AutoDesk Smoke :: Control Surface Support
Oct 2, 2012Is there a plan to support control surfaces like the Tangent Wave or Elements ?
View 6 Replies
ADVERTISEMENT
AutoDesk Smoke :: Can Smoke Support OFX Architecture
Oct 18, 2012Can Smoke support the OFX architecture?
View 1 Replies View RelatedAutoDesk Smoke :: FBX Support Without Projection?
Oct 19, 2012Don't get the AD strategy.... ok, I can import fbx....without projection tools? it such a basic tool, specially when AD has already developed the tools over other similar systems...
View 4 Replies View RelatedAutoDesk Smoke :: Will 2013 Support Component Output
Feb 26, 2013I'm currently running Smoke 2011 on a Mac Pro and we are feeding a Professional Grade 58" Panasonic Plasma equipped with HDMI and Component connections. We are unfortunately limited to using only the HDMI connection because Smoke 2011 doesn't support component out. Using the HDMI connection means we're limited to a 60Hz refresh rate which, generates flickering cross fades, and strobing with fast moving video. The component connections allow us to utilize a 100Hz refresh rate which eliminates these issues. After a little research, I have learned that Panasonic does not make a professional grade plasma monitor that supports higher than 60Hz through HDMI.
View 1 Replies View RelatedAutoDesk Smoke :: Blackmagic Site Showing Support For Ultrastudio
Apr 12, 2013Just noticed this at Blackmagic Design's web page for it's Ultrastudio line.It clearly shows Autodesk Smoke in the supported software! Something in the next release maybe?
View 2 Replies View RelatedAutoDesk Smoke :: Adjust Box Control?
Sep 14, 2011Which option to set for any case on Adjust box.
There is a box below the Stablizer button. Pressing the Adjust Box for a while, it pops up with 3 options which are Adj off, Adj Axis, Adj offset. I've used "Adj off" all the time as default.
On the other side, there is one more Adjust box for Vertices. I don't get it either. I just used it set to "Adj Tangents" as any tutorial said.
I tried to understand it from user guide, but it is still unclear.
AutoDesk Smoke :: Possible To Have A Control Hotkey Setup
Jun 21, 2012I have used smoke for a few years now, and one of the things that I find frustrating is the camera controls in action.Would it be possible to have a control hotkey set-up like maya/XSI/3DS? Some other softwares allow you to choose the keyboard set-up.
Using the maya set-up:
Alt - left mouse : tumble
Alt - middle mouse : track
Alt - right mouse : dolly
This means while looking though the lens you can move the camera in any orientation, you only need to hold down the alt key and use the 3 button mouse/Wacom to navigate.
AutoDesk Smoke :: Scrubbing In CFX Playback Control Is Slower
Nov 29, 2012When i scrub playback control in the cfx , it's slower compare to if i scrub the same thing (same viewport layout) inside the timing editor timeline. In timing editor the scrubbing response is a lot smoother even when we're looking at the same objects on the viewer. The playback control need to be fixed.
View 2 Replies View RelatedAutoDesk Smoke :: Control 2 Macs With One Keyboard And Mouse
Nov 6, 2013I know most of us have 2 computers in our suites and would be nice to controll both computer without having to use 2 mice and 2 keyboards. Right now I am using 2 computers, a mac pro and a macbook pro. I would like to use my MacPro's keyboard and mouse to control the macbook pro much like a mouse and keyboard on a second display. I've been using an application called teleport, but it doesn't allow me to use keyboard commands.
I've heard/used synergy, but it's to much work for the final product.
AutoDesk Smoke :: Sensitivity Control While Dragging Clip
Nov 22, 2012what i like in fcp, i can easily doing cut very fast, because the clip is not 'sticky'. So i can grab the clip and move and i got a very 'light' drag. The timeline is more 'slippery' ... i don't know how to say it. The drawback is : it's sometime become too sensitive so i can easily by accident move the cut and mess up the edit. I become paranoid , so i have to hold my breath while clicking :-) . But again the pros : it's easy to do fast edit or to crumble cuts around.
In the other hand .. what i like in smoke , this will rarely happen that i accidentally move the clip while i intend to click it. It's more 'sticky' to the timeline. So there's like more friction while try to drag the clip (only when first click/drag the clip not when the clip is already floating). The drawback is sometime i feel , it's hard to do some fast cut just by moving the clip around. :-) well, as usual, if we have 2 options, option A and option B, then we will tend to ask : do i have option C ( somewhat between A and B) ?
I'm asking is there any sensitivity control while i drag the clip. So it's between FCP and SMOKE. Something like a 'treshold' parameter.
AutoDesk Smoke :: .Cfg Didn't Seem To Have Any Control Surfaces Line
Apr 21, 2011I'm noticing with the new 2012 released, start up times are much slower. This seems to be caused by a 3 minute long control surfaces: intialising.The only control surface I'm using is a Intos tablet.Is there anyway to by-pass this?The .cfg didn't seem to have any control surfaces line.
View 2 Replies View RelatedAutoDesk Smoke :: Spline Control Of The Gmask Feather?
Dec 4, 2012In gmask, i switch the softness to 'tracer' so i got individual control of each the control points (cp). But seems that the feather's cp doesn't have its own tangent control. Is is hidden ? how can i turn it on ? or is it not available ?
View 1 Replies View RelatedAutoDesk Smoke :: Using Motion Vectors To Control Texture Movement?
Feb 2, 2013I'm specifically looking into using motion vectors to control the position of a texture. For a better idea of what I mean. See this video, especially at 1:08
[URL]
I'm sure some people will call this the "Paperman" effect.
I see a lot of information out there on how to use motion vectors to do motion blur, but not much else. I'm sure they are capabable of soo much more! All that movement information from 3D in a 2D environment sounds great!
I have motion vector channels correctly exported from Maya and I'm wording which CFX combination I would use to composite a texture in a way that it was controlled by the movement information of the motion vector channel.
I know these 4 CFX can read motion vectors.
Motion Blur Node
Timewarp Node
Pixel Spread
Motion Analysis
But so far, no luck in achieving the desired effect.
AutoDesk Smoke :: Intersect 3D Surface
Nov 26, 2012How can i make something like in the screenshot , i want to create an intersecton of 2 surfaces. In smoke, the z-order rule : the surface have to be completely behind or in front of other object (not partial). is it possible ? I tried couple of sorting combination but never got good result.
View 4 Replies View RelatedAutoDesk Smoke :: Taper Image / Surface In Action?
Feb 10, 2013Is there a way to taper an image/surface in action?
To explain: for my project I am taking hi res stock photography, separating out the mid, fore and backgrounds saving as individual layers then bringing into action.
With my current image there is a sea and sky. To make the illusion of 3d scenes I am angling the surfaces down there natural line of perpective to add depth so that when I slowly track the camera from right to left there appears to be depth and parallax.
For this example I am tilting the sea from being perpendicular to the camera to being tilted right back. When I do this the top of the picture which is now further away from the camera eye appears smaller. To compensate for this I would like to 'taper' the object. I know I can set the surface to being bicubic but then I have to work with bezier handles as moving the vertices bends it all around.
Is there either a way to make the handles have no beziers or is there a simple taper tool I can use?
AutoDesk Smoke :: Smoke And AJA Dual Stream Stereoscopic Output
Aug 29, 2013I know that the AJA Kona 3 card has 2 outputs. Can Smoke send one eye to one channel and the other eye to the other of the Kona 3 card? Dual Stream output is what I am really getting at.
View 4 Replies View RelatedAutoDesk Smoke :: Smoke And Sub-blacks / Super-whites
Feb 26, 2013Is there any way that Smoke can see/output sub-blacks and super whites? Can't find any way of seeing them on my scope, Smoke just clamps everything. It won't even see anything below zero in order for me to make a correction on it, everything seems to be clamped on import. I'm using ProRes HQ footage.
View 9 Replies View RelatedAutoDesk Smoke :: Best Plugin To Do Spline Warps In Smoke
Jan 16, 2014What is the best plugin to do spline warps in smoke?(need something like the distort in flame) I notice revisionfx don't make a warper for smoke on mac.
View 7 Replies View RelatedAutoDesk Smoke :: Importing And Using Alpha Channels In Autodesk
Oct 2, 2012I am experimenting with Smoke 2013 pre-trial and I am having issues with importing images and video with alpha channels.
1. If I have a layered Photoshop file or png with an alpha channel (a still frame lower third), I see that I can import it as a multi layered clip, but what is the best way to have it in the sequence to show up properly?
2. If I have a QuickTime in animation format or Pro Res4444 format with an embedded alpha, how can I import that file to show and cut it on a top layer to animate above my video?
AutoDesk Smoke :: Selections In Smoke As In Combustion?
Jul 10, 2012Does Smoke have selection functionality similar to that of Combustion? As an example, you might want to selectively blur part of an image. In Combustion, you would draw a selection and then apply an operator above the selection to achieve this. I don't see a similar selection tool function in Smoke, but I imagine you could achieve the same effect by duplicating a layer and using a Gmask via the Wipe timeline FX.does Smoke not have a selection tool similar to Combustion?
View 3 Replies View RelatedAutoCAD Civil 3D :: Autodesk Ignorance For Windows 8 Support
Mar 14, 2013I started using AuoCAD Civil 3D 2013 on my windows 8. It is crashing a few minutes after opened. When I run it in the mode "Civil 3d as Autocad" everything works ok, but I can only visualise and plot the drawing and move the labels.
First, I thought that I had a problem with my PC so I tried googling this issue, updating my version to SP1 but nothing got fixed. Throught my research on the web It seems that mostly of Windows 8 users are facing problems using Autodesk products on their computers especially whem my co-worker was facing such a similar issue on running both of AutoCAD 2012 and Revit 2013 on his windows 8 and I can not describe how much did we got annoyed for such problem and the circumstances for not able to complete our work tasks using Autodesk products.
The point is how Autodesk is going to give a final solution to Windows 8 incomptability issues. Will be there anything further or it is just Windows 8 users are forced to leave their operating system and back for older one without any incomptaibilty issues like Windows 7?
AutoCAD Inventor :: Making Support And Stiffening Ribs On Curved Plastic Surface?
May 22, 2013I am trying to make support ribs on a curved plastic surface to make the construction stiffer for a snow puncher.
(Just like on the attached picture, "pic 1".)
But I am having trouble doing this over the curved surface towards the top end of the rib.
As is now I sketch the shape of the rib in both ends and loft it over a sketch (see attached picture, "pic 2"), and then revolve to get the ends.
But this gives problems, result is not good and it's very time consuming.
If this was on a flat surface it would be easier, but now I get a lip along the loft and along the revolve on the top end of the rib.
I'm using Inventor Professional 2013 Student Version.
AutoDesk Smoke :: Importing TWs To Smoke
Jan 10, 2014Whats the dealing with importing TWs to Smoke? I have a show that's 70% keyframed with timewarps and need a way other then baking the effect to bring it into Smoke. It's comming from FCP7 and we have Automatic Duck but neither the XMLs or AAF bring anything other then the first speed of the clip. Any way to retain the keyframes?
View 1 Replies View RelatedPremiere Pro :: Using Control Surface With The Clip Mixer
Jan 22, 2014I'm contemplating purchasing a Mackie MCU to automate some of the volume edits I have to make using 5 tracks in the Audio Clip Mixer over 80 hours of video. I've tried to contact Adobe support, but they are about as cluless as a bag of hammers. When I asked if the clip mixer works with a control surface (after 4 calls and 4 different agents) I was told no. Which is total BS as there is toggle in the clip mixer called "Toggle Control Surface Clip Mixer Mode". They read from scripts and have no clue what they are talking about. I guess I should not be surprised as its an outsourced call center staffed with drones who have never even used the software, much less in production! Adobe you should be ashamed of your support, it's appauling! (BTW I own an online Magazine in the 3d industry and will be writting an article about your appauling support soon)
Anyway, onto my specific questions:
1) The Mackie MCU has overlay cards for button mappings for many different apps, but PP is not one of them. What functionaliy is mapped to the control surface specially from PP and the clipmixer?
2) Is there a way to group channels so that keyframes can be written to multiple clips at the same time by using one fader?
3) In the clip mixer there is a keyframe toggle, does such a toggle translate to the control surface?
4) Sometimes I want to manually keyframe, rather thanan make adjustments while the playhead is moving, so I will simply click the fader slider to write a keyframe, manually move the playhead and then adjust the fader to write the subsequent keyframes. As faders on a control surface can not be pushed like a button, is there a way to generate a keyframe from the control surface?
5) Are there any known limitations using the control surface vs the software for both the clip and track mixers?
AutoCAD Inventor :: How To Control A Design On Autodesk
Jan 23, 2013I have made a design on autodesk inventor along with gear and motors which give input to the mechanism. (Stewart Platform)
I am able to test the design by giving a random rotary input to a motor component which features availabe on Inventor.
However, I want to control that input somehow. I just want to enter the final coordinates the design needs to reach and the motors should be actuated automatically so as to reach those coordinates.
I have a MATLAB code for the purpose but am unable to understand how to connect it to Autodesk Inventor.
Revit :: Control Surface Pattern Line Weights Independently?
Sep 29, 2011how to control the surface pattern line weights independently?
View 2 Replies View RelatedAutoCAD Architecture :: Autodesk Doesn't Support 2008 Architecture
Sep 21, 2012I updated my computer to windows 7 32 bit and need the file: AdskHwCertificationDatabase.xml - version 17.1.0.4 so that I can find out the correct driver for my OS and my quadrofx 1700 graphics card. Autodesk doesn't support 2008 Architecture and the on;y file I can find is buried in a torrent file with a pirated copy of 2008 and I DO NOT wish to download that.
View 3 Replies View RelatedAutoDesk Smoke :: Run Flame Over VPN
Oct 27, 2013Is it possible to run Flame or Smoke over a VPN? I mean, is it possible to get a license over VPN?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
AutoDesk Smoke :: Takes All The Available RAM
Aug 5, 2012I tried Smoke 2013 PR2 on my MacBook Air 11".
It uses all the available RAM that is 4GB.
Same experience with Smoke 2012 on my MacBook pro 13"".
Is that normal?
AutoDesk Smoke :: EXR Look Different On Import
Nov 14, 2011I have RED footage which I exported as EXR. When I import them back in, they look exactly like the RED footage. But when I import the EXR in Fusion, export it back out, and then import that EXR into Smoke, it looks brighter, although I didn't change anything in Fusion. (when I compare the EXR from Smoke and the EXR from fusion in my finder on my desktop, they look exactly the same). So what is Smoke doing with the "foreign" exr on import?I was also playing with the LUT settings. I get a result which is close, but I need to be exact.
View 6 Replies View RelatedAutoDesk Smoke :: Where To Set Context
Jun 27, 2012Where do you set context in batch in the 2013 prerelease?
View 9 Replies View Related