattern layer but the text color shows through.
I am using Version X6. Is there a way to show white/black clipping on images while I am Adjusting or Editing them?
View 2 Replies View RelatedI am working with a 3D model, we are using a addon for ACAD which allows us to clip the view port (ie: allows us to look at everything on the drawing but only between certain elevations { for example I could clip my drawing to only view between elevation (Z) 1000 - 1020 })
My question is: Is there any way to have text/Polylines show up even if they are not within the clipping range, specifically we would like to have a grid set up say at 0 elevation, and have it the same grid when we clip through our levels without having to manually copy it to each level we plan on clipping.
is there a way to only show hidden lines on a shaft with a hole in it to only show quadrens instead of 30 lines around the arc.
View 9 Replies View RelatedI wish we could have the "reveal clipping" feature in Library, so while we are reviewing sharpness, we can also toss clipped pix. Now we have to go to develop and go thru them all over again AND the 1:1 previews are slow there.
View 10 Replies View RelatedI want to insert the blue shape into the iphone shape. I've clicked on clippin mask > make but it is not working. The iphone layer is "Clipping Path" and the blue shape layer is "Path". I've also tried to invert the order of the two layers but its not working either.
View 1 Replies View RelatedIn the attached part, I am trying to show a hole drilled at a compound angle. I have attached a pic of what the part is supposed to look like. I am having trouble laying out the plane on a compound angle. The hole should be centered on the width of the flat and drilled through. 15° angle one way and 20° another way.
The ipt file attached is really messy in attemps to acheive the compound angle.
I am using Autodesk Inventor 2013.
I have a small problem: I have several images which I need to import / combine with an hole pattern. Then I just need the outlines of the holes (each color) for laser cutting. Doing by hand and coloring each dot is difficult, how to make this in some few steps ?
View 2 Replies View RelatedI found out that there is a way to show clipping areas in Photoshop when adjusting levels via an adjustment layer. While moving the slider, you hold down the ALT key.
I tried this in PSP X3 and it does not work. Any feature for seeing the clipping preview is available in Paint Shop Pro? It's a nice feature.
The Hole and thread notes command does nothing in a drawing.
I point to a thread hole, the mouse cursor changes to the right simbol but no note is generated.
What is the best way to get a hole table on a converted SW file. Our Engineers use Solid works and I can easily import the file but when I try to create the hole table in the IDW file it comes up blank.
Do I need to recreate all the holes so they are native to Inventor? or I am missing a conversion setting.
Autodesk Inventor 2014 64 Bit Edition Build 170
Dell XPS 8300
Processor: Intel Core i7-2600 CPU 3.40 GHZ
16GM Memory
64 Bit Operating
Windows 7
I'm preparing some vector for laser cutting and engraving,I'm having troubleThe curve can also combine the two, I got to tell one more screenshot [URL]
View 5 Replies View RelatedCan I combine 2 shortcuts into one? There's a procedure I use repeatedly (in the absence of a vector blur tool in Draw) - Convert to Bitmap and Apply Gaussian Blur. The settings in the former would obviously always be the same - resolution, colour, transparent back etc.
Basically to be able to select the vector object and go straight to the gaussian blur settings.
Illustrator files don't show up in Acrobat file list when trying to combine files into a single pdf
View 9 Replies View RelatedI have 100 of pages of a clients logos, I want gather them into a single A3 page, normally we can do this thing by giving print command (Imposition tool in print preview) but we can get PDF output or can directly print it, but I require cdr, so is this possible? I tried making PDF and importing it into corel but most of logos not coming well bcz those are bitmap, some bitmaps are viewing as a horizontal sliced.
View 3 Replies View RelatedI am somewhat new to graphic design and have a coreldraw design that needs to go to print. The company's Pre-Press Mgr sent me this message:
the background is made up of a million separate layers that each contain a clipping mask and an image. The file size is huge due to the sheer number of these layers and may have trouble trapping and imaging. The bulk of these layers and images could all be combined in to one composite background image to reduce the file size, trapping issues and imaging issues. You do not want to include vector elements that you want to remain sharp, but for the soft background effects it should be one composite image.
Does this mean to take the layers that make up the background and "Group" them and/or convert to curves?
I'm only using one one color print and I need to put a '''ballerina" hole in a big fat "D". How do I turn the ballerina into a hole? The letter "D" is pink and I of course can put her on the top layer of the "D" but how can I make her a hole?
View 2 Replies View RelatedI'd like to use an "NPT" Hole Dialog thread but it doesn't show up in the Thread type list.But it does show up in the Thread Dialog/Specifications Tab/ Thread type list so it's available.
I definitely have "NPT" in my Thread.xls & I have my Options/Files set to point to the correct Design Data folder.
Inventor Suite 2013 Ultimate
I have created a macro to change the Country of Origin text in a cd label file and I also have created a macro to remove some guide rings in the same label file but I am unable to combine the 2 macros into one macro I can run on the cd label file. The code for each macro is as below.
Sub Rings() ' Recorded 27/04/2012 ActivePage.GuidesLayer.Visible = True ActivePage.GuidesLayer.Visible = False ActivePage.Layers("Guidelines_2").Visible = True ActivePage.Layers("Guidelines_2").Visible = False ActivePage.Layers("Guidelines").Visible = False ActivePage.Layers("Guidelines").Visible = True ActiveLayer.Visible = False ActiveLayer.Visible = True ActivePage.Layers("Graphic Elements").Visible = False ActivePage.Layers("Graphic Elements").Visible = True ActivePage.Layers("Guidelines").Visible = FalseEnd Sub
'TextReplacePublic Function FindReplace(ByVal str As String, ByVal toFind As String, ByVal toReplace As String) As String Dim i As Integer For i = 1 To Len(str) If Mid(str, i, Len(toFind)) = toFind Then ' does the string match? FindReplace = FindReplace & toReplace ' add the new replacement to the final result i = i + (Len(toFind) - 1) ' move to the character after the toFind Else FindReplace = FindReplace & Mid(str, i, 1) ' add a character End If Next iEnd Function
Public Sub TextTranslate() Dim s As Shape ActiveDocument.BeginCommandGroup "Text Translate" For Each s In ActiveDocument.ActivePage.Shapes If s.Type = cdrTextShape Then s.Text.Story = FindReplace(s.Text.Story, "Recorded in Ireland", "Recorded in China") s.Text.Story = FindReplace(s.Text.Story, "Printed in Ireland", "Printed in China") End If Next s ActiveDocument.EndCommandGroupEnd Sub
how I could (1) join the 2 macros above or (2) create a batch macro for each macro above I could run to update all coreldraw cd label files in a folder.
when i trace pictures in BW i often encounter a problem to extract so many small pieces in graphic in the same color.i wonder, if there is some hotkey ( by click :-) to combine together all vectors with the same color, and leaves the rest.
View 3 Replies View RelatedI have been trying to learn the chiseled effect on Discovery Center the video tutorial the girl voice came so distorted that I decided to look up the written version .In the step 3 they ask to Arrange Combine but Combine does not light up
View 6 Replies View RelatedI've got a template with a set of Object defaults for an Inch drawing and a set for a Metric drawing. I've just noticed that within my metric set, if I insert a hole table with tapped holes, the font on the tapped holes doesn't match the other hole types. I'm searched around, but all the settings for the hole table style reference the same text style. (Please see the attached image.)
So is there a way to set a certain hole type to have a certain font or size within a hole table? Because if there is, I'd obviously like to remove it..... But I can't seem to figure out where the issue is.
I am trying to add a hole to an existing hole chart. I drop the part into a new drawing, set the ordinate "zero", and add a hole chart by selecting a few holes. When I attempt to edit the chart: click chart, right click "edit", click add hole, select new holes, right click to create, the "create" selection is greyed out and all I have to choose from is cancel. I searched the forum here but could not find a reference to this a know issue. Am I doing something wrong or is this a glitch of 2013.
We are running win7 x64 machines and this happens on both the 2013 Ultimate and Premium editions of the product.
I have had this problem intermittently for a few weeks since going to Inventor 2013 SP1.1. I have a part within an assembly and that part has holes created in it before assembling it with other parts. Now when I try and create a hole table in a drawing of the assembly I cannot select hole edges and the hole table is blank when trying to create it automatically from view selection. I originally thought it may be an alignment issue but I have since aligned everything correctly and it still persists. I can create the hole table if I import in just the part into the drawing but it will not allow me to create the table on the whole assembly.
I can also create the hole table if I use "centred pattern" and create cross hairs on all of the holes however it does not give me correct annotations for the holes as shown in attachment and I can manually change the annotations but seriously this should not be required. As shown in the screen shot it reads as A1 down to K1 instead of A1 to A10. .
Question: Is it possible to control the Hole Dimensions called out on the Hole Chart? As in controling leading/trailing zeros for main hole dim, alt home dim and tolerances? Can you combine the Main Dim with the Alt dim in a single column, separated with parentheses? (same with tolerance?)
View 5 Replies View RelatedSometimes when applying outline to text, as we increase the outline thickness, certain holes in the text are not being filled up, no matter how thick the outline is.
Is there a solution for this? As I think it's not so nice with holes here and there.
unable to combine, trim, weld objects
View 4 Replies View RelatedWhat is the fastest way to take a directory of individual corel files
page1.cdr
page2.cdr
page3.cdr
...
page 50.cdr
page 51.cdr
page52.cdr
and combine them into one single 52 page coreldraw file for printing/imposition.
Color Printing Forum : Print Directory
I would like to use the hole command to place a hole in a part. When I place the hole it won't allow me to use one of the origin planes to locate the hole from. Can I only locate holes off edges?
View 4 Replies View RelatedI have an assembly that contains a part and a hole feature (the hole feature is at the assembly level). Using the api, I'm trying to get the hole location relative to the part's coordinate system in a without using the holeplacementdefinition.distance property, this way I can get the hole location regardless of the way it was defined.
View 2 Replies View Related