I have a 3d object and I am making my title block. I remember a few semesters ago being taught how to get your front, top, right and iso view from inserting the 3d object into the layout. I can't remember for the life of me how. The layout already has the object in it but it's only the main view.
I am using auto cad 2006.
I have a model with many items, each needs to be plotted from several views. One option is to create a layout per view, which means a lot of layouts to manage.
Is there another way? Where I can create a layout with several views so that plotting it will create multiple pages?
If it is possible to create a sectional view from my model and place that section in a new viewport without changing my other viewports. I have several viewports in my drawing but I need a certain detail section of the model but I do not want any of my viewports to get affected.
I can not have anything added to my model, since later on I will be using this drawing as a xref and I only want the main model to be carried over and not a section detail.
When I create a drawing in model space and then take off several views onthe new layout command, when I go to plot the layout in PDF all the viewsappear with a really thick line weight
I have tried selecting every part of the layout and changing the weight to 0mmas it was before but it doesn't make any difference...
My group and I are getting an infrequent but annoying problem with Model Documentation (MD) generated views in paperspace layout tabs. We all on autocad 2013, with sp1.1 installed on x64 machines.
We are seeing objects/ blocks showing in the MD views (viewbase created) in the layout that are no longer in model space. One common factor in this is that these objects seem to always be externally referenced (xref) files that have been either unloaded or completely detached (both cases purges preformed afterwards to wipe any remaining blocks made no difference). In this latest case the ghost objects show up twice (we needed 2 of the same xref) at what appears to be the correct old coordinates.
We have no work around for this and when this occurs we either have to revert to an older version from vault or create a new dwg, port all information over and recreate all views. The interesting thing about this problem is that if we revert to an older version from vault, the ghosts do not reappear/ reoccur at the same commands they appeared at previously.
I would like to create a sheet drawing that has two plan views or two profile views on the same layout?
View 2 Replies View RelatedI've drawn a 3D helix with a different base and top radii. Is there a way to generate the Right and Left side views without actually drawing them?
View 5 Replies View RelatedI have to represent a road section with limits of houses or any interference on field. All of thees interferences are poly lines, 3dpoly, lines, etc. Is it possible to have a little mark or something like this in a road section, it will work for me a lot for represent the houses in my sections.
View 1 Replies View RelatedCABINET FINAL.dwg
How do i plot a rendered object ? am using autocad 2010
attached is the object
If I can convert or extract a flat sheet layout from a 3D cylinder. I would like to provide a 3rd. party Laser Cutting shop with a flat layout to cut my cylinder walls from.
View 7 Replies View RelatedWhen I'm changing views (top,left,etc.), most of the time I have to press the shortcut followed by "Z" to show the object I'm working on, this is a pain and doesn't work well when I'm editing something because it will also zoom to whatever is selected, and not the entire object.
So, is there a easy way to change views without having to pan and zoom every time?
I am trying to create a second base view (using Layout/Create View/Base from model space). The problem is, I need it to be rotated from the original base view. However, when I rotate the part in model space, ALL of my views change.
So I guess my question is, how do I create multiple views of the same part that are seperate from the other base views?
how to do this programmatically and without modifying the handle of the object,i am trying to do it programmatically (entmod (cons 410 newname)(assoc 410 ... no luck.
(entmakex -ing will modify or create a new handle ctrl-X and then ctrl-V recreates a new handle too ...
Attach is the a showing 3 surfaces on a site . How do i embed a material on a surface on the layout page/mode.
In Object viewer it shows clearly the rock material on the surface.
i have views lets say 3 views on a sheet but in the list of views theres mores that appears maybe i inserted the extra views that are showing but i deleted them to put them on another sheet
the problem is they show up in the list of both sheet and i can't delete them from the list of the sheet that they were before
How can we obtain that the value of the Tag save as PDF in this case =
12045_Vermonden Frans_sta.096_PERSPECTIEF_19-02-2012
I define a vector via two points(ptStart and ptDirection).And now I want to get the angle between my vector3d and the X Axis.Here is my
Dim Ang As Double = ptStart.GetVectorTo(ptDirection).GetAngleTo(Vector3d.XAxis)
But the range is 0-PI.How can I change it to 0-2PI?
Is there a method to obtain the overall Site boundary? I have not found one, if there is, but it would sure come in handy when creating reports. We must always include the project Boundary as the first item in a report, so being able to add it to the existing reports would be a huge timesaver.
View 6 Replies View RelatedIs there any way to obtain the X and Y location of an iFeature that is placed on a center point? I cannot find a way to relate the iFeature to the point or vice versa with VBA. Holes are easy to relate but I am stuck on relating iFeatures.
My goal is to obtain the X and Y location of several iFeatures placed a piece of steel channel.
Inventor Professional 2014 64 Bit
Windows 7 Professional
NVIDIA Quadro FX 4600
Dual Intel Xeon E5540 CPUs
16GB DDR3 Ram
How can we obtain that the value of the Tag save as PDF in this case = 12045_Vermonden Frans_sta.096_PERSPECTIEF_19-02-2012
View 3 Replies View RelatedI create a polyline ,and then add it's objectId to a ObjectIdCollection defined by me.After the polyline is created,I would like to obtain it's second and sixth vertexes via this polyline's objectId.
View 6 Replies View Relatedhow to obtain the current layer state?
View 5 Replies View RelatedI'm trying to obtain a louvre iFeature for Inventor 2010. the ifeature on the c-bliss website no longer seems to be available... it redirects to zeevix.com or something.
View 1 Replies View RelatedWe would like to make the transparency of glass-materials visible in views and section-views by using the "realistic style". During a 3d-view our glass-material looks like transparent. Isn't it possible for REVIT to display the transparency of materials in views ?
The workaround to hide "glass" by using "overriding visibility" is not possible for us because some of our families and project families are using glass-materials inside (Showcases f.e.).
Software (German) :
RAC 2012+2013
Inventor Pro 2013
AcadM 2012
MaxDesign 2013
Sketchup 8 Pro
I need to define a mate constraint with a workplane as EntityOne and a midpoint from an Edge as EntityTwo.
API-Help tells me valid objects are planar faces, linear edges, vertices, cylindrical faces, conical faces, spherical faces, revolved faces, work planes, work axes, and work points.
The Edge object gives me StartVertex and StopVertex, but what about the midpoint?
I made a complex assembly from Solidworks few years ago. I imported it to Inventor 2012. How can I find the coordinate of the center point of the: a) parts/sub-assemblies, b) the complex assembly as a whole? Under Application Options, I have already checked: Sketch->Display->Coordinate system indicator. Under the assembly tree, I can go to the Origin of each sub-assembly/part and make the corresponding Center Point visible. However, I want the x,y,z values.
I copied and pasted a sub-assembly/part to a new assumbly file and then used VRMLout to export. When I imported the .wrl files to another application, the location of the parts/subassembies are not correct. I think they all became (0,0,0).
We want to obtain the center of mass of two or more subassemblies within an assembly. How to do it? The subassemblies may or may not be connected to each other directly.
View 9 Replies View RelatedHow to obtain the effective area of plot, plot in command?
View 9 Replies View RelatedWe have an engineer who uses AutoCAD LT 2014. He needs to use an electrical symbols library in AutoCAD so he can properly create the prints & drawings for machines, schematic edits, etc.
Looking for such a library/add-on for AutoCAD has been unsuccessfully. How to obtain electrical symbols for AutoCAD LT 2014?
Since the end of Aug. 2012 I've been making families for a manufacturer. I left Friday evening with good families. This morning I am finding all the families I checked with a problem.
When I move the cursor across the various views it doubles the views. Rolling the mouse wheel one click either way to zoom in or out cleans the view but on the next time the cursor goes across the view it doubles it again. Now there are 4 views overlapping each other. The next time it is possibly 8, and so on. It is difficult to count them because they are overlapping but it looks like they are doubling each time.
The software is Revit Architecture 2011 and the computer is a Dell Precision T3500.Are the families corrupted or is it the computer? Is there a toggle I hit that I shouldn't have?
2010 how can we obtain the block automatically insert the attributes as shown in red
View 0 Replies View Related