I'm having a weird resolution problem with TRUE VIEW and AUTOCAD 2012.
I'm using Windows 7 ultimate 32 bits, i have a graphics card with 1900 x 1200 resolution.
As you can see below, the upper horizontal control pannel appears too big by comparaison with the workplace, and it's resolution is too poor.
The same thing happens with True view 2012.
Need to do a round upper left corner to join the horizontal flag with the vertical flag.
[URL]
When creating text in model space it appears both mirrored and rotated 90 degrees to the horizontal. However, when I create text in paper space it is fine. I have tried looking at the properties for the text but although I can find a place to rotate the text back to the horizontal it is still mirrored and therefore unreadable.
When I copy paste stuff from one document to another this also occurs.
When initiating the hatch command H at the command line my panel changed to the hatch panel. Now the command opens the more traditional hatch dialog. I don't how it happened, but just when i was getting used to the panel.
When editing a hatched area the panel appears. Why when I stretch some hatched geometry does not the adjacent hatch stretch with it?
I've created a new Panel in the cui....put some commands in it. It has a name and a display name.
i cant for the life of me find out how to make it (or any of the 100's of other panels) display
Right clicking the 'toolbar' area just gives me the usual options?
Architecture 2013 (if that matters)
nice of Autodesk to remove the Autocad classic then!
It would be a nice feature to have a control panel in Inventor where you could take certain driven constraints and put them on this control than hit a momentary button to make your model move. Once example would be a hydraulic cylinder. Presently, we drive the cylinder to put things into motion, but I have to access thru browser and usually add symbols to make the constraint stand out (See image). If I had a control panel where I could tie that driven constrain to it and depress a toggle/button which would activate the constrain. I would then have full control and almost act like it would in the real world.
View 5 Replies View RelatedWhat are the proper setting on windows xp control panel - printers & faxes - printing preferences, in order to be able to plot any size sheet in ACAD LT 2007? We are having to change the preferences in the windows control panel whenever we change from a d size sheet to an e size.
View 4 Replies View RelatedUser guide states: "Customize Brush Tip Shape options like Granularity, Spatter, Hardness, and Distortion controls. With a stylus, alter the spread of sprayed strokes by changing pen pressure."
I see the settings for controlling ganularity, distortion, spatter, etc., and the stylus tilt angle seems to control "distortion".
The cursor "spray" outline seems to change shape as when the stylus hovers over the tablet. But there appears to be less control when stylus contacts tablet.
I used traditional airbrushes for years. There are some interesting emulations here, but a better description
im starting up illustrator, and the control panel (at the top) is missing. I tried restoring the essentials layout, restarting the program, and restarting the computer to no avail. the screen resolution is at the highest setting, and the control window is checked.
View 1 Replies View RelatedI accidently did something here. I got this middle panel in illustrator and I can't get rid of it. It seems I can only click on tools or unclick tools but I can't get rid of the Glyphs, Flash Text, Stroke, Gradient, etc. I don't want this middle panel showing. It takes up too much screen space. How do I get rid of it?
View 4 Replies View RelatedThe selected image appears on the main/center panel but not in the preview screen. Printing results in a white sheet of paper with no image at all. The image has been updated to LR 4 - but made no difference.
View 13 Replies View RelatedThe control buttons are not visible on my Actions Panel making it impossible for me to record actions. how to make them visible?
View 1 Replies View RelatedWhen I view a file in CS5, the colors are vastly different than when I view the same file from any other program on my computer. I calibrate regularly and want to be viewing as per the calibration on CS5- are there setting I need to change in CS5 or are those accurate and I need to change the settings in my control panel?
View 3 Replies View RelatedI am using Adobe Illustrator CS6 Classroom in a Book which refers to 'Fill color in the Control panel' without explaining what exactly it is. Googling "Fill color" returned an image of a label 'fill' but my Illustrator CS6 has no such thing. Instead, it shows a couple of pull-downs when the Selection tool is selected. what Fill color is on this Control panel.
View 1 Replies View RelatedHow do I turn on and off the Baisc Control Panel ( color Temp, exposure, contrasts, shadow, Higlight, white, blacks, etc)? Somehow I have managed to turn it off, so it is not in the Right hand side panel under the Histogram. Insteasd the first Panel is TONE CURVE
How to turn the Basic Panel back on?
Thought the CC had info how to deactivate my PH Shop program, my computer only allows uninstall, change does not work to get it deactivated. Need the license off the Microsoft Windows computer and onto my new MAC.
View 1 Replies View RelatedIs it possible to show the overall size of several objects in the control panel? I can only do this by grouping them.
View 1 Replies View RelatedI'm trying to follow along with a video at Lynda.com on AI CS6.However, in the video, Deke McClelland is showing the TEXT "Align" on the top Control Panel.On my screen, it's not a text, but a small icon. When I click it, I don't get the same options he does.
I've searched and searched and can't find how to get MY screen to look like his. I have even tried to "Reset Essentials" (the workspace he's using) and still no luck.
Is there a way to change the default increment for the X and Y value boxes in the Transform area of the Control panel? When I have an object selected and want to move the object by clicking the arrows beside the X and Y boxes the object moves 1/8 inch for each click. Is there a way to set that to 1/16 inch for example?
A screen grab is attached showing the area on the Control panel in question. I've checked all the Preferences settings I can find but haven't found this one yet.
When I open Illustrator CS6 on my Mac/10.7, there are two toolbars locked up top, which is fine. I want to dock my illustrator window to those like I can in InDesign. How do I do that?
View 3 Replies View RelatedI created a line (stroke). I am following along with the Pluralist Brochrue creation video tutorial. I cannot click on the stroke weight options in the toolbar, I cannot select or make changes to the swatch panel options, even though the line is selected.
View 1 Replies View RelatedIs it possible to increase the size of the toolbar/control panel icons. I find my self craning at the screen whilst I'm getting familiar with AI cs6.
View 3 Replies View RelatedI need to clean up a picture of a worn out control panel. This will be printed on decal transfer paper for hobby modelers. The photo is entirely black and white. I just downloaded photoshop elements 12 (free trial). My question is what area of the editor is the best place to start with?
View 2 Replies View RelatedI get the message : the file does not have a program associated with it for performing this action.
Create an association in the default programs control panel
I went to default programs control panel an did not see where you change anything ?And what do you change it to ? Not sure what they are telling me to do ?
I am working on (yet another) minecraft character rig xD
So i have set up a facial control panel, using blend shapes and driven keys, but i need it to follow my character. If i parent it to the head, i doesn't follow when i grab the skeleton and move the character around, and if i bind it to the neck joint, i am not able to use the control panel, because the movement of the controls are locked, since they're binded to a joint.
[URL]
Every time I open a new drawing(without closing AutoCAD) my workspace resets ea time and I lose all toolbars and settings.
Using AutoCAD 2012
So you know what system I have, I use a laptop running Windows 7 64bit, with a dual core processor and 4GB RAM. It's a very capable machine and I don't usually have a problem using LR on it.
After installing LR 3.3 over 3.2 I experienced a problem whereby the PC would not recognise which program to use for opening the lrcat catalog files. Using the Default Programs option in Control Panel didn't work as Windows wouldn't accept Lightroom as the default program and kept suggesting I open the catalog using Adobe Reader instead.
I seem to remember having an issue with the 3.2 update as well but that was simply the icon for file type being missing (showing a default unknown file type icon).
Anyway, resolved the problem but had to resort to downloading a program called Default Programs Editor (http:[url]...... to correct the problem. Am thinking next upgrade, I will uninstall LR completely before installing the update, just to be sure.
If I have a site that I want to grade using two different configurations whats the proper hierarchy of everything? I am confused as to sites-grading groups-surfaces and how they mesh.
Concept A - Site with FFE of 471
Concept B - Site with FFE of 465
I'm trying to animate a moving rope based on simulation data. I know how to import my motion data for individual objects.I've seen lots of tutorials where one uses simulations or soft bodies with IK in order to create a rope. how to use all these features and I want the rope to follow my coordinates exactly. I was hoping I could do something like the following:
1. create points in Maya which correspond to my data points
2. connect the points with a curve
3. loft a circle using the curve as a path in order to make a rope
4. move the points. due to History, the rope position is updated
Is there a way to do something like this in Maya? I've tried, and it looks like ep points do not have key-able channel data, so I can't create animations for them separately. I'm using .mov data file imports to generate x, y, and z motion keys for the points.
The background of my workplace is flickering (the colour turns from black to grey to transparent etc.) Also if I for example scale a picture the picture turns into black. By clicking the picture it appears again.
Using CS6, version 13.0.1 x64 and Win8 64 bit. Everything updated and latest driver installed
I need to create a corridor that has this section. So I'm using this assembly:
on which I put 3 conditional fill subassemblies on point A, one for fill conditions of more than 2 m that would daylight at 2:1 until it reaches 2 m down and then daylights at 1:3 until it reaches the EG. Then I have another for fill conditions of less than 2 m that only daylights at 2:1 to the EG, and the last one is for all cut conditions.
As expected I have the following problem in some stations that have fill conditions on A of less than 2 m but more than 2 m on B:
Is there any way I can make B the comparison point without having the following problem on cut conditions?
Or that I could create an assembly with the condition that when I have a fill of more than 2 m on point B it daylights, from point B, at 1:3; but when B would be on cut conditions it daylights from A?