In order to plan the tiling layout, I've modeled a bathroom in 3d in Autocad 2012. Now I want to generate 2d views of each of the walls and floor. Is there an easy way to do it?
View 4 RepliesI am editing an old file set up by another firm that is used by our clients to keep track of room sizes etc, which has a room data table and room tags tied to area polylines. It has worked just fine on our 2013 Acad Architecture, but when I sent them (saved down to 2010) back to our client, using 2012 Acad Architecture, the tags disappear and the table is unpopulated.It seems like it must have something to do with the file originally being created way back when, along with some quirk between 2012 and 2013.
View 2 Replies View RelatedI know how to create a block and all that is fine, but looking for detailed simple lesson on how to create a Attribute. ( I guess thats what they are called). For instance, drawing a floor plan with different room names and etc, I know there is a way to make a circle or polygon, or square and then when it is inserted in the drawing, you just have to type the new name of the room, or the window symbol, or door number and etc.
By the way, I am using a student version of AutoCAD 2010. Also, if you could also add the keyboard shortcut alias's too would be a great deal.
make a LISP that will work with my room dimensioning? I'd like to be able to specify the width and depth of the room using a command similar to the "dist" command, and then click a point to place a text based on the distances gathered. I'd also like the text to be formated into architectural units and displayed like this: 12'-0" X 13'-5". Also, if possible, round the result to the nearest inch (to avoid 1/2" and 1/4" dimensions).
View 9 Replies View RelatedI am using Revit Architecture 2012 and I am trying to create a Room Tag. I have attached the file below. I want the tag to read the room name and the room dimensions. Then I would like an option to turn "Unfinished" on and off. I can get this to work as long as it is a type parameter. When I load it into the project it works well and everything is there. But if I change it to an instance parameter (which is what I want) then when I load it into the project the option to turn the "Unfinished" on and off has disappeared.
View 1 Replies View RelatedI have a project in wich rooms functionality is compromised. I don't know why the room tool doesn't recognise a simple room delimited by walls whose property divides rooms is set to yes. If I place a rectangle of rooms delimiters the room tool works properly instead. If I start a new project the tool works properly.
View 1 Replies View RelatedI have a large building project with multiple linked files (building split into blocks plus furniture etc models) with shared co-ordinates. All are working fine except one which happens to be a furniture and equipment model. When sections and/or elevations are placed in either the host or the linked file the views do not corrospond with the cut line of the section or view line of the elevation, for example if I place an elevation within a room the elevation looks as if it has been placed in a different position some metres away. When the files are linked within each other using the shared co-ordinates they place themselves in plan and elevation perfectly. I am trying to create room elevations to show furniture/equipment layouts and this is making it impossible!
View 3 Replies View RelatedI am trying to create a Schedule that figures out Light Power density for each room. The first issue is getting Lights to register what room they are located in. The next issue is getting the room area parameter to show up in the available fields. It is funny b/c Volume shows up but not the room area. How hard could that have to been to add that to the available list since volume is there.
View 1 Replies View RelatedI'm trying to create a new layout and then adding text and a view port. The add text works but the add view port method, written in AutoCad's Developer Guide, doesn't!
Sub MyLayouts(ByVal LayerVal As String) '*********************' '* Create Layout *' '*********************' 'Declaration' acDocs = Application.DocumentManager acDoc = acDocs.MdiActiveDocument acCurDb = acDoc.Database Dim acLayoutMgr As LayoutManager = LayoutManager.Current 'Notification' acDoc.Editor.WriteMessage(vbLf & [Default].MyApplication & " -> Création d'une présentation. ") 'Transaction database' Using acTrans =
[Code].......
I've created a table in a layout. I have the alignment set to middle center, but some cells in the table will show middle center then the data will be entered top right. I'm stumped as what to try next.
View 2 Replies View RelatedI need to be able to make layouts in external drawings, and therefore cannot use LayoutManager. I've got it working but it seems to me that my solution may not be the best or the "right" way to do it. I found out quickly that each layout needs it's own *Paper_Space# BlockTableRecord and I've resorted to creating one myself. In the code below, you can see that I name my new layout "*Paper_Space". It ends up getting named "*Paper_Space#" in the database, where the # gets incremented automatically. Is this the right way to do it?
[CommandMethod("test")]
public void Test()
{
[code]....
recently switched from 2007 to 2010. All of my dwgs in 2010 were created in 2007. When trying to create a pdf of any drawing from any layout...adobe has difficulty reading layer/plot style info...it prints everything gray. I've tried pretty much everything and now think it has to do with importing something (maybe plot style?) from my earlier version? I don't know... need getting my plot style to be read properly by adobe.
View 2 Replies View RelatedI have a model with many items, each needs to be plotted from several views. One option is to create a layout per view, which means a lot of layouts to manage.
Is there another way? Where I can create a layout with several views so that plotting it will create multiple pages?
i want to create a layout that just surrounds a given model windows, with a given scale. that is, not set to a specific paper size or with title blocks etc. Is there a way?
View 5 Replies View RelatedThere are two things in Autocad i can't figure out how to do effectively:
A) I want to create a copy of an existing layout, which i can do easily. However is there a way to make 30 copies without doing each one manually?
B) I have all my layouts set up the same way. Now i want to change all my 30 layouts in the page setup manager to print A4 instead of A3, and to print Landscape instead of Portrait.
Can these be done? Perhaps with some repeat scripts or something?
Has problem of layout limits such that he can't create more than 6 layouts, the 7th layout is automatically deleted. I know that we can create up to 255 layouts and sometimes more. Is there a variable settings that could have gone wrong inasmuch that the maximum layouts is now 6?
View 1 Replies View RelatedI want to creat a hollow cylinder. But I need to be able to unfold it to have a layout of the cylinder. So that when this DWG goes to the floor the technicans knows how much he/she will need from the sheet to roll the cylinder.
View 9 Replies View RelatedI'm trying to write an application that creates a .idw drawing from a .ipt file in vb.net.
Now I want to predefine a layout, where the projected views should gonna be, independent which .ipt file I have.
Do I create a new .idw and make it look like I want, then save it and open it within the application?
But if I change the savepath it ask me where the file (.ipt) is.
So now I could choose my one, right? But how can I choose my .ipt file in the application?
It won't let me do an operation like openwith or something like that.
Or does there exists another way to predefine a layout?
What is the difference between rooms and areas? Why create an area schedule off 'areas' as opposed to using 'room' areas? Can you create a schedule off room areas?
View 2 Replies View RelatedI want to create a profile layout by feature line. Is it possible?I have a pipe about 3 miles long, an alignment along the pipe, and a provie view showing the exisitng surface and pipe network. The pipe network was created from a feature line. I projected the feature line to the profile.
This is why I want to do this: I need to label the horizontal and vertical angle points of the pipe in plan view. I crated a style that shows the station and elevation. I want the elevation to reference the profile. But it only gives me the elevation of the surface and I need the top of pipe elevation.
I tried crate profile by layout and traced over the top of the pipe in profile but its 3 miles and it will take a long time. How to get what I want done faster?
I am looking to import an Inventor file and create views of it in AutoCAD 2013, However this is what appears under my Layout ribbon.
View 9 Replies View RelatedI am curious how the default workspace “3D Modeling” is able to combine ribbon panels from both the acad.cuix file and the modeldoc.cuix file in one tab. See attached screen shot to see where I highlighted the differences between the tab in the workspace and the tab in the acad.cuix file. I am trying to recreate this in my workspace without having two separate layout tabs.
View 2 Replies View RelatedIt appears when I create a pipe network by layout...
View 7 Replies View RelatedI'm trying to create a simple 2x4 ceiling grid hatch for layout planning, but AutoCAD keeps giving me an error when I try to use it.
Here's the custom hatch that I wrote at the very end of the acad.pat file:
*CGRID, 2x4 grid
0, 0,0, 0,48
90, 0,0, 0,24
When I load up ACAD, it shows the hatch in the selection, but after I've defined the area and I try to apply the hatch, I get this error in the command line:
Missing parameter on line 385.
I wanted to know why is it that everytime i create a layout as a pdf on a4 the dashed lines ( non printable area) size is different?
View 3 Replies View RelatedI want to create a simple scale bar in a paper space layout, that is dynamically linked to the scale of the viewport.
I've searched and come across a few dynamic scale bars on the web and a few forum discussions, but I just can't work out how to create my own from scratch...
Civil3D 2013 (infrastructure suite)
Self-built i7-3930K, 16Gb RAM, P9X79 m/board
SSD(system), HDD(data), GTX680, Win7Pro64
Lisp file that create a layout for each layer,I’m looking for a lisp file that creates layout for each layer instead of doing this manually.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am creating construction plans sets that require 3 road profiles for the left edge, center and right edge. I would like to dynamically link the center line profile with the edge profiles.
I have created alignment offsets to obtain the existing surface at the offset location. I would like the edge profiles to have a vertical offset from the center profile. Also if I modify the center profile I want it to dynamically adjust the edge profiles.
Having trouble with diameter and radial dimensions since upgrading to 2013.
For example, draw two concentric circles and Presspull (or Extrude and Subtract) so that you get a hollow cylinder. Then create a viewport of this solid in a layout, and try to dimension the inside and outside diameters.
One of the two dimensions will work properly (seems to vary which one). The other will magically "jump" when placed (ex. the OD dimension will jump and become the ID, or vice versa).
How to resolve this? Our guys are having to do absurd things like redrawing the circle in paper space and dimensioning to it with a scale factor. Is this some sort of 2013 bug, or a setting?
Inventor 2013
Windows 7 64 Bit
I would like to create a sheet drawing that has two plan views or two profile views on the same layout?
View 2 Replies View RelatedIs there a way to export multiple layout tabs to create individual CAD files at one time? I have a CAD file with 80 layout tabs. All the Drafting work was done on Paper Space of the Layout Tabs. Client wants 80 separate CAD files.
I tried right clicking on the layout tab but it will ONLY allow me to export one tab at a time.