AutoCad :: Resize Blocks To Any Dimension
Jun 30, 2011
After using AutoCAD daily for over a month, I got some questions again...
1) Resize blocks to any dimension. (from 600x750 to 620x810, not just scaling it), I'm told dynamic blocks can do this, but I can't locate a good tutorial for it... or is there an alternative method?
2) Can I have an additional toolbar or sidebar where I can place my most commonly used blocks? So I can just drag and drop them instead of using INSERT all the time.
3) Can we "lock" certain blocks so they can't be copied or moved? Or even better, lock a layer so noone can edit it or copy anything from it?
I was thinking of blocking the entire layer and unchecking "Allow Explode" , people can still copy the blocks, but it will just be a huge mess.?
View 9 Replies
ADVERTISEMENT
Oct 28, 2012
I am downloaded some blocks from Internet but can't use them. Cause they are unfit for my figure. Some are Bigger then from my requirment and some are smaller.
View 8 Replies
View Related
Sep 9, 2013
I am drawing ordinate dimensions in blocks and then I am getting the geometric extents of these blocks, if the block contains the dimension, the extents are much larger than expected. What may be the cause?
See the attached drawing, the lines are connecting geometric extents MinPoint and MaxPoint. For the blocks that don't have dimension in them, the extents are correct.
View 4 Replies
View Related
Jul 20, 2011
Is it possible to constrain a dimension to an entity?
Outside the block editor you can display a constrained dimension with a dimension style but it doesn't appear as you can do the same inside blocks.
I want show the dimension of a line in a block that is constrained by a dimensional constraint but I can't figure out how to constrain the dimension extents to anything.
I could put in an attribute but it doesn't look like you can constrain attributes either. And then I would need to work out how to pass the value into it.
View 2 Replies
View Related
Apr 6, 2011
I have an image that is 5363x3575 and I need to resize it to 960x381.
Is there any way that I can resizing without croping or distorting it?
View 2 Replies
View Related
Jul 28, 2011
I try create simple block where I change dimensions of polylines. Everything work with stretch partameter until I try use search parameter for change dimension.
View 4 Replies
View Related
Dec 5, 2013
I have a line with shapes on each end like an aligned dimension. I want to have a grip on each end to let the user put the ends where they want.
I tried a polar stretch pair, with two rotation pairs, but am lost. The stretch is easy, but does not rotate the arrows to stay aligned to the line. I don't actually have arrows, but most know the behavior of aligned dimensions. I don't have extension lines though, like the dim would so ignore that part.
View 5 Replies
View Related
Sep 5, 2013
I have a block of a guide sign with directions and azimuth angles. I made arrows rotatable and angles were changing ok. But when I try to rotate an arrow into zero position, dimension shows 180. I need the dimension to show 0 degree. How can I do it?
And I can’t make angular dimension show degrees greater than 180 even if I specify vertex – after rotation angle shifts on the other side. I gave up and used back azimuth.
And I can't make an attachment: "The contents of the attachment doesn't match its file type"?
View 2 Replies
View Related
Sep 13, 2011
I am having some trouble adjusting the dimension scale to match blocks and objects in my drawings.
View 1 Replies
View Related
Nov 5, 2012
I have a client who has a set of .ai files they need resized to meet various epub layout specs. Apple and Kindle both are different sizes so I need to know the best way to resize an .ai file 11.25 x 5.65 inches into a smaller dimension in pixels while retaining the layers.
View 9 Replies
View Related
Jan 4, 2014
I have a drawing with dimensions. Now, I want create Dynamic Block Controlling Visibility with dimensions in drawing with name dimension.
LT-don-TD LT-Kdoc-TD LT-Kngang-TDLT-don-thay LT-Kdoc-thay LT-Kngang-thayLT-don-moi LT-Kdoc-moi LT-Kngang-moiH-don-TD H-Kdoc-TD H-Kngang-TDH-don-thay H-Kdoc-thay H-Kngang-thayH-don-moi H-Kdoc-moi H-Kngang-moi
Then, I use command DAL; I can select dimension want use.
View 8 Replies
View Related
Jun 2, 2011
I'm trying to get the dimension text that I pull out to the side closer to the actual dimension marks. The 2 1/2" and 2" shown have a minimum distance they can get toward their dimensions. I would like it to be about half of what it is, but so far I haven't been able to find the property that changes that.
View 3 Replies
View Related
May 28, 2013
I have one problem in ilogic "How to convert the normal dimension to driven dimension through ilogic"
View 4 Replies
View Related
Feb 10, 2012
Is it possible to override a dimension with some sort of formula or function that relates to the length of the dimension?
A simple linear scaling might be possible by inventing a new unit with the appropriate conversion ratio, but that wouldn't work. What I need for the dimension to display a length 400 less than the actual length.
View 9 Replies
View Related
Dec 4, 2013
How can I avoid getting zeros when creating dimension line with quick dimension command. the Zeros indicates the line itself. how it can be avoided?
View 5 Replies
View Related
Feb 23, 2013
how to make a radius dimension a diameter dimension? I have Inventor Profession 2013.
View 1 Replies
View Related
Jun 27, 2011
Is there a way to override a dimension and have it shown as a GD&T Basic dimension. I can override a dimension with the text option but not with a box around the letter. It sounds strange to do this but the letter represents a dimension in a chart format that are Basic dimensions.
View 9 Replies
View Related
Jun 23, 2011
I want to insert dimension lines on this project. But instead of having an actual dimension I'd like it just to be a letter that refers back to a chart of possible dimensions for that element. How do I do this? I'm using AutoCad Architecture 2012.
View 1 Replies
View Related
Feb 21, 2013
Can i change the length of the dimension line 'extension' when my dimension text placement is beside the dimension line (see attached image)?dim line length.jpg
View 6 Replies
View Related
Jan 27, 2012
Is there a way to make the linear dimension a diameter dimension?
View 9 Replies
View Related
Dec 29, 2010
every one now a day i am making isometric drawings so i m little bit confuse in that i am using dimension and change the oblige angle text of dimension so is it right way or not ????
View 9 Replies
View Related
Jul 29, 2011
When doing an angle dimension and trying to put text under the dimension line, the text types out straight which if long enough will extend over the dimension line. Other then creating text with arctext, is there no other way to get it curved? I am using AutoCAD 2010.
View 3 Replies
View Related
Mar 24, 2013
I have just been trying to resize some images on the latest version - 3.510.4297.28964 - and I have typed the measurements that I wanted into the print size fields on the resize dialogue. The actual sizes the program resizes the images to differ though - some look to be about right, whereas some come out much larger, but they all show the dimensions that I inserted in the canvas size box.
I'm sure I've done this before and this hasn't happened?
View 1 Replies
View Related
Dec 18, 2008
It has come to my attention that the new drag-resize feature only changes the master diameter of the brush but leaves the dual-brush diameter intact. It is the only shortcut that does this resizing improperly.
I would like to know if everyone else experiences the same problem. Is it a bug or is this way of resizing intended?
I mainly do digital paintings and this small bug makes the feature useless for me. I hope that it will be fixed at least in cs5.
View 5 Replies
View Related
Apr 25, 2008
my normal dimension style has text above dmension line & I want to add 'typical' to it below dimension line.
I have done this lot of time in my previous job an year back. but I can't seem to remember what to type between dimension text & the word I want to add in edit text box, so that it appers below dimension line.
View 7 Replies
View Related
Oct 11, 2011
I'm inserting dimensions and the tics keep coming out huge and not on the dimension line, in fact there's one on either side 20 ft out. If I change the drawing scale in the tab at a the bottom the tics get smaller and closer in, but they are still off the dimension string by a long shot.
View 3 Replies
View Related
Jun 11, 2012
In previous versions I have been able to resize the canvas and then resize the image. For example resize the canvas to 250px x 250 px. Then resize the image to the same.
Here is the process I am using:
Duplicate the layer and then hide it. Resize the canvas (Image > Canvas Size) to 250px x 250 px. Un-hide the layer and then resize the image (Image > Image Size). When I go into Image>Image Size it says that the image is already 250px x 250px. However if I try to transform the scale the image is the original size and not 250px x 250px
The reason for needing this is I resize image size (in bulk) and the canvas size using the batch process (file>automate>batch) and actions. I loaded the actions file I used in previous versions, but that did not work correctly. I then went in to do this manually and got the same results.
View 1 Replies
View Related
Feb 28, 2011
(defun CELBLKS ( / e blk ss blkl)
(setq blkl "" ss (ssadd))
(while (setq e (entsel "
[Code]....
i have this lsp, it works great but how can modify it if i want select with a window.? exemple: if i have 3 differentes blocks, i want to select them with windows and the lisp select all blocks that are identical of those 3.?
View 9 Replies
View Related
Aug 22, 2013
We have a new title block which now contains various fields to automatically populate the drawing number, number of sheets, issue etc. The problem we have is when we go to zoom all or extents on a layout tab it moves the layout to the right each time. If we only have one layout or we use a plain title block i.e. with no fields, the zoom works fine (layout stays put in the center). This is also true if we directly insert a field onto the layout - again no problems.
The cause of the problem only happens when a block containing a field is inserted onto the paper space of a layout and,there are multiple layouts containing blocks with fields.
View 6 Replies
View Related
Aug 8, 2013
How to find no of times specific blocks used in a drawing?
View 9 Replies
View Related
Jul 15, 2011
How do I manipulate a height parameter all of the dynamic blocks in the drawing from one single field? Say a field located in the drawing properties or on the drawing itself.
For example: Multiple blocks of different walls of same height with other blocks of things on located on those walls, dependant on the wall height, all linked to and changed by a single field. Possibly a Wall Height field located in the custom tab of the drawing properties.
I can pickout each of the blocks and change them at the same time in properites menu because they all share the same parameter name. I would just like to have that height parameter of every block in the drawing, that has that specific parameter controled by a single field. Which I could enter a new height at anytime that would change every block in the drawing to that height.
View 1 Replies
View Related