AutoCad 2D :: How To Resize Blocks
Oct 28, 2012I am downloaded some blocks from Internet but can't use them. Cause they are unfit for my figure. Some are Bigger then from my requirment and some are smaller.
View 8 Replies
ADVERTISEMENT
AutoCad :: Resize Blocks To Any Dimension
Jun 30, 2011After using AutoCAD daily for over a month, I got some questions again...
1) Resize blocks to any dimension. (from 600x750 to 620x810, not just scaling it), I'm told dynamic blocks can do this, but I can't locate a good tutorial for it... or is there an alternative method?
2) Can I have an additional toolbar or sidebar where I can place my most commonly used blocks? So I can just drag and drop them instead of using INSERT all the time.
3) Can we "lock" certain blocks so they can't be copied or moved? Or even better, lock a layer so noone can edit it or copy anything from it?
I was thinking of blocking the entire layer and unchecking "Allow Explode" , people can still copy the blocks, but it will just be a huge mess.?
Paint.NET :: Resize Images And Print Size Fields On Resize Dialogue
Mar 24, 2013I have just been trying to resize some images on the latest version - 3.510.4297.28964 - and I have typed the measurements that I wanted into the print size fields on the resize dialogue. The actual sizes the program resizes the images to differ though - some look to be about right, whereas some come out much larger, but they all show the dimensions that I inserted in the canvas size box.
I'm sure I've done this before and this hasn't happened?
Photoshop :: Drag Resize Doesn't Resize Dual Brushes
Dec 18, 2008It has come to my attention that the new drag-resize feature only changes the master diameter of the brush but leaves the dual-brush diameter intact. It is the only shortcut that does this resizing improperly.
I would like to know if everyone else experiences the same problem. Is it a bug or is this way of resizing intended?
I mainly do digital paintings and this small bug makes the feature useless for me. I hope that it will be fixed at least in cs5.
Photoshop :: Image Resize After Canvas Resize In CS6
Jun 11, 2012In previous versions I have been able to resize the canvas and then resize the image. For example resize the canvas to 250px x 250 px. Then resize the image to the same.
Here is the process I am using:
Duplicate the layer and then hide it. Resize the canvas (Image > Canvas Size) to 250px x 250 px. Un-hide the layer and then resize the image (Image > Image Size). When I go into Image>Image Size it says that the image is already 250px x 250px. However if I try to transform the scale the image is the original size and not 250px x 250px
The reason for needing this is I resize image size (in bulk) and the canvas size using the batch process (file>automate>batch) and actions. I loaded the actions file I used in previous versions, but that did not work correctly. I then went in to do this manually and got the same results.
AutoCAD Visual LISP / AutoLISP :: Select All Blocks Like Selected Blocks With Window?
Feb 28, 2011(defun CELBLKS ( / e blk ss blkl)
(setq blkl "" ss (ssadd))
(while (setq e (entsel "
[Code]....
i have this lsp, it works great but how can modify it if i want select with a window.? exemple: if i have 3 differentes blocks, i want to select them with windows and the lisp select all blocks that are identical of those 3.?
AutoCAD Dynamic Blocks :: Zoom All & Extents With Blocks Containing Fields On Layout Tabs
Aug 22, 2013We have a new title block which now contains various fields to automatically populate the drawing number, number of sheets, issue etc. The problem we have is when we go to zoom all or extents on a layout tab it moves the layout to the right each time. If we only have one layout or we use a plain title block i.e. with no fields, the zoom works fine (layout stays put in the center). This is also true if we directly insert a field onto the layout - again no problems.
The cause of the problem only happens when a block containing a field is inserted onto the paper space of a layout and,there are multiple layouts containing blocks with fields.
AutoCAD Dynamic Blocks :: Finding Number Of Times Specific Blocks Used In A Drawing?
Aug 8, 2013How to find no of times specific blocks used in a drawing?
View 9 Replies View RelatedAutoCAD Dynamic Blocks :: Stretching Same Parameter In All Blocks In Drawing From One Field?
Jul 15, 2011How do I manipulate a height parameter all of the dynamic blocks in the drawing from one single field? Say a field located in the drawing properties or on the drawing itself.
For example: Multiple blocks of different walls of same height with other blocks of things on located on those walls, dependant on the wall height, all linked to and changed by a single field. Possibly a Wall Height field located in the custom tab of the drawing properties.
I can pickout each of the blocks and change them at the same time in properites menu because they all share the same parameter name. I would just like to have that height parameter of every block in the drawing, that has that specific parameter controled by a single field. Which I could enter a new height at anytime that would change every block in the drawing to that height.
AutoCad 2D :: Replace Dynamic Blocks With Normal Blocks Based On Parameters
Aug 2, 2012We used a bespoke program to convert our drawings to Java applets for web usage. This does not cope with dynamic blocks at present and we have started to receive drawings from our clients using them.
I need to replace this with standard static blocks based on one of two criteria. Either:
1) Replace based on visibility state (have generic chair block with multiple different chair types set by visibility type, need to replace depending on which type it is set as)
2) Replace based on parameter (have table with size set by dimensions, need to replace with static block for each dimension)
AutoCAD Dynamic Blocks :: Add Exact Same Objects And Visibility State To Blocks
Jan 7, 2014I have over 100 blocks that I need to add the exact same objects and visibility state to. Is there a way to globally make this change, or even to copy the visibility states from one block to the next without having to recreate the states in each block? I thought I had previously run across a routine on here that would make changes to multiple blocks at once, but I can't seem to find it now.
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Convert The Blocks In Dwg File To Lines That Are Centered On Those Blocks?
Jan 24, 2012I have a project in 3D that I would like to export to Stadd. This requires lines rather than blocks. Is is possible to convert the blocks in the attached dwg file to to lines that are centered on those blocks?
View 9 Replies View RelatedAutoCAD Dynamic Blocks :: AttSync Of Blocks - Takes A Long Time With Numerous Objects
May 18, 2012The AttSync command does what it advertises fairly well. My problem is that I have thousands of small blocks in a single drawing. (My current drawing has 2100 block references with four attributes in each one.) I may change the attribute values in a few of them and need to re-sync the attribute locations. When I run AttSync it updates every single block insertion. One of two things are desired:
1)Flag each block insertion as having been sync'ed, reducing the number of objects requiring synchronization when AttSync is called again. Provide a way to force all to be sync'ed.
2)Allow a selection set in the AttSync command after selecting the block to sync.
Either or both of these would a great time-saver for those of us with large numbers of blocks with attributes.
AutoCAD Dynamic Blocks :: Exploding Blocks With Negative Values?
Apr 24, 2013I built a building foundation for a grading plan and I have another building that is the exact mirror of it. I have tried to mirror it. Didn't work. I created a block of the feature lines and inserted it with a -1 x value but I can't explode it. I tried the regular explode and xplode. Neither worked. I can use the the block to draw feature lines over but it just seems so much easier if I could figure out how to explode the block.
C3D 2013
AutoCAD Dynamic Blocks :: Delete Last Attribute In All Of Specific Blocks
Jan 24, 2012I have the same block repeated multiple times in a drawing, and I want to delete the last attribute in all of the specific blocks. When I edit the block in block editor, the attributes do not show up. After I explode the block, there is no text. The attached image shows the properties of the block.
View 9 Replies View RelatedAutoCAD Dynamic Blocks :: How To Get Blocks To Have Images Associated With Actual Block Name
Apr 29, 2013I am using AutoCAD 2013 on Windows 7 platform
95% of the blocks on the palettes have the images associated, and named, per the block name.
I have 48 blocks that the images are named like this "Block tool_F2149212-4649-41F5-95E6-4A978EC376F5_2".
I have tried resaving the blocks and recreating the blocks to no avail.
How to get these few blocks to have images that are associated with the actual block name and not the generic "block_too" name?
AutoCAD LT :: Fields Within Blocks / Update Blocks For A Client
Dec 4, 2013I am trying to update blocks for a client. Each block has a line of text with the block name in it. I would like to automate these with a field so that if the block name changes or a new block is created from that one, then the field would update as well. I am running AutoCAD LT 2012 currently.
View 8 Replies View RelatedAutoCAD Dynamic Blocks :: Sharing Parameters Between Blocks
Nov 20, 2013I wish to have a single dimension alter the dimensions in a set of nested blocks, similar to shared parameters in Revit. For example, I have a circle that has a fixed diameter that I wish to control in all blocks. I have set the diameter to barDia so now I wish to manipulate the dimension from outside the block.
Am I able to share the parameter across all the blocks?
AutoCAD Dynamic Blocks :: Replace Standard Blocks
Jun 20, 2012I was trying to alter the standard blocks on the tool palette. How I messed everything up but I basically have two huge problems now.
1. I am missing the necessary default blocks that should be under my edit block directory.....all the Aecb files.
2. Now when I try and put in a receptacle or any other standard block a triangle with an exclamation point shows up upon insertion.
I attached a picture of the "edit block definition" and the troubled symbols.
AutoCAD 2013 :: Unnamed Blocks Inside Blocks
Feb 19, 2013I received a file that has a large number of blocks with unnamed blocks inside. I need them all to be by layer, and i really don't want to explode it.
How can I can do it?
AutoCAD Dynamic Blocks :: Text Disappeared From Blocks
Oct 1, 2011I have been working on a drawing with 3 different dynamic blocks for several weeks and everything has been working perfectly. However, all of a sudden this afternoon, the text in all 3 dynamic blocks disappeared and will not display on the screen in paper or model space, and does not print.
As best I recall, I was creating a polyline viewport when this text disappeared.
I cannot turn the text on in these dynamic blocks. The text in on layer 0 which is on, and is unlocked and unfrozen. Additionally I have turned on, unlocked and unfroze all layers in the dwg and this does not work. I have also checked the text layer in the block editor and it is on layer 0.
When I click on any of the blocks, all the information appears to be correct, ie: door numbers, text style, etc. The text, however, just does not appear. Also I have never set any invisible text parameters and when I open the block editor, nothing in the invisible text area is selected or select-able.
Previous versions of this drawing, which I saved yesterday, display all block text perfectly. Perhaps there is a setting I accidentally hit which caused this problem?
I have tried repeatedly turning on all the layers, unfreezing, unlocking, changing parameters in the Style menu. I closed Autocad and turned the computer completely off and back on again.
AutoCad :: Separate Same Type Of Blocks In Dynamic Blocks?
Dec 12, 2013how can i separate same type of blocks in dynamic blocks? all layers are same..
View 9 Replies View RelatedAutoCAD .NET :: Plots All Blocks To PNG - Open DWG / Get List Of All Blocks
Nov 30, 2012I have a program that plots all blocks to png - open a dwg, get a list of all blocks, insert each into an empty dwg, zoom extents, and plot using the OOTB PublishToWeb PNG.pc3. In the attachments is an example of the problem. When I do this manually from a layout, I get the correct image. When I plot from code using the same PC3 file, draworder is being ignored.
It works if I apply transparency to the block and use ps.PlotTransparency = True, but I would prefer not to have to tell the user to change the block definitions. Is there a plotsettings property I am missing?
AutoCAD Dynamic Blocks :: Text In Blocks
Oct 4, 2012I want to create some symbols which includes text. For example, I have a square with an "F" centered within the square. The problem I am having is when I insert the block into a drawing and rotate it, the "F" also rotates. Is there any way to make it so the "F" is always horizontal no matter how I rotate the block?
View 2 Replies View RelatedAutoCAD Dynamic Blocks :: Annotative Blocks
Aug 17, 2012I've just started to learn how to use Annotative Blocks and i'm running into what is probably a very simple problem. I'm creating a block and want to assign annotative scales to it. Once created, I insert the block into the drawing I need to use it in, and the only scale that shows up is the scale that is active when inserted.
All the other scales I added when creating the block are gone and I then have to assign the scales to the block again. I would prefer not to have to manually assign the scales every time the block in inserted into a drawing.
AutoCAD Dynamic Blocks :: Changes Persist To All Blocks
Aug 8, 2012when I modify a dynamic block, that change persists to all other dynamic block that I have in the drawing. For instance, when I stretch the tail of a section callout, every other section callout stretches as well, which is quite inconvenient as you can imagine. I need each individual blocks changes to be independent of the others.
View 8 Replies View RelatedAutoCAD Dynamic Blocks :: Annotative Parameters Inside Dynamic Blocks
May 5, 2010I've made annotative blocks and I've made dynamic blocks... My intent is to integrate both but I can't find a way to move dynamic block parameters separately at different annotative scales.
In other words, if I insert an annotative dimension and add multiple scales I can move the dimension grips independently at each scale. If I insert a dynamic block I want to be able to use the dynamic block's action "grips" to do the same. However, with a dynamic block, if I move a stretch action at one annotation scale it moves the action at all annotation scales.
The attached file shows a simple example.
AutoCad :: Scale Up 100+ Blocks At Once And Have Each Base Point As Blocks Insert Point?
Jan 25, 2013Can I scale up a 100+ blocks at once and have each base point as the blocks insert point?
View 9 Replies View RelatedAutoCAD Dynamic Blocks :: Adding One Action To Dynamic Blocks
Mar 15, 2012I have created a dynamic block with several visiblility states. The block works great for what I need it for. however, I am trying to add one more action to the block but am having issues.
This block is essentially a 24" retail cabinet with the visibility states showing the different drawer and shelf configurations. I want to be able to lengthen the cabinet in 24" increments and have the visibility show for each 24" section.....e.g. I want a 10' cabinet so I bring in the 24" starter block. Then stretch the cabinet to the 10' mark, then I can chose any drawer/shelve config for each 24" section (they are all different).
I can get the block to stretch in 24" sections....no problem.....i just want the visibility state to be duplicated as well for each section. Now as it stretches, there is only one Vis state and it only populates the first cabinet.
I could do this by copying the block over and over 5 times.....but I am hoping there is a way to make this dynamic.
AutoCAD Dynamic Blocks :: Insertion Point On Dynamic Blocks
Apr 23, 2013I have a block I am making into a Dynamic Block. I will be adding in different visibility states. Depending on the visibility state the block would need to be inserted from a different point.
My question is, is it possible to add multiple insertion points to a dynamic block so depending on the visibility state it defaults to the correct insertion point?
AutoCAD Dynamic Blocks :: Stretching Dynamic Blocks
Sep 7, 2012is there a way to make dynamic blocks stretchable similar to a mleader,
the blocks i create are only stretchable by grips, and not by crossing
(i am using linear or point parameter stretches)
