something strange happened , I had open two files (work file and file to watch from) and somehow after closing AutoCad , the content of the work file is replaced by the content of the other one.It is same with the .bak file . Is there any chance to recover my previous work , somehow to go back in the history of that file?
View 9 Replies
There is no 1/4 x 1 x1 Angle in content center. Can this be fixed?
View 2 Replies View RelatedI did a (I think) standard install of product suite premium 2013 a while back and am trying my first flexible hose run.
When I hit populate I get an error message saying something like "your request cannot be fulfilled because parts can"t be fetched from the content centre"
Now I see a whole lot of libraries are not available. My only other experience with this was when the mold libraries were not part of the installation and I had to do a huge download.
As far as the missing mold libraries went, I felt that was something the vendor should really have told us about. But let me not get ahead of myself this time, even though it's midnight and I can't do at least 1 run to show for tomorrow.
I am using IV 2010. I am missing the metric items for content center. I have checkeed the filter for DIN and nothing appears. It looks like the only thing I can view is ANSI. How do I get the rest of the content center loaded?
View 1 Replies View RelatedI am looking to reach the Autodesk Seek function from the ribbon menu, but cannot find the Content Panel on the Insert Tab. I did a little poking around in the .cuix, through the cui customization command, but cannot even find it. Is there a way to download this, or has the feature been removed for ACAD 2013?
View 6 Replies View RelatedI've recently upgraded to Win7 64bit. In Acad Architecture (trial versions 2010,2011 &2012)The content browser has nothing in it and the tool palettes aren't there.
View 2 Replies View RelatedIn looking for the design center in autocad 2011lt I discovered the content panel where it should be nested is missing in the insert tab on the ribbon
View 3 Replies View RelatedAs you can see, there is an entire face of the pipe missing. When I highlight over it (2nd picture) it thinks it is there. This has happened on lots of content center parts. There has been a few issues where this has happened with some of our downloaded user content (in our custom content center) even to the point of disappearing entirely.
This has happened across multiple (identical) machines. However, it doesn't seem to be reproducible on demand.
Pertinent info:
Inventor 2014 Pro, 64-Bit, Build 170, Update 1
Graphics - NVIDIA Quadro 2000 with latest current driver (Problem presented before driver update)
12GB RAM and Xeon Quad Core
how I can get the bolt type and sizes to show in the description of the item in a parts list when placed through Content Center! I would like the same with all fixings.
We have configured our own Content Center by copying standards and replacing the part number with our own reference number. This then shows the description as "Bolt" with no size etc.
Can Content Center be configured in a way to show sizes in description?
We facing the error shown in screenshot attached with this mail.
We are not able to read content centre.
I also check the path "C:ProgramDataAutodeskInventor 2013Content CenterLibraries" and found that its a empty.
We are using :
Software : Inventor 2012 Professional ultimate edition, MS-Office 2010 64 Bit.
Hardware : Workstation Dell Precision T3600
OS: Winxp (1 user )and win7(3 user)
the path to download these content centre files for inventor 2012.
When I attempt to place from Content Center some components, I receive the error message I attached:
"Unable to Update Content Part . Write permission is missing."
I receive this error not for all files.
I have just had to re-install my copy of X5 Ultimate as for some reason the files stopped working..
When I first started the software it told me there was a service update (previously installed on last install and worked fine) but when I clicked on update now it just closed the window without doing anything. I have downloaded the patch from Corel and that installed without problem.
But now, on looking in the 'do more' section there are only 3 items, Boris, Newblue Effects and Jamendo. (I have the first 2 as part of the ultimate edition anyway). The templates and other downloadable content are missing.
after loading vs x4 picture video music and title templates missing.
View 5 Replies View RelatedTransforming Objects updated 8/6/12 and it still doesn't mention that in photoshop cs6 one can specify the interpolation method used for the transform in the tool options bar:
[URL]
Where do I find the creative content file. I installed the X6 upgrade and it's not there or offered.
View 5 Replies View RelatedI have a business card file created in AI CS6. The file has two identically-sized art boards with crop marks. All the fonts are outlined, there are no linked graphics. I've opened the file in AI CC, made some minor changes, and tried to save as a PDF. When I open the PDF in either Acrobat Reader or Pro XI, there is no content, only the crop marks.
Interestingly, the desktop icon preview, and the open dialog box preview both show the content, and when I open the PDF in AI CC, the content is there. But when I open the file in either version of Acrobat, the content is gone. Just the crop marks show.
2011-10-26 The "Edit In" context menu that appears when I right-click an image in the Develop module has forgotten about my NIK and Topaz filters. Still in my C:Documents and SettingsOwnerApplication DataAdobeLightroomExternal Editor Presets directory are these files
Color Efex Pro 3.0 Complete.lrtemplateColor Efex Pro 4.lrtemplateDfine 2.0.lrtemplateSharpener Pro 3.0- (1) RAW Presharpener.lrtemplateSharpener Pro 3.0- (2) Output Sharpener.lrtemplateSilver Efex Pro 2.lrtemplateSilver Efex Pro.lrtemplateTopaz Fusion Express 2.lrtemplateViveza 2.lrtemplate but the "Edit In" menu does not present them to me. I must've changed something in Edit > Preferences or Edit > Catalog Settings, but I don't know what. how to restore these tools to the "Edit In" menu without having to reinstall them?
Just upgraded from X3 to X6. Still getting used to it, but so far so good.
On one layout, some items on a printable layer do not appear on the Print Preview. The page contains a monochrome bitmap, some text and a curve. Only the bitmap appears on the print preview, yet everything prints.
It doesn't happen with every job. Not a big deal on this job, but there will soon come a time when I need to know what will and will not print.
I use Illustrator CS6 on OS X 10.8. Yesterday I noticed that my PDFs come out as blank files with the text
This is an Adobe® Illustrator® File that was saved without PDF Content.To Place or open this file in other applications, it should be re-saved from Adobe Illustrator with the "Create PDF Compatible File" option turned on. This option is in the Illustrator Native Format Options dialog box, which appears when saving an Adobe Illustrator file using the Save As command.
which is actually a description that typically appears in AI files saved without PDF compatibility. It's not document-wise but rather application-wise issue because it happens even if I create a new Document, draw something in the middle of the canvas and save it. Also, all of my existing documents which used to save well before, do that now. Basically, I cannot save correctly a single PDF. But it seems that the exported documents must contain the data because they have different sizes based on the content.
There's no problem with saving in AI format.
I have imported an OAM file into the first page of an app I am making in InDesign. The OAM looks correct on load but once the animation begins it gets really big and all I see is a tiny portion of the animation.
I have other text and graphics on that page I was wondering if that could be the cause.
By default Content Center creates the sub-directories 2012, 2011, 2010 etc. to store the generated content center instance files. I have never changed this behavior. Why is it required to maintain these files in the existing separate directories? I don't intend to use a previous release of Inventor once upgraded.
I can see that there is a good possibility of generating the same content center instance in multiple directories ie: if you created a 1/2" nut in the 2011 directory and then there is a good chance of doing it again in the 2012 directory.
I would like to migrate all the files in those directories to my current release 2012 then place them in a common "generic" directory without separation into yearly subdirectories. Would this cause any serious issues?
I know I'll probably be resolving links for a while, but I can deal with that as long as Content Center still works after that. I would of course change the default location to my "generic" location.
I was looking to insert a steel shape into an assembly, and can't seem to find the Content Center Files? I am using IV2011, any tips on where to located these files?....VAR used all default install locations
View 5 Replies View RelatedWhen our tech was here to install Vault for us I had several pressing tasks going on and did not learn how to find and alter our content center files. I now have a little time over the Christmas break to work on this. Where do I look in the settings to see where the content center is located? I plan to copy the files to my machine as I will not have access to the server over the break and I will need to know where to reset the file search at. Is this done through the project folders? If so how do I accsee read/write? I do have admin rights and we are using 2012.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
A couple of years ago, there was a limit to the part file size that could be published to the content center. Using the new shrinkwrap capabilities and/or derived parts in Inventor we can produce rather large part files. Does the 2014 software have limits to the actual file size that can be published to the content center. 520K, 1M, 30M, 1G? We have some subassemblies that we would like to convert and publish to the content center but wanted to know how large we can make them.
Content Center is located on server with 3T+ of storage possible.
I'm doing an evacuation plan of an office building. The drawing itself is in the model space, obviously. The fire extinguishers and escape routes are added in layout.
The problem is that everything that I add in the layout ends up beneath the drawing in model space. I.e. the walls of the building are shown in front of the fire extinguishers which makes my evac.plan look like poop.AutoCad Architecture 2013.
inventor 2012 sp1- single user- lap top screen dies, so I loaded up all my file to external hard drive down load inventor to desktop for 30 day trial until my laptop gets fixed. laptop back up everything good moved files over except in one the assemlblies i had added some screws from the inventor catalog (place from content center menu. now I open the assembly drawing it is has unresolved files all the ones from that I loaded from the standard content center. I assueme it is looking for the files stored on the 30 day trial on the desktop but I can seem to find them to try and move them over.
View 3 Replies View Related[URL]
I have begun the creation of a new custom content center library because the old one was or became corrupted during our migration from from Inventor 2011 to 2013. The old custom library was un-recoverable. The creation of a custom content center library, adding components to the the custom library and working with the file tables adding columns for part description etc.. is rather easy. Refreshing legacy content center files has been rather difficult. In some cases I needed to delete the legacy files and them re-insert them manually. This process is rather time consuming. What I would like to do is to create all the files in the family table after I have made the changes to the family talble.
Every time when I upgrate Inventor to new version, my old assembly drawing will loss the content center file. So I have to replace the old version's content center file from the new version's content center file. How to automatically migrate it?
View 5 Replies View RelatedSomehow the Content Center Filter clears all content while in ISO or DIN. Both libraries are turned on in project.
I can see only one custom library when either filter engaged. I also see both ISO and DIN parts when filter is off.
[URL] ........
Since installing Buildinfg Design Suite Standard 13 my content explorer is showing a yelow error sign saying indexing error over content drawing icons. How do i fix this?
View 2 Replies View RelatedI'm having some problems giving certain parts in my assembly a unique file name. Im reorganizing all of my projects in a
- content center
- designs
- libraries
way, where my projects are under designs and commonly used parts under libraries.
Now i have something like a pump. I can derrive this assembly into a solid and put it in the content center, or keep the assembly and put it in the libaries folder. since this is a part i use in multiple projects.
Now my problem is that this pump has a different name in every project, and a library part doesn't allow me to change this name. Say standard name is "centrifugal pump" while the name in project 1 would be P101, while in project 2 it has to be named P501 and so on in order to match with the flowcharts.
Is my only option here creating a solid out of these components and putting it all in my content center ( leaving my libraries folder totally empty ), adding it as a custom part afterwards ( so i can rename it ). I rather have it in my library folder, since this will keep my design folder organized without hundreds of duplicates of this pump, using different names. Besides i rather have it as an assembly so i can assign the connecting tubes of the pump to different sub assemblies of piping.
Different example, a butterfly valve excists out of 3 parts. the valve itself, and 2 connecting tubes. possible to dissemble. all 3 parts need to have the same file naming say XV900. 1 side of the valve needs to be assigned to pipe-01 while the other side of the valve needs to be assigned to pipe-02. Content center doesn't allow me to split files, but allows me to use unique file names. A library party allows me to split files ( if not read only ) but doesn't allow me to change names.
