AutoCad :: XREF Not Showing Up In Print Preview?
Oct 12, 2006
I'm using autocad map 2000. In model view I have inserted a map as an external reference. Then I have created a plot in paper view. Here the xref background is still visible. However, when i choose plot-->full preview I can't see the xref, only the other lines I've created. I'm using a HP designJet 500 in ISO A1 and have the following plot option selected:plot lineweights, plot with plot styles, plot paperspace last.
The drawing is pretty useless without the map
View 8 Replies
ADVERTISEMENT
Nov 13, 2013
When I attempt to view text with no fill and a hairline outline in the print preview nothing shows. Is their anyway around this?
View 2 Replies
View Related
Aug 13, 2012
I've been searching for this for over a week & finally thought I'd better go to the experts!
I have a 2 page document that has CMYK on one side and 100% Gayscale (with 2 Grayscaled bitmaps) on the other side. My problem is that when I go to print preview it shows the Grayscale as CMYK Separations. My printer is counting it as color instead of grayscale so we are being charged much more than the grayscale would be. I haven't changed anything in my color profile and actually deleted my ColorSettings.xml and rebooted Corel Draw to reset the color profile default. Still no change.
What I am used to (& what I need) is for the print preview to show my page 1 as CMYK separations and my page 2 as black like it used to. I do a lot of ads and need to be able to determine if there is any color in my document when there shouldn't be.
Problem number 2 is that around my grayscaled bitmaps when my document is printed there are thin black lines showing up where the edge of the photo is. None of which shows up in print preview.
I am using Corel Draw X5, Windows 7 - 64 Bit
View 14 Replies
View Related
May 14, 2013
Problem with a photo preview not showing when I size for a print. (e.g) All I get is a very,very small pinprick of a image? What do I do to get the correct preview window shown of image for the size I wish to print, and the photo is shown correct?
View 1 Replies
View Related
Feb 3, 2012
I'm having an issue with Autocad LT 2010 where when I xref in my title block which has our company logo in color, the logo will only print in black and white. If i open just the title block and print it, it will then print in color. I only seem to have this problem when the title block is xref'd in. I downloaded the 2012 demo version of AutoCadLT and it prints just fine?This has just started happening when my computer was upgraded to Windows 7 64 bit.
View 8 Replies
View Related
Jan 8, 2014
I received an Autocad file from another person, opened it with Autocad 2011 LT, and it looks fine. But when I go to print preview all the lines are very thick, making the detail of the drawing difficult to see. I've tried manually changing the lineweights but it has no effect on some of the layers. Is there an easier way to fix this other than recreating layers?
View 1 Replies
View Related
Mar 19, 2012
Im having trouble with an XREF. Its a site plan which has a lot of hatching so slows my drawing. When I modify the XREF file either by turning off/freezing hatch layers, or even deleting certain objects, the changes do not show in my drawings despite reloading the modified XREF when prompted by ACAD.
View 3 Replies
View Related
Jan 10, 2013
I have x'ref a dwg. file in my current drawing. And when i print preview with the correct ctb style... The x'ref lines are not showing up?
I am having troubles showing the green, cyan and yellow color. when i print preview it doesnt show nothing. The true color is on RGB.
View 4 Replies
View Related
Nov 2, 2012
Existing surface profiles not showing in xref. Constantly have to reload xref for profile to show. Even on opening drawing, reloading xref is required.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
View 2 Replies
View Related
Jun 26, 2012
I attach an xref to a drawing, plan profile, and align the parts of the xref in each viewport the way I want them to appear.
The host drawing is a generic plan profile sheet border. The viewports are set to the same scale same annotative scale, and are undefined, not a plan or profile viewport. I save the drawing and get out of cad all together. I restart cad and open the drawing. The plan view viewport is visible and the xrefs are also. In the profile viewport nothing is visible or only one line is visible. Items in the view port are viewable, not frozen in the viewport, not turned of. The annotative scale is exactly the same for all viewports as is the xref drawing.I am xrefing a civil 3d 2011 aliment and profile drawing into these sheets. The only way to see the xref in the view ports is to detach and reattach the xref. To make things worse this does not happen to all drawings that are using the border that I used to create this drawing set.
View 3 Replies
View Related
May 18, 2012
I am using Autocad LT 2013 and Autocad Architecture withing the same office. When I open a file that has an Xref from Autocad Architecture with 3D walls in Autocad LT, the walls only show as 1 line instead of 2. If I open the orginal file that the Xref came from, with Autocad LT the walls show up just fine (as blocks instead of 3d walls as I expected). I am hoping to be able to veiw the Xrefs correctly in Autocad LT.
View 7 Replies
View Related
Jun 12, 2013
I have a model space with a few XREF drawings. I have a layout with a viewport of these drawings. All seemed fine until I imported another drawing using XREF. I went to adjust this viewport and it is not showing the new drawing that has been imported into model space (I can see the three drawings that were there but the new one will not appear) to you have to like "reload" a viewport or something? (From my understanding viewports alwasys stay current with model space)
View 8 Replies
View Related
Dec 18, 2012
Currently the xref manager defaults to CLASSICXREF. I thought this was a CUI thing and changed the XREF Manager "Show" from "No" to "Yes". Still defaults to CLASSICXREF. Is there a system variable for this? Something?
View 3 Replies
View Related
Dec 11, 2013
I have a drawing done in AutoCAD Architecture 2013. Most of it is just lines, but I have a couple of Walls with Doors. It looks fine in the base drawing but when I xref into another file the walls revert to their original color and the doors have disappeared. The opening is there but no door.
I tried xredit and the doors are there but when I close that they are gone again. Tried detaching and reattaching...still have the problem.
After I posted this tried Display Configuration. Clicking all options for Doors gives me the doors...in a closed position, not the same as in the base plan.
View 1 Replies
View Related
Apr 11, 2013
Running 2013 SP 1, HF3.
So I made viewframes in my base file which I then xrefed my base file into my sheet file. In my sheet file, the viewframes are no where to be seen. The layer is on, set to plot, has an off color so I know I should see them.
Also if I data reference them in they again do NOT show up. But I can do a Zoom to and I end up at 0,0.
View 1 Replies
View Related
Feb 17, 2012
We have a drawing with an xRef in model space and it is exposed through a paperspace viewport.
While in PS, we activate the viewport so that we can then select the xRef and with that done, we right-click on the mouse and now we have the issue.
On all computers but one, we see the pop-up menu on the left of the attached pic, but on that one computer we see the menu on the right. The difference is marked off in red and as you can see, the section with the xRef options is missing for that one guy. Why?
We are all using the same enterprise customization file and each user has their own main customization file. I have checked his main customization file and don't see anything that would be causing this.
View 9 Replies
View Related
May 7, 2013
I've got a drawing that contains an XREF. I've got a field reading the viewport object's Custom scale>Use scale name. However, whenever the drawing is loaded up all of the XREF's scales get imported. Since they contain the same scales, the field changes to read the XREF scale instead of the one it was set to. They are the same scale, but the field reads the XREF one first. Here is a screenshot showing what I'm talking about. Notice that the viewport's properties never show the scale as 1:20_XREF, but the field does.
I've been having to click "show all scales", do a SCALELISTEDIT, remove the XREFs, then do a UPDATEFIELD. I have to do this every time the drawing is open. It stays that way until C3D is closed. This becomes a problem when I go to PUBLISH a sheet set. If I haven't opened all the sheets in the sheet set and changed the scale list then they all get the wrong scale list shown.
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
View 7 Replies
View Related
Jan 22, 2013
I have a drawing that I created with acad 2010 that has a pdf xref attached. I just updated to 2013. And now when I go to plot the drawing my xref shows up in preview but doesn't show up on the plot.
I can go back to my 2010 version, and it plots fine. What gives?
View 0 Replies
View Related
Jan 16, 2009
So I am working on this document and it has silver background. I go to print preview (Photoshop cs3 and cs4 on Vista) and I get color looking more like bronze looking but when I do print, it comes out just like it should (in working mode which is Monitor RGB with Proof colors checked).
This setting is the only one I've used to make sure image/psd looks exactly like what it should when printing. I tried the default Working CMYK with and without Proof colors but it's still showing me the bronze look instead of silver. I've looked on the net and no exact easy fix for this was found. I really really appreciate any help.
Another simple question is regarding size. I'm working on a document size of 17.5 x 8.7 inches and the actual Banners will be printed at size 175 x 87 inches (5 banners each at 35inch wide but combined into a big one). So essentially, I'm working at 10% the size of what the final print will be and my file size is 760mgs. You can only imagine how big the file would be if I work on the actual size.
View 4 Replies
View Related
Apr 12, 2012
I'm having a plotting issue with one of my drawings. It's not showing up on plot preview, or even when I print it.
Any other drawing I create under the same Page Setup print fine. The paper and viewport have been have been set up for a standard 8x11, and drawing appears in as normal in the viewport. The layers are ok with no attributes (i.e transparency) set as to affect the print output. The printer drivers are up to date, and really doesnt make sense as any drawings I create under the exact settings show up normally and print out with no problem. Really don't want to recreate the drawing from scratch.
View 2 Replies
View Related
Dec 18, 2012
When using the WBLOCK command, no thumbnail preview is being saved with the block for previewing in Windows Explorer. I have check the RASTERPREVIEW system variable is set to 1, but this makes no difference.
When saving files normally I do not have a problem.
View 9 Replies
View Related
Jan 20, 2012
I'm using autocad 2000 and I have a problem printing & plotting. The print, plot preview only shows a section of the drawing. What settings do I need to change for the entire drawing to print for the paper size I need.
View 3 Replies
View Related
Aug 23, 2012
why I get these unusual radial lines showing up in my plot preview. The drawing looks fine on the screen but when I go to plot I get hundreds of lines that converge to a point in my preview.
View 5 Replies
View Related
Apr 26, 2012
I believe I have done this successfully before so I'm not sure what the problem is. Here is the situation.
AutoCAD 2013 Windows XP I have a drawing (Drawing A) that contains a PDF (using PDF attach) with text over the of it. I then have this drawing Xref'd into another drawing (Drawing B) in model space. When I print this drawing (Drawing B). The text prints but the pdf does not.
View 2 Replies
View Related
Feb 26, 2013
This file will crash when I try to print or print preview.
[URL]
No problem printing other files.Btw, from Document Properties, it shows that there are two RGB fills, which I cannot find.
That's the reason why I go into Print Preview to look at the separations.
View 7 Replies
View Related
Aug 14, 2013
When I click on File>Open The dialog box no longer has a thumnail preview. Only a small grey box hovering on the right that says "Initial View" with a check box. I have attached a snapshot of my Autocad File> open dialog box so you can see what I'm getting on my end.
If I browse for files in windows explorer and change view option to thumbnail I can see the thumbnails just fine.
I've tried everything but I cannot get back my File> Open thumbnail preview.
In Tools> Options I have the thumbnail preview settings all set to save thumbnail preview image. Nothing has changed that I know if for the thumbnail preview to go away.
It's really slowing me down not being able to have thumbnail preview in the file> open dialog box.
View 9 Replies
View Related
Aug 6, 2012
I am xref'ing in a floor plan (provided by a client) & I need it to print at a lighter shade of grade. The information that I am adding will be on my own layers and will be darker.What I need is to change all of the various lineweights from the xref'd file to a single gray lineweight, but not change the linetypes. I have seen this done, but it was a long time ago, & it was with an older version of AutoCAD. For the life of me, I cannot recall how it was done. Any simple way to do this without phyiscally changing my original copy of the drawing.
View 3 Replies
View Related
Oct 13, 2011
I’ve attached a dwf as an xref and set up a viewport, however when i print the viewport contents show up on screen, and in the PDF, but if i print it to the physical printer, nothing comes out except the lines i drew in that drawing (i.e. the polylines as references for where my viewport is).
I’ve come across this before in an older version of AutoCAD but have forgotten how to solve it.
Also, is it possible to bind a DWF? its seems you can do it with other things but not this file type.
[URL]........
View 2 Replies
View Related
May 13, 2013
I currently have with my plotting. I've recently switched from using a color table plot style to named/layer plot style.
Drawing "TANK.dwg" contains 2d geometry inside a block named "2d-tank" and is on layer '0' in the block, and that block is on layer '0' inside "TANK.dwg"
TANK.dwg is xref'd into "PHASE 1.dwg" several times in several locations. "TANK.dwg" is on layer '0' in "PHASE 1.dwg"
"PHASE 1.dwg" is xref'd into "COMPOSITE.dwg" on layer 'P1'
In "COMPOSITE.dwg" I can change the layer color of layer "P1" and the block "2d-tank" changes color to suit. It derives it's display color based upon layer P1, as everything has been on layer '0' up until now. However, despite picking up the appropriate color, it does not inherit the appropriate plot style. I try to apply a screened/shaded plot style to it and it instead inherits the plot style of layer '0' in "COMPOSITE.dwg"
This is a problem for me as I have 3 phases, and I need to be able to plot them differently, depending on each phase shown. I'd rather see if there is a way to make my current model setup work before I go duplicating thing and restructuring all my drawings to suit a layer style inconsistently, but I need this to print right.
I don't understand why an object would inherit the color of the layer it's on, but not another layer property, specifically its plot style.
View 6 Replies
View Related
Oct 24, 2012
I am having an issue with plotting a drawing that includes an xref. I have also included an attachment as reference.
I am working in AutoCAD 2010; I have a drawing that includes another drawing as an xref. The xref is on layer “0” in model space and my titleblock, annotation and viewports are in paper space (layout tab). I am using color dependent plot styles (.STB). The xref is a 3D model created with basic AutoCAD solids representing steel shapes, there are also some line segments representing the steel centerlines. The viewport is a plan view of the 3D steel model, the view is not clipped. Since the xref contains 3D objects when I print the drawing I don't want the “hidden” lines to show up, I accomplish this by setting the viewport shade plot setting to “HIDDEN”.
Here is the problem:
When I print the drawing the xref’s layers do not print correctly but rather take on the properties of layer “0” which has a plot style of “NORMAL” so everything prints in color and with a default lineweight. I want the xref to print using the xref’s layer properties that are defined in the .STB file. One variable that changes the outcome of the printed drawing is the viewport shade plot setting.
If the viewport shade plot is set to HIDDEN the xref prints using layer “0” properties (undesired) and the3D object lines are hidden (desired). See attached Viewport #1
If the viewport shade plot is set to AS DISPLAYED the xref prints using the xref’s layer properties (desired) but the 3D object lines are not hidden (undesired). See attached Viewport #2
The ONLY difference between the two viewports is the shade plot setting, there are no layer overrides and only the xref objects are affected, the objects in paper space print as expected. This only happens with an xref or block. If I bind the xref into the drawing and explode it so the objects are “live” in the drawing everything works fine. Unfortunately I need it to work correctly with an xref.
If I use a color dependent plot style (.CTB) where the .CTB file controls the color and lineweight I am able to achieve the desired results, unfortuneatly my company is determined to use .STB files
View 4 Replies
View Related
Jan 10, 2014
When I try to plot the file from the layout the middle and right part of my xref'ed image comes out as a black box - the top, bottom and left edge are fine. As are the line-drawings from two other xref on top of the image. The problem accourse both when I try to a physical copy on our plotter and when I try to plot to a pdf.
I'm working in autoCAD 2013 for mac and the files I'm working on are located on a server.
View 4 Replies
View Related
