AutoDesk Smoke :: Adjust Box Control?
Sep 14, 2011
Which option to set for any case on Adjust box.
There is a box below the Stablizer button. Pressing the Adjust Box for a while, it pops up with 3 options which are Adj off, Adj Axis, Adj offset. I've used "Adj off" all the time as default.
On the other side, there is one more Adjust box for Vertices. I don't get it either. I just used it set to "Adj Tangents" as any tutorial said.
I tried to understand it from user guide, but it is still unclear.
View 1 Replies
ADVERTISEMENT
Jun 19, 2012
I didnt see an auto adjust option in the gmask node, I can always use the hot key (classic smoke not FCP7 ha!) but I think its a nice feature to not have hidden.
Also having the context button in plain site not a right click would be nice too. Not a fan of the right click anything being a long time user of smoke and flame.
View 3 Replies
View Related
Nov 11, 2013
I'll be tweeking my gmask on frame 1. (Autokey is not select) then I move my gmask to frame 19, make an adjustment, and keframe from 1 to 19 is set. I just want to change the whole gmask? how to adjust the mask points globally? (something like the uber key in mocha) that way I can scrub thru my timeline, adjust my mask, and it changes the shape for the entire time, but does not add a keyframe?
also, I have my mask moving in. and points keyframes. I find that I need to move the animtion back 2 frames, how do you adjust the timing of keyframes in gmask?
View 3 Replies
View Related
Jul 13, 2011
Is it possible to change the settings of red files that exists in a sequence?
I've tried altering the red import settings of a sequence that contained the same clip cut up and a sequence that contained red files and non-red files, but the change seem to only work on the original clips.
View 2 Replies
View Related
Oct 2, 2012
Is there a plan to support control surfaces like the Tangent Wave or Elements ?
View 6 Replies
View Related
Jun 21, 2012
I have used smoke for a few years now, and one of the things that I find frustrating is the camera controls in action.Would it be possible to have a control hotkey set-up like maya/XSI/3DS? Some other softwares allow you to choose the keyboard set-up.
Using the maya set-up:
Alt - left mouse : tumble
Alt - middle mouse : track
Alt - right mouse : dolly
This means while looking though the lens you can move the camera in any orientation, you only need to hold down the alt key and use the 3 button mouse/Wacom to navigate.
View 1 Replies
View Related
Nov 29, 2012
When i scrub playback control in the cfx , it's slower compare to if i scrub the same thing (same viewport layout) inside the timing editor timeline. In timing editor the scrubbing response is a lot smoother even when we're looking at the same objects on the viewer. The playback control need to be fixed.
View 2 Replies
View Related
Nov 6, 2013
I know most of us have 2 computers in our suites and would be nice to controll both computer without having to use 2 mice and 2 keyboards. Right now I am using 2 computers, a mac pro and a macbook pro. I would like to use my MacPro's keyboard and mouse to control the macbook pro much like a mouse and keyboard on a second display. I've been using an application called teleport, but it doesn't allow me to use keyboard commands.
I've heard/used synergy, but it's to much work for the final product.
View 3 Replies
View Related
Nov 22, 2012
what i like in fcp, i can easily doing cut very fast, because the clip is not 'sticky'. So i can grab the clip and move and i got a very 'light' drag. The timeline is more 'slippery' ... i don't know how to say it. The drawback is : it's sometime become too sensitive so i can easily by accident move the cut and mess up the edit. I become paranoid , so i have to hold my breath while clicking :-) . But again the pros : it's easy to do fast edit or to crumble cuts around.
In the other hand .. what i like in smoke , this will rarely happen that i accidentally move the clip while i intend to click it. It's more 'sticky' to the timeline. So there's like more friction while try to drag the clip (only when first click/drag the clip not when the clip is already floating). The drawback is sometime i feel , it's hard to do some fast cut just by moving the clip around. :-) well, as usual, if we have 2 options, option A and option B, then we will tend to ask : do i have option C ( somewhat between A and B) ?
I'm asking is there any sensitivity control while i drag the clip. So it's between FCP and SMOKE. Something like a 'treshold' parameter.
View 4 Replies
View Related
Apr 21, 2011
I'm noticing with the new 2012 released, start up times are much slower. This seems to be caused by a 3 minute long control surfaces: intialising.The only control surface I'm using is a Intos tablet.Is there anyway to by-pass this?The .cfg didn't seem to have any control surfaces line.
View 2 Replies
View Related
Dec 4, 2012
In gmask, i switch the softness to 'tracer' so i got individual control of each the control points (cp). But seems that the feather's cp doesn't have its own tangent control. Is is hidden ? how can i turn it on ? or is it not available ?
View 1 Replies
View Related
Feb 2, 2013
I'm specifically looking into using motion vectors to control the position of a texture. For a better idea of what I mean. See this video, especially at 1:08
[URL]
I'm sure some people will call this the "Paperman" effect.
I see a lot of information out there on how to use motion vectors to do motion blur, but not much else. I'm sure they are capabable of soo much more! All that movement information from 3D in a 2D environment sounds great!
I have motion vector channels correctly exported from Maya and I'm wording which CFX combination I would use to composite a texture in a way that it was controlled by the movement information of the motion vector channel.
I know these 4 CFX can read motion vectors.
Motion Blur Node
Timewarp Node
Pixel Spread
Motion Analysis
But so far, no luck in achieving the desired effect.
View 3 Replies
View Related
Feb 21, 2012
I saw this cool shortcut for adjusting brush size and feather by holding control option and then dragging left right or up down to adjust the brush but in the video when he clicked and dragged to adjust the brush displayed red while being adjusted and I can't seem to get the red rubylith to display so I can't see the brush feathering when adjusted.
View 5 Replies
View Related
Mar 31, 2013
I need to turn several of my photographs into vector images for textile printing. Is it possible to somehow adjust or control the Image Tracer selection to other colors like 10-11 (or other), instead of either 6 or 16 ?
View 2 Replies
View Related
Aug 29, 2013
I know that the AJA Kona 3 card has 2 outputs. Can Smoke send one eye to one channel and the other eye to the other of the Kona 3 card? Dual Stream output is what I am really getting at.
View 4 Replies
View Related
Feb 26, 2013
Is there any way that Smoke can see/output sub-blacks and super whites? Can't find any way of seeing them on my scope, Smoke just clamps everything. It won't even see anything below zero in order for me to make a correction on it, everything seems to be clamped on import. I'm using ProRes HQ footage.
View 9 Replies
View Related
Jan 16, 2014
What is the best plugin to do spline warps in smoke?(need something like the distort in flame) I notice revisionfx don't make a warper for smoke on mac.
View 7 Replies
View Related
Oct 2, 2012
I am experimenting with Smoke 2013 pre-trial and I am having issues with importing images and video with alpha channels.
1. If I have a layered Photoshop file or png with an alpha channel (a still frame lower third), I see that I can import it as a multi layered clip, but what is the best way to have it in the sequence to show up properly?
2. If I have a QuickTime in animation format or Pro Res4444 format with an embedded alpha, how can I import that file to show and cut it on a top layer to animate above my video?
View 7 Replies
View Related
Oct 18, 2012
Can Smoke support the OFX architecture?
View 1 Replies
View Related
Jul 10, 2012
Does Smoke have selection functionality similar to that of Combustion? As an example, you might want to selectively blur part of an image. In Combustion, you would draw a selection and then apply an operator above the selection to achieve this. I don't see a similar selection tool function in Smoke, but I imagine you could achieve the same effect by duplicating a layer and using a Gmask via the Wipe timeline FX.does Smoke not have a selection tool similar to Combustion?
View 3 Replies
View Related
Jan 10, 2014
Whats the dealing with importing TWs to Smoke? I have a show that's 70% keyframed with timewarps and need a way other then baking the effect to bring it into Smoke. It's comming from FCP7 and we have Automatic Duck but neither the XMLs or AAF bring anything other then the first speed of the clip. Any way to retain the keyframes?
View 1 Replies
View Related
Jan 23, 2013
I have made a design on autodesk inventor along with gear and motors which give input to the mechanism. (Stewart Platform)
I am able to test the design by giving a random rotary input to a motor component which features availabe on Inventor.
However, I want to control that input somehow. I just want to enter the final coordinates the design needs to reach and the motors should be actuated automatically so as to reach those coordinates.
I have a MATLAB code for the purpose but am unable to understand how to connect it to Autodesk Inventor.
View 1 Replies
View Related
Oct 27, 2013
Is it possible to run Flame or Smoke over a VPN? I mean, is it possible to get a license over VPN?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
View 1 Replies
View Related
Aug 5, 2012
I tried Smoke 2013 PR2 on my MacBook Air 11".
It uses all the available RAM that is 4GB.
Same experience with Smoke 2012 on my MacBook pro 13"".
Is that normal?
View 2 Replies
View Related
Nov 14, 2011
I have RED footage which I exported as EXR. When I import them back in, they look exactly like the RED footage. But when I import the EXR in Fusion, export it back out, and then import that EXR into Smoke, it looks brighter, although I didn't change anything in Fusion. (when I compare the EXR from Smoke and the EXR from fusion in my finder on my desktop, they look exactly the same). So what is Smoke doing with the "foreign" exr on import?I was also playing with the LUT settings. I get a result which is close, but I need to be exact.
View 6 Replies
View Related
Jun 27, 2012
Where do you set context in batch in the 2013 prerelease?
View 9 Replies
View Related
Oct 29, 2012
When I export a XML from FCP 7 all of my files come over and link but there is no video with my HDV files (1440 x 1080) all of my other files (Canon FX etc) come over fine.
View 9 Replies
View Related
Jun 4, 2011
What is the best way to downconvert 5D HD to SD?
I converted the h.264 files to uncompressed 10bit. Bringing in the footage and XML was fine, but as soon as I resize to PAL (the timeline was changed to PAL, as was the output on the AJA) the picture starts anti aliasing in detail areas. I have processed this with every filter in Smoke with no satisfactory result.
View 5 Replies
View Related
Jul 7, 2013
I am having issues for a long time regarding importing XML into smoke 2013. Will try and explain you in breif.
First When we try an import XML into smoke it just doesnt do anything, in the message history box it comes up saying FOUND 0 SOURCES.
Nothing gets imported at all. No footage is imported, nothing is shown in timeline as well.
Second For a different project when the XML does get imported, the videos get imported but then again nothing is coming up in the timeline and in the message history box we get the following error.
XML Validation Failed.
Cannot process unliked media.
we have checked all the import options to make this work, including max up level and the rest but nothing is working.
View 6 Replies
View Related
Aug 16, 2013
I must have changed a setting because today my interactivity in CFX has taken a hit, specifically when making Axis moves. The move doesnt register until after I have made a change in the Axis field.
I know there is a setting for this but cannot remember. Am not having the same issue grabbing Axis in viewer.
View 2 Replies
View Related
Jun 7, 2012
I'm currently trying to conform an XML from FCP 7 into Smoke 2012 (Linux). The issue I have is that the files I want to conform with are MFX, however the files used in the FCP timeline are PRORES, therefore have a '.mov' extension. This means the Smoke is not seeing the MXF files due to the extension & the only way around it I have found, is to edit all of the '.mov' extensions to '.mxf' extensions in the actual XML. This works well, but is a complete nightmare, particularly as I'll have to do this for 13 half hour episodes!!!!
I have tried all the different combinations of Filename, Timecode, Tape, etc, but none work due to other metadata issues from the filming of the footage to it being delivered to our edit suites!!!!
Any way of making the Smoke ignore the file extension?
View 2 Replies
View Related
